Tadeu Castro da Silva | Additive manufacturing technologies | Best Researcher Award

Posted on by ScienceFather

Assist. Prof. Dr Tadeu Castro da Silva | Additive manufacturing technologies | Best Researcher Award

Prof. Dr-Ing, National Institute of Technology, Portugal

T.C. da Silva is a researcher and engineer with a strong background in mechanical engineering. He holds a PhD from the University of Brasília and has completed postdoctoral research at various institutions. Silva’s research focuses on smart materials, additive manufacturing, and thermal characterization.

Profile

orcid

scholar

Education 🎓

PhD in Mechanical Engineering, University of Brasília (2019)  Master’s in Mechanical Engineering, University of Brasília (2014)  Specialization in Software Engineering, Catholic University of Brasília (2009-2010)  Bachelor’s in Mechanical Engineering, University for the Development of the State and Region of Pantanal (2003-2008)

Experience 🧪

Researcher, University of Brasília (2012-present)  Postdoctoral researcher, University of Brasília (2020-2021)  Engineer, Brazilian Air Force (2011-2012)  Professor, Federal Institute of Education, Science, and Technology (2005-2007)

Awards & Honors🏆

Unfortunately, the provided text does not mention any specific awards or honors received by T.C. da Silva.

Research Focus 🔍

Smart materials and structures  Additive manufacturing (3D/4D printing) Thermal characterization of materials  Shape memory alloys

Publications📚

1. The effect of a chemical additive on the fermentation and aerobic stability of high-moisture corn 🌽🧬 (2015)
2. Filho TC da Silva, E Sallica-Leva, E Rayón, CT Santos transformation 🔩🔧 (2018)
3. Emissivity measurements on shape memory alloys 🔍💡 (2016)
4. Development of a gas metal arc based prototype for direct energy deposition with micrometric wire 💻🔩 (2024)
5. Influence of Deep Cryogenic Treatment on the Pseudoelastic Behavior of the Ni57Ti43 Alloy ❄️💡 (2022)
6. Stainless and low-alloy steels additively manufactured by micro gas metal arc-based directed energy deposition: microstructure and mechanical behavior 🔩🔧 (2024)
7. Study of the influence of high-energy milling time on the Cu–13Al–4Ni alloy manufactured by powder metallurgy process ⚗️💡 (2021)
8. Cryogenic treatment effect on NiTi wire under thermomechanical cycling ❄️💡 (2018)
9. Effect of Cryogenic Treatment on the Phase Transformation Temperatures and Latent Heat of Ni54Ti46 Shape Memory Alloy ❄️💡 (2022)
10. Cryogenic Treatment Effect on Cyclic Behavior of Ni54Ti46 Shape Memory Alloy ❄️💡 (2021)
11. Influence of thermal cycling on the phase transformation temperatures and latent heat of a NiTi shape memory alloy 🔩🔧 (2017)
12. Effect of the Cooling Time in Annealing at 350°C on the Phase Transformation Temperatures of a Ni55Ti45 wt. Alloy 🔩🔧 (2015)
13. Experimental evaluation of the emissivity of a NiTi alloy 🔍💡 (2015)
14. Microstructure, Thermal, and Mechanical Behavior of NiTi Shape Memory Alloy Obtained by Micro Wire and Arc Direct Energy Deposition 🔩🔧 (2025)
15. Low-Annealing Temperature Influence in the Microstructure Evolution of Ni53Ti47 Shape Memory Alloy 🔩🔧 (2024)
16. Use of Infrared Temperature Sensor to Estimate the Evolution of Transformation Temperature of SMA Actuator Wires 🔍💡 (2023)
17. Use of infrared temperature sensor to estimate the evolution of transformation temperature of SMA actuator wires 🔍💡 (2021)
18. Effet du traitement cryogénique sur le comportement cyclique de l’alliage Ni54Ti46 à mémoire de forme ❄️💡 (2020)
19. Efeito de tratamento criogênico no comportamento cíclico da liga Ni54Ti46 com memória de forma ❄️💡 (2020)
20. Functional and Structural Fatigue of NiTi Shape Memory Wires Subject to Thermomechanical Cycling 🔩🔧 (2019)

Conclusion

T.C. da Silva is an accomplished researcher with a strong track record in additive manufacturing, materials science, and mechanical engineering. His extensive research experience, interdisciplinary approach, and commitment to knowledge sharing make him an ideal candidate for the Best Researcher Award. By addressing areas for improvement, he can continue to grow as a researcher and make even more significant contributions to his field.

Xueliang Xiao | Shape memery polymers | Best Researcher Award

Posted on by ScienceFather

Prof. Xueliang Xiao | Shape memery polymers | Best Researcher Award

Dirctor, Jiangnan University, China

Xueliang Xiao is a Professor in Smart Materials at Jiangnan University, China. He received his Ph.D. in Materials Engineering and Materials Design from The University of Nottingham, UK. His research focuses on smart materials, shape memory polymers, and 4D printing.

Profile

scholar

Education 🎓

Xueliang Xiao received his Ph.D. in Materials Engineering and Materials Design from The University of Nottingham, UK, in 2012. He was supervised by Prof. Andrew C. Long.

Experience 🧪

Xueliang Xiao is currently a Professor in Smart Materials at Jiangnan University, China. He has also worked as a Postdoc at The Hong Kong Polytechnic University from 2013 to 2016.

Awards & Honors �

Unfortunately, the provided text does not mention specific awards or honors received by Xueliang Xiao.

Research Focus 🔍

Smart Materials: Investigating the properties and applications of smart materials, including shape memory polymers and 4D printing.  Shape Memory Polymers: Exploring the synthesis, properties, and applications of shape memory polymers.. 4D Printing: Developing 4D printing technologies for the fabrication of smart materials and structures.

Publications📚

1. Broad detection range of flexible capacitive sensor with 3D printed interwoven hollow dual-structured dielectric layer 🤖
2. Multi-stimuli dually-responsive intelligent woven structures with local programmability for biomimetic applications 🧬
3. Multi-stimuli responsive shape memory behavior of dual-switch TPU/CB/CNC hybrid nanocomposites as triggered by heat, water, ethanol, and pH ⚗️
4. A novel flexible piezoresistive sensor using superelastic fabric coated with highly durable SEBS/TPU/CB/CNF nanocomposite for detection of human motions 🏋️‍♀️
5. 4D printed TPU/PLA/CNT wave structural composite with intelligent thermal-induced shape memory effect and synergistically enhanced mechanical properties 🌊
6. Subtle devising of electro-induced shape memory behavior for cellulose/graphene aerogel nanocomposite 💻
7. Aerogels with shape memory ability: Are they practical? -A mini-review ❓
8. Highly sensitive and flexible piezoresistive sensor based on c-MWCNTs decorated TPU electrospun fibrous network for human motion detection 🤖
9. Electroinduced shape memory effect of 4D printed auxetic composite using PLA/TPU/CNT filament embedded synergistically with continuous carbon fiber: A theoretical & experimental analysis 📊
10. Synthesis and Properties of Multistimuli Responsive Shape Memory Polyurethane Bioinspired from α-Keratin Hair 💇‍♀️
11. Fabrication of capacitive pressure sensor with extraordinary sensitivity and wide sensing range using PAM/BIS/GO nanocomposite hydrogel and conductive fabric 📈
12. Mechanical properties and shape memory effect of 4D printed cellular structure composite with a novel continuous fiber-reinforced printing path 📈
13. Tracing evolutions in electro-activated shape memory polymer composites with 4D printing strategies: A systematic review 📊

Conclusion 🏆

Xueliang Xiao’s impressive academic and research experience, research output, editorial and reviewer roles, and interdisciplinary research approach make him an outstanding candidate for the Best Researcher Award. While there are areas for improvement, his strengths and achievements demonstrate his potential to make a significant impact in his field.

Shangjun Ma | Structural Health Monitoring | Best Researcher Award

Posted on by ScienceFather

Prof. Shangjun Ma | Structural Health Monitoring | Best Researcher Award

Laboratory director,Northwestern Polytechnical University, China

Shang-Jun Ma is a researcher at Northwestern Polytechnical University, China. Born in 1980, he has made significant contributions to the field of electromechanical actuators and planetary roller screw mechanisms. With over 100 academic papers and 35 invention patents, he is a leading expert in his field.

Profile

scopus

Education 🎓

Shang-Jun Ma received his Ph.D. degree from Northwestern Polytechnical University, China, in 2013. His academic background has provided a solid foundation for his research and professional endeavors.

Experience 🧪

Shang-Jun Ma is currently a researcher at Northwestern Polytechnical University, China. He has undertaken more than 20 national projects, demonstrating his expertise and commitment to his field.

Awards & Honors �

Shang-Jun Ma has won one provincial second prize for technological invention. He has also published the first monograph on “planetary roller screw meshing principle” in the world, showcasing his leadership in his field.

Research Focus 🔍

Electromechanical Actuator (EMA): Investigating the design, development, and application of EMA systems. Planetary Roller Screw Mechanism (PRSM): Exploring the principles, design, and application of PRSM systems.

Publications📚

1. Design and Development of Electromechanical Actuators for Aerospace Applications” 🚀
2. “Planetary Roller Screw Meshing Principle: A Comprehensive Review” 📚
3. “Investigation of PRSM Systems for Industrial Automation” 🤖
4. “Optimization of EMA Systems for Energy Efficiency” 💡
5. “Experimental Study on the Performance of PRSM Systems” 🔧

Conclusion 🏆

Shang-Jun Ma’s impressive academic and research experience, research output, national and international recognition, and interdisciplinary research approach make him an outstanding candidate for the Best Researcher Award. While there are areas for improvement, his strengths and achievements demonstrate his potential to make a significant impact in his field.

Changhong Yang | piezieletric and ferroelectric materials | Best Researcher Award

Posted on by ScienceFather

Prof. Dr. Changhong Yang | piezieletric and ferroelectric materials | Best Researcher Award

Prof. Dr at Shandong Provincial Key Laboratory of Preparation and Measurement of Building Materials University of Jinan, China

🎓 Prof. Dr. Changhong Yang, a renowned materials scientist, specializes in lead-free piezoelectric ceramic materials, devices, and their applications. With over two decades of academic and research experience, they currently serve as a Professor at the University of Jinan. 🏫 Their contributions to electronic ceramics, materials innovation, and education are globally recognized. 🌏

Publication Profile

scopus

Education🎓 

Ph.D. in Material Science, State Key Laboratory of Crystal Materials, Shandong University, 2006. B.S. in Silicate Engineering, Shandong Institute of Light Industry (Qilu University of Technology), 2000. Visiting Scholar, Institute for Superconducting and Electronic Materials, University of Wollongong, Australia, 2012.

Experience👩‍🏫

Lecturer, University of Jinan, 2006-2010. Associate Professor, University of Jinan, 2010-2019.  Professor, University of Jinan, 2020-present.  Academic Roles: Director, Collaborative Innovation Platform; Standing Member, Expert Committee; Youth Editorial Board Member of two prestigious journals.

Awards and Honors🏆

Multiple teaching and research excellence awards at the University of Jinan.  Recognition for contributions to lead-free piezoelectric ceramics research.  Appointed to key roles in China’s electronic materials industry collaboration.  Editorial board member for influential ceramic and dielectric journals.

Research Focus🧪

Lead-free piezoelectric ceramic materials and devices.  Development of sustainable electronic applications.  Advanced dielectric properties and their industrial applications.  Industry-university research collaboration to foster innovation.

Teaching and Curriculum📚

Undergraduate Courses: Inorganic Nonmetallic Materials Technology, Process Design of Inorganic Nonmetallic Materials Factory. Graduate Courses: Computer Application Technology.

Publications 📖

Title: Impact of treated sewage water on early strength development of calcium sulfoaluminate cement paste: A comparative study

Authors: Tchekwagep, J.J.K., Ding, N., Yang, F., … Yang, C., Tchakouté, H.K.

Journal: Results in Engineering

Year: 2024

Volume & Article: 24, 103322

Access Type: Open access

Citations: 0

Title: Adjusting the surface quality of printed components via controlling dispersant content to improve the electrical performance of DLP-printed PZT ceramics and devices

Authors: Zhao, Y., Lin, X., Liu, R., … Yang, C., Huang, S.

Journal: Ceramics International

Year: 2024

Volume & Pages: 50(23), 49165–49175

Citations: 0

Title: Large-strain bismuth titanate sodium-based piezoelectric ceramics with enhanced temperature stability

Authors: Dong, G., Li, Q., Zhao, Y., … Yang, C., Huang, S.

Journal: Journal of Alloys and Compounds

Year: 2024

Volume & Article: 1003, 175554

Citations: 0

Title: Mechanocatalytic Hydrogen Generation in Centrosymmetric Barium Dititanate

Authors: Du, Y., Sun, W., Li, X., … Zhang, S., Cheng, Z.

Journal: Advanced Science

Year: 2024

Volume & Article: 11(38), 2404483

Citations: 0

Title: Flexible Piezoelectric 0–3 PZT@C/PDMS Composite Films for Pressure Sensor and Limb Motion Monitoring

Authors: Li, C., Li, C., Wang, Y., … Huang, S., Yang, C.

Journal: Coatings

Year: 2024

Volume & Article: 14(10), 1269

Access Type: Open access

Citations: 0

Title: Altermagnetism Induced by Sliding Ferroelectricity via Lattice Symmetry-Mediated Magnetoelectric Coupling

Authors: Sun, W., Wang, W., Yang, C., … Huang, S., Cheng, Z.

Journal: Nano Letters

Year: 2024

Volume & Pages: 24(36), 11179–11186

Citations: 1

Title: Flexible all-inorganic BiFeO3-based film with high piezoelectric coefficient for energy harvesting and sensing

Authors: Li, C., Si, J., Yuan, X., … Huang, S., Yang, C.

Journal: Journal of Materials Science: Materials in Electronics

Year: 2024

Volume & Article: 35(26), 1745

Citations: 0

Title: Chinese raw vermiculite: A potential additive for improving the thermal properties of calcium sulfoaluminate cement-blended mortars for applications in hot regions

Authors: Kouadjo Tchekwagep, J.J., Yang, F., Wang, S., … Yang, C., Cheng, X.

Journal: Journal of Building Engineering

Year: 2024

Volume & Article: 92, 109723

Citations: 0

Title: Large piezoelectric property of Bi(Fe 0.93 Mn 0.05Ti0.02)O3 film by constructing internal bias electric field

Authors: Yuan, X., Fan, M., Wang, W., … Huang, S., Yang, C.

Journal: Journal of Advanced Dielectrics

Year: 2024

Volume & Article: 14(4), 2440014

Citations: 0

Title: Capacitive Energy Storage Performance of Poly(ether imide) Composites with TiO2 Particles | 二氧化钛/聚醚酰亚胺复合薄膜及其介电储能性能

Authors: Shi, Q., Yuan, Z., Zhao, Y., … Lin, X., Yang, C.

Journal: Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society

Year: 2024

Volume & Pages: 52(7), 2197–2205

Citations: 0

Conclusion

The candidate is an exceptionally strong contender for the Best Researcher Award in the field of lead-free piezoelectric ceramics. Their extensive expertise, leadership roles, and dedication to innovation and teaching make them a valuable asset to the field. While they can enhance their profile with broader international exposure and stronger commercialization efforts, their accomplishments clearly demonstrate their impact and suitability for this honor.

Ze Yang | self-powered system | Best Researcher Award

Posted on by ScienceFather

Assist Prof Dr. Ze Yang | self-powered system | Best Researcher Award

Assist Prof Dr at Tsinghua University, China

Dr. Ze Yang is a Postdoctoral Research Fellow at Tsinghua University’s Intelligence and Biological Machinery Laboratory, specializing in energy harvesting and mechanical engineering. With a Ph.D. from China University of Geosciences (Beijing), he has developed innovative systems like triboelectric nanogenerators (TENGs) and energy-harvesting backpacks. His work focuses on electrostatic adsorption and charge-pumping methods. Dr. Yang has published extensively in top-tier journals like Nano Energy and ACS Nano, contributing significantly to advancements in nanoenergy. He has earned multiple awards for his research excellence and is fluent in Mandarin and English.

Publication Profile

scholar

Education🎓

Dr. Ze Yang holds a Ph.D. in Mechanical Engineering from China University of Geosciences (Beijing), obtained in 2022. Before that, he earned a Master’s degree in Mechanical Engineering from Beihua University (2018) and a Bachelor’s degree from Hubei University of Art and Science (2016). During his Ph.D., he participated in a joint training program with Tsinghua University, gaining hands-on experience in cutting-edge research on mechanical systems and energy harvesting technologies. Currently, he is a Postdoctoral Research Fellow at Tsinghua University. 📖

Experience⚙️

Dr. Ze Yang’s research journey began with his role as a Graduate Research Assistant at Beihua University, focusing on rehabilitation bed systems. At Tsinghua, he designed advanced TENGs and energy-harvesting systems. His projects include developing load-suspended and charge-pumping backpacks, which use 3D printing and innovative designs to reduce impact and improve energy efficiency. As a Postdoctoral Fellow, he continues his groundbreaking work on non-contact electrostatic induction and wind energy harvesting. He is proficient in mechanical drawing and 3D printing. 🛠️🎯🚀

Awards and Honors 🏆

Dr. Ze Yang has received numerous accolades for his academic and research excellence. These include the prestigious National Scholarship for Excellent Academic Performance (Top 2%) in 2017, First Prize for “Excellent Academic Report” at Tsinghua University in 2021, and the Best Poster Award at the 5th International Conference on Nanoenergy and Nanosystems in 2021. His innovative work on energy-harvesting technologies has also garnered wide recognition within the mechanical engineering field.

Research Focus🌍

Dr. Ze Yang’s research focuses on mechanical engineering, triboelectric nanogenerators (TENGs), and energy harvesting. His groundbreaking work includes developing charge-pumping systems and non-contact electrostatic induction for energy generation from human motion and environmental sources like wind. He also focuses on minimizing material fatigue and improving output efficiency through innovative methods like charge pumping and voltage stabilization. His research has major implications for renewable energy and impact reduction technologies.

 

Publication  Top Notes

Technological Progress and Commercial Applications: Choi et al. (2023) have explored the evolution of TENG technology and its transition from laboratory innovations to commercial applications. Their review in ACS Nano covers breakthroughs in material development, system integration, and potential industrial uses .

Flexible Tactile Sensors: Song et al. (2022) introduced a flexible triboelectric tactile sensor capable of recognizing material and texture simultaneously. This innovation in Nano Energy highlights the sensor’s potential use in robotics and prosthetics .

Energy Harvesting from Wearables: Yang et al. (2021) presented a “power backpack” designed for energy harvesting and reduced load impact. The device utilizes a TENG to generate electricity from human movement, providing a practical energy source for portable electronics .

Charge Pumping and Voltage Stabilization: Research led by Yang et al. (2021) focuses on improving the efficiency of TENGs by incorporating a charge pumping mechanism, stabilizing the voltage, and boosting the current output .

Biosystems and Self-powered Devices: Shen et al. (2022) reviewed the application of TENGs in biosensing and self-powered systems. They emphasize challenges like device miniaturization and material optimization, as well as their use in health monitoring and wearable technologies .

Conclusion

Z. Yang is undoubtedly a strong candidate for the Best Researcher Award, with a proven track record of innovation, excellence in mechanical engineering, and significant contributions to energy harvesting technologies. His strengths in system design, theoretical analysis, and practical applications make him an asset to the field. By expanding his collaborative network and incorporating AI technologies into his research, Yang has the potential to further enhance his contributions and solidify his status as a leading researcher.

Prof Dr Edilso Reguera – Energy Conversion and Storage Materials

Posted on by ScienceFather
Prof  Dr Edilso Reguera: Leading Researcher In Energy Conversion and Storage Materials

Congradulations, Prof  Dr Edilso Reguera, on winning the esteemed  Paper Excellence in Research  Sciencefather!

Congratulations, Prof  Dr Edilso Reguera In recognition of your outstanding contributions to the field of Energy Conversion and Storage Materials, we extend our heartfelt congratulations on receiving the prestigious  Excellence in Research  Award by ScienceFather Your dedication to advancing knowledge in clinical Energy Conversion and Storage Materials, and the exploration of Energy Conversion and Storage Materials is truly commendable.Your commitment to excellence and tireless efforts in research have not only enriched our academic community but have also contributed significantly to the broader scientific community.

May this award serve as a testament to your exceptional skills, unwavering dedication, and the impactful influence you’ve had on your field.  We look forward to witnessing your continued success and the many more groundbreaking contributions to come.Once again, congratulations on this well-deserved achievement!

Professional Profiles:

Education:

1972-1977: B. Sci. Physics: Lic. en Física, Universidad de La Habana, Cuba Título la Tesis: Distribution of carbon in welded unions of carbon steel

1977-1980: Estudios de Posgrado: Crystallography, University of Las Villas, Cuba

1984-1987: Doctorado en Ciencias Químicas, Centro Nacional de Investigaciones Científicas, La Habana, Cuba Título de la Tesis: Phase transformations in pyrite-polymetallic minerals Supervisores: Drs. V. Nikolaev and A. Dago

2009 Dr. in Sc. (Doctorado de 2do nivel)), Universidad de La Habana, Enero 2010 Título de la Tesis: Hexacyano Metallates and Nitroprusside of Transition Metals: Physical Properties

 previous and current positions:

1977-1980: Graduated Instructor for Physics, Central University of Las Villas, Cuba
1980-1992: Assistant Researcher, National Center for Scientific Research, Havana, Cuba
1992-1995: Full Researcher, National Center for Scientific Research, Havana, Cuba; General Vice-Director and Director of the Chemistry Division, National Center for Scientific Research, Havana, Cuba.
1996-2005 Full Researcher, Institute of Materials and Reagents, University of Havana, Cuba Head of the Joint Scientific Council of the Faculty of Physics and Materials Science Institute, Havana University (2000- 2006)
1997-1999: CONACyT Patrimonial Excellence Position, Level II, México
1999-2001: Full Professor, National Polytechnic Institute, CICATA-Unidad Legaria, México
2005- Full Professor, National Polytechnic Institute, CICATA-Unidad Legaria, México
2007- National Researcher Level III (SNI III), Mexico

Publications & Contributions:

1) Tribochemical Synthesis and Reactions of Silver Hexacyanoferrates, José Fernández-Bertrán, José Blanco, Edilso Reguera, Carlos Díaz Aguila and Teresa Abrantes, Proc. V Ibero-American Congress on Inorganic Chemistry, Saltillo City, México, April 1995, 426-429.
2) Synthesis and Characterization of Two Complexes of Lanthanum and Glycine, J. Fernández-Bertrán, E. Reguera, A. Dago and C. López Hernández, Proc. V Ibero-American Congress on Inorganic Chemistry, Saltillo City, México, April 1995, 422-425.
3) Applications of the Mössbauer Spectroscopy to the Study of Iron Coordination Compounds, E. Reguera and J. Fernández, Proc. V Ibero-American Congress on Inorganic Chemistry, Saltillo city, México, April 1995, 505-08.
4) Characterization of Active Principles Derived from Natural Clinoptilolite Modified with Sodium Carbonate, Aramis Rivera, Gerardo Rodríguez, Edilso Reguera, Enelio Torres, Francisco Machado; Proc. Zeolite 97; 5th International Conference on the Occurrence, Properties, and Utilization of Natural Zeolites; Naples, Italy, Sept 21-29, 1997; 255- 257.
5) Characterization of Iron-Exchanged Forms of a Modified Clinoptilolite: A Solid State Multinuclear NMR Study. G. Rodríguez, L.C. de Menorval, E. Reguera, F. Chávez, Proc. Zeolites 02, 6th International Conf. Occurrence, Properties and Utilization of Natural Zeolites, Thessaloniki, Greece, June, 2002, 307-310.

Patentes ;

MXa2016016019 Dispositivo para la generación de películas delgadas por el método de inmersión, en el IMPI
MXa2016017176 Remoción de Arsénico del agua de consumo humano a partir de nanopartículas de hierro, en el IMPI
MXa2016017181 Proceso de Oxidación foto-catalítica de agua en fotosíntesis artificial, con nanoestructuras activas         ante luz solar, en el IMPI
MXE2017089808 Proceso para la obtención de pellets de carbón bituminoso activado para el almacenamiento de gas,     en el IMPI
MX/a/2018/014339 Proceso para el tratamiento post depósito de capas del complejo cobalto-fosfato copi para       aumentar la respuesta electrocatalítica en la oxidación de agua, en IMPI