Tadeu Castro da Silva | Additive manufacturing technologies | Best Researcher Award

Posted on by ScienceFather

Assist. Prof. Dr Tadeu Castro da Silva | Additive manufacturing technologies | Best Researcher Award

Prof. Dr-Ing, National Institute of Technology, Portugal

T.C. da Silva is a researcher and engineer with a strong background in mechanical engineering. He holds a PhD from the University of Brasília and has completed postdoctoral research at various institutions. Silva’s research focuses on smart materials, additive manufacturing, and thermal characterization.

Profile

orcid

scholar

Education 🎓

PhD in Mechanical Engineering, University of Brasília (2019)  Master’s in Mechanical Engineering, University of Brasília (2014)  Specialization in Software Engineering, Catholic University of Brasília (2009-2010)  Bachelor’s in Mechanical Engineering, University for the Development of the State and Region of Pantanal (2003-2008)

Experience 🧪

Researcher, University of Brasília (2012-present)  Postdoctoral researcher, University of Brasília (2020-2021)  Engineer, Brazilian Air Force (2011-2012)  Professor, Federal Institute of Education, Science, and Technology (2005-2007)

Awards & Honors🏆

Unfortunately, the provided text does not mention any specific awards or honors received by T.C. da Silva.

Research Focus 🔍

Smart materials and structures  Additive manufacturing (3D/4D printing) Thermal characterization of materials  Shape memory alloys

Publications📚

1. The effect of a chemical additive on the fermentation and aerobic stability of high-moisture corn 🌽🧬 (2015)
2. Filho TC da Silva, E Sallica-Leva, E Rayón, CT Santos transformation 🔩🔧 (2018)
3. Emissivity measurements on shape memory alloys 🔍💡 (2016)
4. Development of a gas metal arc based prototype for direct energy deposition with micrometric wire 💻🔩 (2024)
5. Influence of Deep Cryogenic Treatment on the Pseudoelastic Behavior of the Ni57Ti43 Alloy ❄️💡 (2022)
6. Stainless and low-alloy steels additively manufactured by micro gas metal arc-based directed energy deposition: microstructure and mechanical behavior 🔩🔧 (2024)
7. Study of the influence of high-energy milling time on the Cu–13Al–4Ni alloy manufactured by powder metallurgy process ⚗️💡 (2021)
8. Cryogenic treatment effect on NiTi wire under thermomechanical cycling ❄️💡 (2018)
9. Effect of Cryogenic Treatment on the Phase Transformation Temperatures and Latent Heat of Ni54Ti46 Shape Memory Alloy ❄️💡 (2022)
10. Cryogenic Treatment Effect on Cyclic Behavior of Ni54Ti46 Shape Memory Alloy ❄️💡 (2021)
11. Influence of thermal cycling on the phase transformation temperatures and latent heat of a NiTi shape memory alloy 🔩🔧 (2017)
12. Effect of the Cooling Time in Annealing at 350°C on the Phase Transformation Temperatures of a Ni55Ti45 wt. Alloy 🔩🔧 (2015)
13. Experimental evaluation of the emissivity of a NiTi alloy 🔍💡 (2015)
14. Microstructure, Thermal, and Mechanical Behavior of NiTi Shape Memory Alloy Obtained by Micro Wire and Arc Direct Energy Deposition 🔩🔧 (2025)
15. Low-Annealing Temperature Influence in the Microstructure Evolution of Ni53Ti47 Shape Memory Alloy 🔩🔧 (2024)
16. Use of Infrared Temperature Sensor to Estimate the Evolution of Transformation Temperature of SMA Actuator Wires 🔍💡 (2023)
17. Use of infrared temperature sensor to estimate the evolution of transformation temperature of SMA actuator wires 🔍💡 (2021)
18. Effet du traitement cryogénique sur le comportement cyclique de l’alliage Ni54Ti46 à mémoire de forme ❄️💡 (2020)
19. Efeito de tratamento criogênico no comportamento cíclico da liga Ni54Ti46 com memória de forma ❄️💡 (2020)
20. Functional and Structural Fatigue of NiTi Shape Memory Wires Subject to Thermomechanical Cycling 🔩🔧 (2019)

Conclusion

T.C. da Silva is an accomplished researcher with a strong track record in additive manufacturing, materials science, and mechanical engineering. His extensive research experience, interdisciplinary approach, and commitment to knowledge sharing make him an ideal candidate for the Best Researcher Award. By addressing areas for improvement, he can continue to grow as a researcher and make even more significant contributions to his field.

Xueliang Xiao | Shape memery polymers | Best Researcher Award

Posted on by ScienceFather

Prof. Xueliang Xiao | Shape memery polymers | Best Researcher Award

Dirctor, Jiangnan University, China

Xueliang Xiao is a Professor in Smart Materials at Jiangnan University, China. He received his Ph.D. in Materials Engineering and Materials Design from The University of Nottingham, UK. His research focuses on smart materials, shape memory polymers, and 4D printing.

Profile

scholar

Education 🎓

Xueliang Xiao received his Ph.D. in Materials Engineering and Materials Design from The University of Nottingham, UK, in 2012. He was supervised by Prof. Andrew C. Long.

Experience 🧪

Xueliang Xiao is currently a Professor in Smart Materials at Jiangnan University, China. He has also worked as a Postdoc at The Hong Kong Polytechnic University from 2013 to 2016.

Awards & Honors �

Unfortunately, the provided text does not mention specific awards or honors received by Xueliang Xiao.

Research Focus 🔍

Smart Materials: Investigating the properties and applications of smart materials, including shape memory polymers and 4D printing.  Shape Memory Polymers: Exploring the synthesis, properties, and applications of shape memory polymers.. 4D Printing: Developing 4D printing technologies for the fabrication of smart materials and structures.

Publications📚

1. Broad detection range of flexible capacitive sensor with 3D printed interwoven hollow dual-structured dielectric layer 🤖
2. Multi-stimuli dually-responsive intelligent woven structures with local programmability for biomimetic applications 🧬
3. Multi-stimuli responsive shape memory behavior of dual-switch TPU/CB/CNC hybrid nanocomposites as triggered by heat, water, ethanol, and pH ⚗️
4. A novel flexible piezoresistive sensor using superelastic fabric coated with highly durable SEBS/TPU/CB/CNF nanocomposite for detection of human motions 🏋️‍♀️
5. 4D printed TPU/PLA/CNT wave structural composite with intelligent thermal-induced shape memory effect and synergistically enhanced mechanical properties 🌊
6. Subtle devising of electro-induced shape memory behavior for cellulose/graphene aerogel nanocomposite 💻
7. Aerogels with shape memory ability: Are they practical? -A mini-review ❓
8. Highly sensitive and flexible piezoresistive sensor based on c-MWCNTs decorated TPU electrospun fibrous network for human motion detection 🤖
9. Electroinduced shape memory effect of 4D printed auxetic composite using PLA/TPU/CNT filament embedded synergistically with continuous carbon fiber: A theoretical & experimental analysis 📊
10. Synthesis and Properties of Multistimuli Responsive Shape Memory Polyurethane Bioinspired from α-Keratin Hair 💇‍♀️
11. Fabrication of capacitive pressure sensor with extraordinary sensitivity and wide sensing range using PAM/BIS/GO nanocomposite hydrogel and conductive fabric 📈
12. Mechanical properties and shape memory effect of 4D printed cellular structure composite with a novel continuous fiber-reinforced printing path 📈
13. Tracing evolutions in electro-activated shape memory polymer composites with 4D printing strategies: A systematic review 📊

Conclusion 🏆

Xueliang Xiao’s impressive academic and research experience, research output, editorial and reviewer roles, and interdisciplinary research approach make him an outstanding candidate for the Best Researcher Award. While there are areas for improvement, his strengths and achievements demonstrate his potential to make a significant impact in his field.

Garima Mathur | Functionalization of biomaterials | Women Researcher Award

Posted on by ScienceFather

Mr. Garima Mathur | Functionalization of biomaterials | Women Researcher Award

Mr. Jaypee Institute of Technology, India

Mr. Garima Mathur holds a Ph.D. from the Indian Institute of Technology Roorkee (2008), an M.Sc. in Biotechnology from Panjab University, Chandigarh (2002), and a B.Sc. in Biotechnology from Kurukshetra University (2000). Currently, she is an Assistant Professor (Senior grade) at the Department of Biotechnology, Jaypee Institute of  Technology, Noida. Her professional journey includes roles as Assistant Professor (Gr-II and Gr-I), Research Associate, and Postdoctoral Fellow in prestigious institutions. She has worked as a Scientist in Application R&D at Novozymes South Asia Pvt. Ltd. Bangalore. Dr. [Your Name] is a recipient of several awards, including a GATE Life Science score of 97.79 percentile and a CSIR-UGC JRF, among others.

Professional Profiles:

Scopus

🎓 Academic Qualifications

2008: PhD, Indian Institute of Technology Roorkee (India)
2002: M.Sc. (Biotechnology), Panjab University, Chandigarh
2000: B.Sc. (Biotechnology), Kurukshetra University

👨‍🏫 Professional Experience 

Assistant Professor (Senior grade), Department of Biotechnology, Jaypee Institute of Technology, Noida. September 2018 onwards
Assistant Professor (Gr-II), Department of Biotechnology, Jaypee Institute of Technology, Noida. Jan 1, 2016 – September 2018
Assistant Professor (Gr-I), Department of Biotechnology, Jaypee Institute of Technology, Noida. Aug 1, 2013 – Dec 31, 2015
Research Associate, Department of Biotechnology, Jaypee Institute of  Technology, Noida. Dec 21, 2010 – Aug 1, 2013
Post Doctoral Fellow, Department of Biotechnology and Bioinformatics, Jaypee University of Technology, Waknaghat. Feb 9, 2010 – Dec 14, 2010
Scientist in Application R&D, Novozymes South Asia Pvt. Ltd., Bangalore. Dec 2009 – June 2009
Research Associate, Department of Biochemical Engineering and Biotechnology, Indian Institute of Technology Delhi (INDIA) on a DBT-funded project. Dec 2007 – April 2008

🏆 Awards and Honors

GATE in Life Science (2002): Score 97.79 percentile (All India rank 53)
CSIR-UGC (NET) JRF in Life Science (June 2003)
Agricultural Scientists Recruitment Board National Eligibility Test (2003)
Women Scientist Scholarship Scheme (2003), TIFAC, DST, New Delhi
Gold Medal in M.Sc. (Biotechnology) from Panjab University, Chandigarh
Travel Grant Support by Dept. of Science and Technology, Govt of India for oral presentation at BIOMICROWORLD 2013, Madrid, Spain. October 2-4, 2013

✍️Publications Top Note :

Production and Characterization of Bacterial Cellulose Synthesized by Komagataeibacter sp. Isolated from Rotten Coconut Pulp

Authors: Srivastava, S., Mathur, G.
Journal: Asian Journal of Chemistry
Year: 2024
Volume: 36
Issue: 5
Pages: 1183–1190
Type: Open access
Citations: 0
Abstract: This link is disabled.
Related Documents: This link is disabled.

Current Trends in Chitosan Functionalization Methods and Their Applications

Authors: Pandey, R., Mathur, G.
Journal: Starch/Staerke
Year: 2024
Type: Review, Article in Press
Citations: 0
Abstract: This link is disabled.
Related Documents: This link is disabled.

Statistical Optimization of Bioprocess Parameters for Enhanced Production of Bacterial Cellulose from K. saccharivorans BC-G1

Authors: Srivastava, S., Mathur, G.
Journal: Brazilian Journal of Microbiology
Year: 2024
Type: Article in Press
Citations: 0
Abstract: This link is disabled.
Related Documents: This link is disabled.

Biopolymer-Based Biosensors: Fabrication and Properties

Authors: Pandey, R., Mathur, G.
Book: Springer Proceedings in Materials
Year: 2024
Volume: 37
Pages: 89–98
Type: Book Chapter
Citations: 0
Abstract: This link is disabled.
Related Documents: This link is disabled.

Bacterial Cellulose: A Multipurpose Biomaterial for Manmade World

Authors: Srivastava, S., Mathur, G.
Journal: Current Applied Science and Technology
Year: 2023
Volume: 23
Issue: 3
Type: Open access, Review
Citations: 1
Abstract: This link is disabled.
Related Documents: This link is disabled.

Komagataeibacter saccharivorans Strain BC-G1: An Alternative Strain for Production of Bacterial Cellulose

Authors: Srivastava, S., Mathur, G.
Journal: Biologia
Year: 2022
Volume: 77
Issue: 12
Pages: 3657–3668
Citations: 4
Abstract: This link is disabled.
Related Documents: This link is disabled.

Effect of Different Media on Growth Kinetics Parameters of Aspergillus ochraceus: An Approach Towards Production of Fungal Biomass

Authors: Rahman, R.U., Mathur, G.
Journal: Current Trends in Biotechnology and Pharmacy
Year: 2021
Volume: 15
Issue: 6
Pages: 1–3
Citations: 1
Abstract: This link is disabled.
Related Documents: This link is disabled.

Current Research and Perspectives on Microalgae-Derived Biodiesel

Authors: Singh, K., Kaloni, D., Gaur, S., Kushwaha, S., Mathur, G.
Journal: Biofuels
Year: 2020
Volume: 11
Issue: 1
Pages: 1–18
Citations: 19
Abstract: This link is disabled.
Related Documents: This link is disabled.

Evaluating the Therapeutic Efficiency and Drug Targeting Ability of Alkaloids Present in Rauwolfia serpentina

Authors: Singh, M., Kaur, R., Rajput, R., Mathur, G.
Journal: International Journal of Green Pharmacy
Year: 2017
Volume: 11
Issue: 3
Pages: 132–142
Citations: 18
Abstract: This link is disabled.
Related Documents: This link is disabled.

Effect of Carbon Sources on Physicochemical Properties of Bacterial Cellulose Produced from Gluconacetobacter xylinus MTCC 7795

Authors: Singh, R., Mathur, A., Goswami, N., Mathur, G.
Journal: E-Polymers
Year: 2016
Volume: 16
Issue: 4
Pages: 331–336
Citations: 10
Abstract: This link is disabled.
Related Documents: This link is disabled.

Prof. Cheong Hoon Kwon | Nanobio Sensors | Best Researcher Award

Posted on by ScienceFather

Prof. Cheong Hoon Kwon | Nanobio Sensors | Best Researcher Award

Dr. Sankarganesh, Kangwon National University, South Korea

Prof. Cheong Hoon Kwon is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

 

Professional Profiles:

Scopus

Orcid

Education 📚

Korea University (2004-2008)

Degree: Ph.D. in Chemical and Biological EngineeringGPA: 4.36/4.50Thesis Title: “Molecular Modeling and Experimental Study of Enzymatic Reaction using CALB in Supercritical Carbon Dioxide”Advisor: Professor Jeong Won KangKorea University (2001-2004)

Degree: M.S. in Chemical and Biological EngineeringGPA: 4.22/4.50Thesis Title: “Experimental Measurements and Predictions of Excess Enthalpies for Binary Mixtures of N-Alkane+1-Alkanol Systems”Advisor: Professor Chul Soo LeeGachon University, Seongnam City, Korea (1997-2001)

Degree: B.S. in Chemical EngineeringGPA: 4.13/4.50

Research Interests 🔬

Electrochemical Devices for Energy Generation and StorageInterfacial Design of Electrochemical Electrodes Using EnzymeNano/Bio Functional Materials and Surface ModificationEnvironmental Actuators and SensorsThermodynamics and Molecular Modeling (QM/MM) of Chemical Reactions

Research Experience 🧪

Research Professor, Department of Chemical and Biological Engineering, Korea University (2016-present)Research Professor, National Creative Research Initiative Center for Bio-Artificial Muscle, Department of Biomedical Engineering, Hanyang University (2010-2015)Postdoctoral Research Fellow, Department of Medicine, Harvard Medical School (HMS), Cambridge, MA, USA (2009-2010)Advisor: Prof. Ali Khademhosseini, Ph.D.Institute of Clean Chemical Engineering Systems, Seoul, Korea (2004-2008)

Teaching Experience 👨‍🏫

Lecturer, Department of Biomedical Engineering, Hanyang University, Seoul, Korea (2013-2014)Courses Taught: Bioenergy EngineeringAdjunct Professor, Department of Nano-Chemical Engineering, Soonchunhyang University, Asan, Chungnam, Korea (2008)Courses Taught: Engineering Mathematics, Thermodynamics, Heat and Mass Transport, Transport PhenomenaLecturer, Department of Nano-Chemical Engineering, Soonchunhyang University, Asan, Chungnam, Korea (2007)Courses Taught: Physical Chemistry, Basic Principles and Calculations in Chemical Engineering, ThermodynamicsTeacher-Assistant, Korea University, Seoul, Korea (2001-2006)Courses Assisted: Thermodynamics, Separation Process, Engineering Mathematics

 

📖 Publications Top Note :

Highly efficient water-splitting electrodes with stable operation at 3 A cm−2 in alkaline media through molecular linker assembly-induced all-in-one structured NiMo and NiFe electrocatalysts

Authors: Son, Y., Mo, J., Yong, E., Kim, M., Cho, J.

Journal: Applied Catalysis B: Environmental, 2024, 343, 123563

Experimental investigation on acceleration of working fluid of heat pipe under bypass line operation

Authors: Kwon, C.H., Kwon, H.S., Oh, H.U., Jung, E.G.

Journal: Case Studies in Thermal Engineering, 2024, 53, 103742

A Mediator-Free Multi-Ply Biofuel Cell Using an Interfacial Assembly between Hydrophilic Enzymes and Hydrophobic Conductive Oxide Nanoparticles with Pointed Apexes

Authors: Kang, M., Nam, D., Ahn, J., Kwon, C.H., Cho, J.

Journal: Advanced Materials, 2023, 35(51), 2304986

An experimental investigation on the influence of condenser bypass area for the transient and steady-state heat-transfer performance of heat pipes

Authors: Kwon, C.H., Kwon, H.S., Jung, E.G.

Journal: International Communications in Heat and Mass Transfer, 2023, 148, 107057

Influence of condenser bypass port area on maximum thermal load of heat pipe

Authors: Kwon, C.H., Jin, G.C., Kim, J.H., Jeong, J.H., Jung, E.G.

Journal: International Communications in Heat and Mass Transfer, 2023, 148, 107006

Carbon Nanocluster-Mediated Nanoblending Assembly for Binder-Free Energy Storage Electrodes with High Capacities and Enhanced Charge Transfer Kinetics

Authors: Song, Y., Bae, W., Ahn, J., Ko, Y., Cho, J.

Journal: Advanced Science, 2023, 10(22), 2301248

All-in-one structured textile energy storage electrodes prepared via Janus bond assembly-induced electrodeposition

Authors: Lee, S., Ko, Y., Chang, W., Yeom, B., Cho, J.

Journal: Chemical Engineering Journal, 2023, 454, 140150

Overshoot temperature control on evaporator wall of loop heat pipe for space vehicle thermal control through bypass line under high thermal load

Authors: Hoon Kwon, C., Guk Jung, E.

Journal: Applied Thermal Engineering, 2023, 219, 119446

Heat Transfer Performance Analysis and Simulation of Heat Pipe Heat Exchanger | 히트파이프 열교환기의 열전달 성능해석 및 모사

Authors: Kwon, H.S., Kwon, C.H., Jung, E.G.

Journal: Transactions of the Korean Society of Mechanical Engineers, B, 2023, 47(11), pp. 595–605

Redox-active ligand-mediated assembly for high-performance transition metal oxide nanoparticle-based pseudocapacitors

Authors: Ahn, J., Song, Y., Kim, Y.J., Lee, S.J., Cho, J.

Journal: Chemical Engineering Journal, 2023, 455, 140742

 

Prof. Sanghun Jeon | Artificial Nerve System | Outstanding Scientist Award

Posted on by ScienceFather

Prof. Sanghun Jeon | Artificial Nerve System | Outstanding Scientist Award

Prof. Sanghun Jeon, Korea Advanced Institute of Science and Technology, South Korea

Prof. Sanghun Jeon is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

 

Professional Profiles:

Google scholar

Education 🎓

Gwangju Institute of Science and Technology (GIST)
Ph.D. degree in Electronic Materials Program (with Best Paper Award Honors), Feb. 2003
Dissertation Title: Studies of the electrical and physical characteristics of ultrathin high k gate dielectrics for metal-oxide-semiconductor (MOS) device applications

Experience 🧑‍🔬

KAIST (Google Scholar: In total, 12081 citations, h-index 53. Since 2019, 6343 citations, h-index 38)
Feb. 2018 – Present
Tenured Full Professor, School of Electrical EngineeringLaunched research efforts in AI semiconductors using functional ferroelectric materials and devices, IoT sensors, and stretchable displays.KOREA University (with Seoktap Research Awards)
Mar. 2013 – Feb. 2018
Associate Professor, Department of Applied PhysicsLaunched research efforts in wearable sensors, multimodal sensors, hafnia ferroelectric 1T DRAM, and hafnia ferroelectric tunnel junctions for logic-in-memory device applications.SAMSUNG ELECTRONICS and SAMSUNG Advanced Institute of Technology
Mar. 2003 – Feb. 2013
Senior and Principal Research Staff MemberPerformed research on oxide thin-film transistors for CMOS image sensors, displays, photo-sensors, and high-power devices.Process and device engineer for graphene, 3D transistors, and hybrid semiconductor devices.Developed the world’s first 32Gb NAND Flash Technology (4X nm generation, 2006) and 8Gb & 16Gb NAND Flash Technology (6Xnm generation, 2005) using charge trap flash memory devices.

Research Interests 🔍

NAND Flash with Ferroelectric MaterialsHybrid NAND Flash with Negative Capacitance Ferroelectric MaterialsHigh Dielectric Constant Morphotropic Phase Materials for DRAM CapacitorsHfO2 1T DRAM Nonvolatile Logic Device for Deep Learning ApplicationsComputing-in-Memory Hardware: 3-Terminal Device and Architecture for Deep Neural NetworksFerroelectric Tunnel JunctionsTextile Sensors for Wearable/Flexible ElectronicsAI-Inspired Tactile Sensing Applications with Machine Learning Algorithms

Academic Contribution 📚

IEEE Senior MemberVice Chair of Advanced and Emerging Memories / New Applications in International Conference on Solid State Device and Materials (SSDM) (2015 – Present)Associate Editor of Springer Nanoconvergence (2018 – Present)Associate Editor of IEEE/OSA Journal of Display Technology (2013 – 2016)Organizing Committee and Track Chair of IEEE FLEPS (2021 – Present)Public Chair of IEEE FLEPS (2022)Focused Session Chair of IEEE FLEPS (2023 – 2024)Editorial Board Member of Nature Publication Group Scientific Reports (2015 – Present)Editorial Board Member of IEEE Journal on Flexible Electronics (2022 – Present)

Awards 🏆

Springer Nano Convergence Contribution Award (2022)KAIST Best Lecturer Award (2022)SK Hynix IDEA Silver Award (2019)KOREA University SEOKTAP Research Award (2018)Samsung Future Technology Foundation Research Grant (2017)IAAM Young Scientist Award Medal (2016)IMID Best Paper Award (2016)Samsung Paper Champion Award (2013)Samsung Advanced Institute of Technology Innovation Award (2012)Samsung Best Paper Award (2011)Samsung Group Grand Award (2006)Young Researcher Award (2002)

📖 Publications Top Note :

Highly Stretchable Resistive Pressure Sensors Using a Conductive Elastomeric Composite on a Micropyramid Array

CL Choong, MB Shim, BS Lee, S Jeon, DS Ko, TH Kang, J Bae, SH Lee, …
Journal: Advanced Materials
Citations: 1221
Year: 2014

Highly Stretchable Electric Circuits from a Composite Material of Silver Nanoparticles and Elastomeric Fibres

M Park, J Im, M Shin, Y Min, J Park, H Cho, S Park, MB Shim, S Jeon, …
Journal: Nature Nanotechnology
Citations: 943
Year: 2012

High Performance Amorphous Oxide Thin Film Transistors with Self-Aligned Top-Gate Structure

JC Park, SW Kim, SI Kim, H Yin, JH Hur, SH Jeon, SH Park, IH Song, …
Journal: IEEE International Electron Devices Meeting (IEDM)
Citations: 623
Year: 2009

Gated Three-Terminal Device Architecture to Eliminate Persistent Photoconductivity in Oxide Semiconductor Photosensor Arrays

S Jeon, SE Ahn, I Song, CJ Kim, UI Chung, E Lee, I Yoo, A Nathan, S Lee, …
Journal: Nature Materials
Citations: 480
Year: 2012

A Flexible Bimodal Sensor Array for Simultaneous Sensing of Pressure and Temperature

NT Tien, S Jeon, DI Kim, TQ Trung, M Jang, BU Hwang, KE Byun, J Bae, …
Journal: Advanced Materials
Citations: 436
Year: 2014

Trap-Limited and Percolation Conduction Mechanisms in Amorphous Oxide Semiconductor Thin Film Transistors

S Lee, K Ghaffarzadeh, A Nathan, J Robertson, S Jeon, C Kim, IH Song, …
Journal: Applied Physics Letters
Citations: 306
Year: 2011

HfZrOx-Based Ferroelectric Synapse Device with 32 Levels of Conductance States for Neuromorphic Applications

S Oh, T Kim, M Kwak, J Song, J Woo, S Jeon, IK Yoo, H Hwang
Journal: IEEE Electron Device Letters
Citations: 246
Year: 2017

Effect of Hygroscopic Nature on the Electrical Characteristics of Lanthanide Oxides

S Jeon, H Hwang
Journal: Journal of Applied Physics
Citations: 190
Year: 2003

Metal Oxide Thin Film Phototransistor for Remote Touch Interactive Displays

SE Ahn, I Song, S Jeon, YW Jeon, Y Kim, C Kim, B Ryu, JH Lee, A Nathan, …
Journal: Advanced Materials
Citations: 166
Year: 2012

Amorphous Oxide Semiconductor TFTs for Displays and Imaging

A Nathan, S Lee, S Jeon, J Robertson
Journal: Journal of Display Technology
Citations: 165
Year: 2014

Hot Carrier Trapping Induced Negative Photoconductance in InAs Nanowires Toward Novel Nonvolatile Memory

Y Yang, X Peng, HS Kim, T Kim, S Jeon, HK Kang, W Choi, J Song, …
Journal: Nano Letters
Citations: 164
Year: 2015

Persistent Photoconductivity in Hf–In–Zn–O Thin Film Transistors

K Ghaffarzadeh, A Nathan, J Robertson, S Kim, S Jeon, C Kim, UI Chung, …
Journal: Applied Physics Letters
Citations: 162
Year: 2010

The Effect of the Bottom Electrode on Ferroelectric Tunnel Junctions Based on CMOS-Compatible HfO2

Y Goh, S Jeon
Journal: Nanotechnology
Citations: 152
Year: 2018

Instability in Threshold Voltage and Subthreshold Behavior in Hf–In–Zn–O Thin Film Transistors Induced by Bias-and Light-Stress

K Ghaffarzadeh, A Nathan, J Robertson, S Kim, S Jeon, C Kim, UI Chung, …
Journal: Applied Physics Letters
Citations: 133
Year: 2010

Oxygen Vacancy Control as a Strategy to Achieve Highly Reliable Hafnia Ferroelectrics Using Oxide Electrode

Y Goh, SH Cho, SHK Park, S Jeon
Journal: Nanoscale
Citations: 123
Year: 2020

Non-Volatile Semiconductor Memory Device with Alternative Metal Gate Material

SH Jeon, J Han, C Kim
Journal: US Patent 7,391,075
Citations: 122
Year: 2008

Electrical Characteristics of Prepared by Annealing of

S Jeon, CJ Choi, TY Seong, H Hwang
Journal: Applied Physics Letters
Citations: 119
Year: 2001

180nm Gate Length Amorphous InGaZnO Thin Film Transistor for High Density Image Sensor Applications

S Jeon, S Park, I Song, JH Hur, J Park, S Kim, S Kim, H Yin, E Lee, S Ahn, …
Journal: International Electron Devices Meeting
Citations: 116
Year: 2010

Transparent Semiconducting Oxide Technology for Touch Free Interactive Flexible Displays

S Lee, S Jeon, R Chaji, A Nathan
Journal: Proceedings of the IEEE
Citations: 114
Year: 2015

Excellent Electrical Characteristics of Lanthanide (Pr, Nd, Sm, Gd, and Dy) Oxide and Lanthanide-Doped Oxide for MOS Gate Dielectric Applications

S Jeon, K Im, H Yang, H Lee, H Sim, S Choi, T Jang, H Hwang
Journal: International Electron Devices Meeting
Citations: 114
Year: 2001

Dr. Masih Paknejad | precision machining Award | Best Researcher Award

Posted on by ScienceFather

Dr. Masih Paknejad | precision machining Award | Best Researcher Award

Dr. Masih Paknejad, KSF (Kompetenzzentrum für Spanende Fertigung), Germany

Dr. Masih Paknejad is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

Professional Profiles:

Orcid

Google scholar

Work Experience 🛠️

Institute of Advanced Machining (KSF), GermanyTeam Leader, Postdoctoral Research Fellow2023 – PresentMachine Tools Committee ISO/ISIRI TC 39, IranSenior Member, Chief and Technical Editor of Machine Tools Standards2022 – PresentTurbine Engineering and Manufacturing Co. (TUGA), IranExpert Engineer (R&D Department)2019 – 2021Persian Ultrasonic Co., IranCEO, Design and Manufacture of High Power Ultrasonic Transducer2019 – PresentHitec-Machinery Trading Co., IranTechnical Advisor, Supervisor of Test and Calibration of Machine Tools2017 – 2019Semnan University, IranLecturer2018 – 2019Courses: Materials Science and Engineering, Metrology Lab., Machine Tools Workshop, Engineering Drawing, Hydraulics and Hydraulics Lab, Welding WorkshopAmirkabir University of Technology, IranStrength of Material Lab Expert, Metrology Lab Expert, Teacher Assistant2012 – 2018Courses: Nontraditional Manufacturing Processes, Machine Element DesignIslamic Azad University (Saveh Branch), IranLecturer2011 – 2012Courses: Metrology, Production Methods, Nontraditional Manufacturing Processes

Education 🎓

Furtwangen University – KSF Institute
Feb 2022 – Sep 2023Postdoc FellowTitle: Ultras-Short Pulse Laser-Assisted Micro-Grinding of Silicon CeramicsAmirkabir University of TechnologySep 2011 – Nov 2017
Ph.D.Dissertation: Theoretical-Experimental Model of Heat Generation in Ultrasonic Assisted Dry Creep Feed Grinding ProcessFurtwangen University – KSF Institute
Jun 2014– Jan 2015Sabbatical ResearcherAmirkabir University of TechnologySep 2008 – Jul 2011M.Sc.Thesis: Theoretical and Experimental Analysis of Ultrasonic Assisted Indentation Forming of TubeIsfahan University of TechnologySep 2004– Sep 2008B.Sc.Thesis: Design of Centrifugal Chip Lubricant Separator DeviceAwards & Honors 🏆Scholarship Award granted by the Ministry of Science Research and Technology of IranAward of the Alborz Regional Innovation and Flourishing Festival, National Elites FoundationPatent for “Design and Manufacture of Ultrasonic Assisted Indentation Forming Device”Award of Elite Entrance, National Organization for Educational Testing (NOET)Ranked 3rd among 39 Undergraduate Students, Mechanical Engineering Department, Isfahan University of TechnologyComputer Skills 💻Mechanical Eng. Software: ABAQUS, ANSYS, CATIA, MasterCAM, MSC Visual

Nastran, Automation StudioProgramming Language: MATLABSoftware Packages: Microsoft Office, Windows

Awards & Honors 🏆

Scholarship Award granted by the Ministry of Science Research and Technology of IranAward of the Alborz Regional Innovation and Flourishing Festival, National Elites FoundationPatent for “Design and Manufacture of Ultrasonic Assisted Indentation Forming Device”Award of Elite Entrance, National Organization for Educational Testing (NOET)Ranked 3rd among 39 Undergraduate Students, Mechanical Engineering Department, Isfahan University of Technology

Computer Skills 💻

Mechanical Eng. Software: ABAQUS, ANSYS, CATIA, MasterCAM, MSC Visual Nastran, Automation StudioProgramming Language: MATLABSoftware Packages: Microsoft Office, Windows

📊 Citation Metrics (Google Scholar):

Citations by: All – 87, Since 2019 – 70
h-index: All – 3, Since 2018 – 3
i10 index: All – 3, Since 2018 –3

 

📖 Publications  Top Note :

Investigation of laser-assisted cylindrical grinding of silicon nitride ceramics with controlled damage zone

Journal: Optics & Laser Technology

Date: July 2024

DOI: 10.1016/j.optlastec.2024.110616

Contributors: Esmaeil Ghadiri Zahrani; Masih Paknejad; Ali Zahedi; Bahman Azarhoushang

Laser-assisted surface grinding of innovative superhard SiC-bonded diamond (DSiC) materials

Journal: Ceramics International

Date: February 2024

DOI: 10.1016/j.ceramint.2024.02.323

Contributors: Masih Paknejad; Bahman Azarhoushang; Ali Zahedi; Mehdi Khakrangin; Robert Bösinger; Faramarz Hojati

Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching

Journal: The International Journal of Advanced Manufacturing Technology

Date: March 2023

DOI: 10.1007/s00170-022-10793-0

Contributors: Masih Paknejad; Bahman Azarhoushang; Ali Zahedi; Mehdi Khakrangin; Mohammad Ali Kadivar

Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratching

Date: September 2, 2022

DOI: 10.21203/rs.3.rs-1974605/v1

Contributors: Masih Paknejad; Bahman Azarhoushang; Ali Zahedi; Mehdi Khakrangin; Mohammad Ali Kadivar

Ductile-brittle transition mechanisms in micro-grinding of silicon nitride

Journal: Ceramics International

Date: August 2022

DOI: 10.1016/j.ceramint.2022.08.088

Contributors: Masih Paknejad

Numerical Simulation of Ultrasonic Assisted Indentation Tube Forming

Journal: ADMT Journal

Date: September 2020

DOI: 10.30495/admt.2020.1869462.1124

Contributors: Masih Paknejad

Effects of high power ultrasonic vibration on temperature distribution of workpiece in dry creep feed up grinding

Journal: Ultrasonics Sonochemistry

Date: November 2017

DOI: 10.1016/j.ultsonch.2017.04.029

Contributors: Masih Paknejad

Theoretical and experimental analyses of ultrasonic-assisted indentation forming of tube

Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Date: March 2014

DOI: 10.1177/0954405413501502

Contributors: Masih Paknejad