Surendra Kumar Patel | Surface Composite | Best Researcher Award

Published on 12/09/2025 by Mechanics Awards

Dr. Surendra Kumar Patel | Surface Composite | Best Researcher Award

Shandong University | China

Surendra Kumar Patel is a dedicated researcher and academic with a strong foundation in mechanical engineering and materials science, specializing in the development of advanced surface composites, friction stir processing, and bioactive materials for engineering and biomedical applications. He earned his Bachelor of Technology in Mechanical Engineering from Gautam Buddha Technical University, where he completed a thesis project on the fabrication of a windmill model and the utilization of wind energy, followed by a Master of Technology in Mechanical Engineering with a specialization in metal matrix composites at Maulana Azad National Institute of Technology Bhopal, where his research focused on microstructural analysis and slurry erosion wear behavior of silicon carbide and zircon sand reinforced LM-13 alloy composites, and later achieved a Ph.D. in Mechanical Engineering with specialization in surface composites at the National Institute of Technology Mizoram, where his doctoral thesis dealt with experimental investigations into the microstructural, mechanical, and tribological properties of WC and ZrSiO4 particle reinforced aluminium surface composites fabricated through the friction stir processing route. His professional career began as an Assistant Professor in the Department of Mechanical Engineering at Radharaman Engineering College, Bhopal, where he taught key subjects such as strength of materials, fluid mechanics, materials technology, mechanics of materials, and manufacturing technology, in addition to supervising undergraduate projects and serving as Head of Department for the polytechnic wing. Currently, he is serving as a Postdoctoral Fellow at the School of Materials Science and Engineering, Shandong University, China, under a special funded postdoctoral fellowship program, where his work is supported by multiple prestigious funding agencies including the National Natural Science Foundation of China, Shandong Provincial Science Foundation for Outstanding Young Scholars, and the Key Research and Development Program of Shandong Province. engineering, surface composites, and advanced friction stir processing technologies with both industrial relevance and biomedical potential.

Profile: Google Scholar

Featured Publications:

Singh, V. P., Patel, S. K., Ranjan, A., & Kuriachen, B. (2020). Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: A critical review. Journal of Materials Research and Technology, 9(3), 6217–6256.

Singh, V. P., Patel, S. K., & Kuriachen, B. (2021). Mechanical and microstructural properties evolutions of various alloys welded through cooling assisted friction-stir welding: A review. Intermetallics, 133, 107122.

Patel, S. K., Singh, V. P., Roy, B. S., & Kuriachen, B. (2020). Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review. Materials Science and Engineering: B, 262, 114708.

Singh, V. P., Patel, S. K., Kumar, N., & Kuriachen, B. (2019). Parametric effect on dissimilar friction stir welded steel-magnesium alloys joints: A review. Science and Technology of Welding and Joining, 24(8), 653–684.

Patel, S. K., Kuriachen, B., Kumar, N., & Nateriya, R. (2018). The slurry abrasive wear behaviour and microstructural analysis of A2024-SiC-ZrSiO4 metal matrix composite. Ceramics International, 44(6), 6426–6432.

Patel, S. K., Singh, V. P., Kumar, D., Roy, B. S., & Kuriachen, B. (2022). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC nanoparticle through friction stir processing. Materials Science and Engineering: B, 276, 115476.

Patel, S. K., Singh, V. P., & Kuriachen, B. (2019). Friction stir processing of alloys with secondary phase particles: An overview. Materials and Manufacturing Processes, 34(13), 1429–1457.

Patel, S., Shah, M., Patel, J., & Kumar, N. (2009). Iron deficiency anemia in moderate to severely anaemia patients. Gujarat Medical Journal, 64(2), 15–17.

Yadav, P. K., Dixit, G., Dixit, S., Singh, V. P., Patel, S. K., Purohit, R., & Kuriachen, B. (2021). Effect of eutectic silicon and silicon carbide particles on high stress scratching wear of aluminium composite for various testing parameters. Wear, 482, 203921.

Patel, S. K., Singh, V. P., Roy, B. S., & Kuriachen, B. (in press). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC and ZrSiO4 nanoparticle through friction stir processing. Materials Science and Engineering: B.

Assoc. Prof. Dr Besey Ören | Structural Health Monitoring | Best Researcher Award

Published on 28/05/202528/05/2025 by Mechanics Awards

Assoc. Prof. Dr Besey Ören | Structural Health Monitoring | Best Researcher Award

Istanbul, University of health Science, Turkey

Assoc. Prof. Dr. Besey Ören is a distinguished academic and healthcare professional with a strong background in internal medicine nursing, intensive care nursing, emergency nursing, nephrology nursing, and cardiology nursing. With over three decades of experience, Ören has established herself as a leader in her field, serving as a faculty member, department head, and editor. Her dedication to nursing education and research has earned her numerous awards and honors, including the title of Associate Professor in Internal Medicine Nursing.

Profile

scopus

🎓 Education

Ören graduated with honors from Florence Nightingale School of Nursing in 1990. She completed her master’s degree in 1997 and her doctorate in 2010. Ören received the title of Assistant Professor in 2014 and Associate Professor in 2021. Her educational background has provided a solid foundation in nursing principles and prepared her for a career in research and education. Ören has also participated in various certificate programs, including Intensive Care Nursing courses in the USA.

👨‍🔬 Experience

Ören has accumulated extensive experience in nursing education, research, and practice. She has worked as a nurse, head nurse, faculty member, and department head at various institutions, including Istanbul University and Health Sciences University. Ören has served as the President of the Turkish Intensive Care Nurses Association and has been involved in numerous professional associations. Her experience has equipped her with a deep understanding of nursing principles and practices.

🔍 Research Interest

Ören’s research focus lies in internal medicine nursing, intensive care nursing, emergency nursing, nephrology nursing, and cardiology nursing. She has published numerous papers and book chapters on these topics and has presented at international and national conferences. Ören’s research aims to improve nursing practices and patient outcomes.

Awards and Honors 🏆

Ören has received numerous awards and honors for her contributions to nursing education and research. She has been recognized for her expertise in intensive care nursing and has served as an editor and scientific board member for various journals. Ören has also received scholarships for her research and has been involved in various projects and grants.

📚 Publications

“Investigation of the Effect of Sleep Hygiene Training on Obstructive Sleep Apnea Symptoms, Fatigue, and Sleep Quality In Patients With Atrial Fibrillation”

Conclusion

Assoc. Prof. Dr. Besey Ören’s extensive experience, leadership roles, research productivity, editorial and scientific contributions, and professional service make her a strong candidate for the Best Researcher Award. While there are areas for improvement, Ören’s achievements and contributions to nursing education and research demonstrate her qualifications for this award.

Hasi Rani Barai | Nanocomposite materials | Best Researcher Award

Published on 24/09/202424/09/2024 by Mechanics Awards

Assist Prof Dr. Hasi Rani Barai | Nanocomposite materials | Best Researcher Award

Assistant Professor at Yeungnam University, South Korea

Dr. Hasi Rani Barai is an accomplished Assistant Professor at Yeungnam University, Republic of Korea, specializing in materials science and nanotechnology. She completed her postdoctoral research in artificial photosynthesis at Sogang University and nanomaterials at Ewha Womans University. Dr. Barai has earned global recognition for her innovative work in energy storage devices and nanocomposite materials. She holds a Ph.D. from Inha University and has published extensively in high-impact journals. Her career is marked by a deep commitment to advancing materials engineering and green energy solutions.

Publication Profile

orcid

Education 🎓

Ph.D. (2010–2013): Inha University, South Korea, under Prof. H.W. Lee – Research in physical organic mechanisms, nanomaterials, and high-energy materials. M.S. (2006–2008): University of Dhaka, Bangladesh, under Prof. M. Muhibur Rahman – Specialized in laser spectroscopy and physical chemistry. B.Sc. (2000–2006): University of Dhaka, Bangladesh, under Prof. M. Muhibur Rahman – Studied chemistry with a focus on nanomaterials and spectroscopy.

Experience 🔬

Assistant Professor (2015–present): Yeungnam University, South Korea – Leading research in nanocomposites, energy storage, and biosensors Postdoctoral Fellow (2013–2015): Sogang University, South Korea – Focused on artificial photosynthesis and nanocatalysts for CO2 reduction. Postdoctoral Fellow (2013): Ewha Womans University, South Korea – Researched nanoparticles for energy storage. Research Fellow: Expert in supercapacitors, electrochemistry, and MOFs.

Awards and Honors 🏅

KCAP Fellowship: Awarded for outstanding research in artificial photosynthesis and nanomaterials at Sogang University. Best Paper Award: Recognition for top-tier research publications in energy storage systems. International Research Grants: Secured multiple research grants to advance the field of nanotechnology and green energy. Young Scientist Award: Honored for innovative contributions in the field of materials science and energy devices.

Research Focus 🔍

Materials Science & Engineering: Specializes in nanocomposites, supercapacitors, and biosensors. Electrochemistry & Energy Storage: Focus on supercapacitors, nanoparticles, and energy storage devices for sustainable technologies. Nanotechnology & Catalysis: Research in nanocatalysts, MOFs, and CO2 reduction for artificial photosynthesis. Green Energy: Leading innovations in renewable energy solutions using nanomaterials and advanced electrochemistry.

Publication Top Notes

High-Performance Battery-Type Supercapacitors: Investigated the growth of nanorods/nanospheres on conductive frameworks for energy storage. ACS Applied Materials & Interfaces, July 2024. DOI: 10.1021/acsami.4c03109

Detection of Polymorphisms in FASN, DGAT1, and PPARGC1A Genes: Analyzed gene associations with milk yield and composition traits in river buffalo. Animals, June 2024. DOI: 10.3390/ani14131945

Conductive Gels for Energy Storage and Conversion: Studied design strategies for materials used in energy applications. Materials, May 2024. DOI: 10.3390/ma17102268

Antibiotic Resistance in Plant Pathogenic Bacteria: Discussed environmental impacts and biocontrol agents. Plants, April 2024. DOI: 10.3390/plants13081135

pH-Sensitive Hydrogel Membrane for Dye Water Purification: Developed sodium alginate/poly(vinyl alcohol) hydrogel for environmental applications. ACS ES&T Water, February 2024. DOI: 10.1021/acsestwater.3c00567

Conclusion

Dr. Hasi Rani Barai is highly suitable for the Best Researcher Award due to her remarkable achievements in the fields of nanocomposite materials, energy storage, and artificial photosynthesis. Her extensive academic and research career reflects excellence in innovative materials science, positioning her as a leading researcher in cutting-edge technologies that address global challenges. By fostering international collaborations and emphasizing applied research, Dr. Barai’s already stellar portfolio could reach even greater heights, making her a deserving candidate for this award.

Juan Bai | Materials and Structures | Women Researcher Award

Published on 02/09/202402/09/2024 by Mechanics Awards

Dr. Juan Bai | Materials and Structures | Women Researcher Award

Dr. Queensland university of technology, Australia

Dr. Bai J. is an ARC DECRA Fellow and Lecturer at Queensland University of Technology, with a strong background in material physics and chemistry. Their research is centered on designing and synthesizing functional nanostructured materials for electrochemistry and energy conversion, particularly in fuel cells and electrocatalysis. Dr. Bai has published 24 papers in leading SCI journals such as Advanced Materials and ACS Energy Letters. Recognized for their contributions, they have received prestigious awards, including the Australian Research Council DECRA and Discovery Projects awards. Dr. Bai holds a Ph.D. from Shaanxi Normal University and has extensive expertise in electrochemical energy storage and conversion devices.

Professional Profiles:

Google scholar

🎓 Education

Feb. 2024 – Present:
ARC DECRA Fellow/Lecturer, School of Chemistry and Physics, Queensland University of Technology, Brisbane, Australia.Apr. 2020 – Jan. 2024:
Postdoc in Electrocatalysis, School of Chemistry and Physics, Queensland University of Technology, Brisbane, Australia.
Supervisors: Prof. Ziqi Sun, Jun MeiSep. 2016 – Jun. 2019:
Ph.D. in Material Physics and Chemistry, School of Materials Science and Engineering, Shaanxi Normal University, Xi’an, China.
Supervisors: Prof. Yu Chen, Jinghui ZengSep. 2012 – Jun. 2015:
M.S. in Physical Chemistry, College of Chemistry and Materials Science, Nanjing Normal University, Nanjing, China.
Supervisors: Prof. Dongmei Sun, Yu Chen, Tianhong LuSep. 2008 – Jun. 2012:
B.S. in Science Education, Department of Applied Chemistry, Yuncheng University, Yuncheng, China.

🔬 Research Objectives

My research is centered on the design and synthesis of functional nanostructured materials for applications in electrochemistry and energy conversion devices. Key areas of focus include:Anodic and Cathodic Reactions of Fuel Cells: ORR, MOR, EOR, and FAORElectrocatalysts: Noble metal-based (Pt, Pd, Rh) nanoparticles for HER, OER, and NRRAs the first/co-first/corresponding author, I have published 24 papers in top-tier SCI Journals such as Advanced Materials, ACS Energy Letters, and Advanced Energy Materials.

🏆 Awards and Honors

2023: Australian Research Council Discovery Early Career Researcher Award (DECRA) – $448,407.002023: Australian Research Council Discovery Projects – $404,530.002018: National Scholarship for Graduate Students (Ph.D.)2017: Research Individual Award by Shaanxi Normal University2017: Ji-Xue Scholarship by Shaanxi Normal University2016: Yuan-Ding Scholarship by Shaanxi Normal University2015: Excellent Student Award by Nanjing Normal University

Strengths for the Award

Extensive Research Experience: The candidate has a strong background in material physics and chemistry, with a focus on nanostructured materials and their applications in electrochemical energy conversion. This expertise is highly relevant to the award, as it demonstrates a deep understanding of a critical field in modern science.
Publication Record: With 24 papers published in high-impact SCI journals such as Advanced Materials, ACS Energy Letters, and Advanced Energy Materials, the candidate has established herself as a leading researcher in her field. This prolific publication record underscores her ability to contribute original and significant research to the scientific community.
Award and Recognition: The candidate has received prestigious awards, including the 2023 Australian Research Council Discovery Early Career Researcher Award (DECRA) and substantial research funding. These accolades reflect her recognized potential and achievements within the scientific community.
Research Focus on Sustainability: The candidate’s work on electrocatalysts and fuel cells, especially in the context of sustainable energy, aligns with global priorities in renewable energy and environmental protection. This makes her research not only innovative but also socially and environmentally impactful.
Professional Skills: The candidate has demonstrated a high level of expertise in experimental techniques, theoretical knowledge, and the use of advanced instrumentation. These skills are essential for conducting cutting-edge research in electrochemistry and material science.

Areas for Improvement

Broader Impact and Outreach: While the candidate has an impressive academic and research background, there is limited information on her involvement in outreach activities, mentoring, or promoting women in science. Increasing visibility and engagement in these areas could enhance her candidacy for a Women Researcher Award, which often considers contributions beyond academic achievements.
Interdisciplinary Collaboration: While the candidate’s research is highly specialized, further collaboration across disciplines could lead to broader applications of her work and increase its overall impact. Engaging in interdisciplinary projects or collaborations with industry could further elevate her profile.

✍️Publications Top Note :

Nanocatalysts for Electrocatalytic Oxidation of Ethanol
Authors: J. Bai, D. Liu, J. Yang, Y. Chen
Journal: ChemSusChem, 12(10), 2117-2132, 2019
Citations: 170
🧪 Focus: Ethanol oxidation using nanocatalysts.

Polyallylamine-Functionalized Platinum Tripods: Enhancement of Hydrogen Evolution Reaction by Proton Carriers
Authors: G.R. Xu, J. Bai, L. Yao, Q. Xue, J.X. Jiang, J.H. Zeng, Y. Chen, J.M. Lee
Journal: ACS Catalysis, 7(1), 452-458, 2017
Citations: 147
🔋 Focus: Hydrogen evolution reaction.

Bimetallic Platinum–Rhodium Alloy Nanodendrites as Highly Active Electrocatalyst for the Ethanol Oxidation Reaction
Authors: J. Bai, X. Xiao, Y.Y. Xue, J.X. Jiang, J.H. Zeng, X.F. Li, Y. Chen
Journal: ACS Applied Materials & Interfaces, 10(23), 19755-19763, 2018
Citations: 145
⚗️ Focus: Platinum-rhodium alloy for ethanol oxidation.

Atomically Ultrathin RhCo Alloy Nanosheet Aggregates for Efficient Water Electrolysis in Broad pH Range
Authors: Y. Zhao, J. Bai, X.R. Wu, P. Chen, P.J. Jin, H.C. Yao, Y. Chen
Journal: Journal of Materials Chemistry A, 7(27), 16437-16446, 2019
Citations: 143
🌊 Focus: Water electrolysis using RhCo alloy nanosheets.

Au Nanowires@Pd-Polyethylenimine Nanohybrids as Highly Active and Methanol-Tolerant Electrocatalysts Toward Oxygen Reduction Reaction in Alkaline Media
Authors: Q. Xue, J. Bai, C. Han, P. Chen, J.X. Jiang, Y. Chen
Journal: ACS Catalysis, 8(12), 11287-11295, 2018
Citations: 133
🧪 Focus: Oxygen reduction reaction in alkaline media.

Polyethyleneimine Functionalized Platinum Superstructures: Enhancing Hydrogen Evolution Performance by Morphological and Interfacial Control
Authors: G.R. Xu, J. Bai, J.X. Jiang, J.M. Lee, Y. Chen
Journal: Chemical Science, 8(12), 8411-8418, 2017
Citations: 115
⚛️ Focus: Hydrogen evolution through platinum superstructures.

Hydrothermal Synthesis and Catalytic Application of Ultrathin Rhodium Nanosheet Nanoassemblies
Authors: J. Bai, G.R. Xu, S.H. Xing, J.H. Zeng, J.X. Jiang, Y. Chen
Journal: ACS Applied Materials & Interfaces, 8(49), 33635-33641, 2016
Citations: 96
🔬 Focus: Rhodium nanosheet for catalytic applications.

Molybdenum‐Promoted Surface Reconstruction in Polymorphic Cobalt for Initiating Rapid Oxygen Evolution
Authors: J. Bai, J. Mei, T. Liao, Q. Sun, Z.G. Chen, Z. Sun
Journal: Advanced Energy Materials, 12(5), 2103247, 2022
Citations: 87
⚡ Focus: Oxygen evolution in cobalt.

One-Pot Fabrication of Hollow and Porous Pd–Cu Alloy Nanospheres and Their Remarkably Improved Catalytic Performance for Hexavalent Chromium Reduction
Authors: S.H. Han, J. Bai, H.M. Liu, J.H. Zeng, J.X. Jiang, Y. Chen, J.M. Lee
Journal: ACS Applied Materials & Interfaces, 8(45), 30948-30955, 2016
Citations: 85
🌍 Focus: Catalytic reduction of hexavalent chromium.

Glycerol Oxidation Assisted Electrocatalytic Nitrogen Reduction: Ammonia and Glyceraldehyde Co-Production on Bimetallic RhCu Ultrathin Nanoflake Nanoaggregates
Authors: J. Bai, H. Huang, F.M. Li, Y. Zhao, P. Chen, P.J. Jin, S.N. Li, H.C. Yao, J.H. Zeng
Journal: Journal of Materials Chemistry A, 7(37), 21149-21156, 2019
Citations: 84

Conclusion

The candidate is exceptionally well-suited for the Women Researcher Award, given her extensive research experience, strong publication record, and recognized achievements in the field of electrochemistry and materials science. Her work is not only innovative but also highly relevant to global challenges, particularly in sustainable energy. To further strengthen her candidacy, the candidate might consider expanding her impact through outreach, mentoring, and interdisciplinary collaboration.

Tao Wang | Geopolymer materials | Best Researcher Award

Published on 24/08/202427/08/2024 by Mechanics Awards

Mr. Tao Wang | Geopolymer materials | Best Researcher Award

Mr. Nanjing Hydraulic Research Institute, China

The research presents a method for developing high-strength, low-carbon geopolymer mortar using fly ash and slag under ambient curing conditions. It addresses the challenge of low strength in fly ash-based geopolymers by analyzing the impact of slag content on mechanical properties. The study also investigates the correlation between microstructural and macroscopic properties using grey relational analysis and assesses the environmental and economic benefits of varying slag content. This work offers practical guidance for advancing sustainable, high-performance geopolymer materials, supported by the National Natural Science Foundation of China.

Professional Profiles:

scopus

🏗️ About Our Research

🔍 Our study introduces an innovative method to develop high-strength geopolymer mortar that boasts low-carbon and environmentally friendly characteristics under ambient curing conditions. The research delves into the mechanical properties, microstructural attributes, and environmental benefits of this mortar. 🌍

🚧 Tackling the Strength Challenge

💡 Fly ash-based geopolymer mortar is celebrated for its eco-friendly benefits, but achieving high strength remains a challenge in modern structural engineering. While most studies focus on high-temperature curing, our research uniquely explores the influence of slag content on the mechanical properties of geopolymer mortar under ambient conditions.

🔬 Deep Dive: Microstructural and Mechanical Properties

📊 We conducted a thorough analysis of the microstructural performance and established a framework using the grey relational analysis method to correlate these findings with the mortar’s macroscopic mechanical properties. Additionally, we evaluated the environmental and economic impacts of varying slag content through statistical analysis.

🌱 Towards a Sustainable Future

🌱 This work provides valuable insights and practical guidance for the advancement of low-carbon, environmentally friendly, and high-performance geopolymer mortar, paving the way for future developments in sustainable construction materials.

🔗 Research Support

🏆 This research was generously supported by the National Natural Science Foundation of China (SN: 52171270, 51879168) and the Key Funded Projects of the National Natural Science Foundation of China-Regional Innovation and Development Joint Fund (U23A20672). We confirm that this work has not been submitted elsewhere for publication, and all authors have approved the enclosed manuscript.

Strengths for the Award

Innovative Approach: The research introduces a novel method for developing high-strength geopolymer mortar under ambient curing conditions, addressing a crucial challenge in the field. The emphasis on low-carbon and environmentally friendly characteristics is timely and aligns with global sustainability goals.
Comprehensive Analysis: The study offers a thorough investigation of both the mechanical properties and microstructural performance of the geopolymer mortar. The use of grey relational analysis to establish correlations between microstructural and mechanical properties adds depth to the research.
Environmental and Economic Assessment: The inclusion of environmental and economic impact assessments demonstrates a holistic approach, considering not just the technical performance but also the broader implications of the material.
Support from National Foundations: The research is backed by prestigious funding sources, such as the National Natural Science Foundation of China, which underscores the importance and credibility of the work.

Areas for Improvement

Expansion of Application Scenarios: While the research focuses on ambient curing conditions, exploring the applicability of the developed mortar in different environmental conditions or comparing it with other curing methods could provide more comprehensive insights.
Long-term Performance Evaluation: The study could benefit from a long-term performance analysis, including durability and sustainability over extended periods, to further validate the practical application of the geopolymer mortar.
Broader Comparative Analysis: Including a broader range of comparisons with other high-strength construction materials could strengthen the argument for the practical adoption of geopolymer mortar in various structural engineering scenarios.

✍️Publications Top Note :

Development of High-strength Geopolymer Mortar Based on Fly Ash-slag: Correlational Analysis of Microstructural and Mechanical Properties and Environmental Assessment”

Authors: Wang, T., Fan, X., Gao, C.

Journal: Construction and Building Materials (2024), 441, 137515

“Performance of Geopolymer Paste under Different NaOH Solution Concentrations”

Authors: Wang, T., Fan, X., Gao, C., Qu, C.

Journal: Magazine of Concrete Research (2024)

“Shear Behavior and Strength Prediction of HFRP Reinforced Concrete Beams without Stirrups”

Authors: Gu, Z., Hu, Y., Gao, D., Wang, T., Yang, L.

Journal: Engineering Structures (2023), 297, 117030

“Effect of Different Loading Rates on the Fracture Behavior of FRP-Reinforced Concrete”

Authors: Liu, J., Fan, X., Wang, T., Qu, C.

Journal: Fatigue and Fracture of Engineering Materials and Structures (2023), 46(12), pp. 4743–4759

“The Influence of Fiber on the Mechanical Properties of Geopolymer Concrete: A Review”

Authors: Wang, T., Fan, X., Gao, C., Liu, J., Yu, G.

Journal: Polymers (2023), 15(4), 827

“Database-based Error Analysis of Calculation Methods for Shear Capacity of FRP-Reinforced Concrete Beams without Web Reinforcement”

Authors: Wang, T., Fan, X., Gao, C., Qu, C., Liu, J.

Journal: Journal of Southeast University (English Edition) (2023), 39(3), pp. 301–313

“Size Effect Theory on Shear Strength of RC Cantilever Beams without Stirrups”

Authors: Jin, L., Wang, T., Du, X.-L.

Journal: Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics (2020), 37(4), pp. 396–404

“Size Effect Theory on Shear Failure of RC Cantilever Beams”

Authors: Jin, L., Wang, T., Du, X.-L., Xia, H.

Journal: Gongcheng Lixue/Engineering Mechanics (2020), 37(1), pp. 53–62

“Size Effect in Shear Failure of RC Beams with Stirrups: Simulation and Formulation”

Authors: Jin, L., Wang, T., Jiang, X.-A., Du, X.

Journal: Engineering Structures (2019), 199, 109573

Conclusion

Tao Wang’s research on high-strength geopolymer mortar is innovative and impactful, addressing key challenges in the construction industry related to sustainability and strength. The study’s comprehensive analysis and consideration of environmental impacts make it a strong contender for the “Best Researcher Award.” However, expanding the research scope to include more comparative and long-term analyses could further enhance its significance.

Mr. Jeremy Jeba amuel J | Composite materials | Best Researcher Award

Published on 13/06/202413/06/2024 by Mechanics Awards

Mr. Jeremy Jeba amuel J | Composite materials
| Best Researcher Award

Mr. Jeremy Jeba amuel J , Francis Xavier Engineering College, India

Mr. Jeremy Jeba amuel J is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

Professional Profiles:

Google scholar

Orcid

🌟 Objective:

To seek a challenging and responsible position in an emerging organization with a competitive environment, leading the organization to excellence through high efficiency and innovative skills. Aim to provide the best quality and innovation in my work.

🎓 Educational

DegreeYear of PassingPercentageInstitution Name
Ph.D (Pursuing)–Easwari Engineering College
M.E (Engineering Design)201571.1%Easwari Engineering College
B.E (Mechanical Engineering)201366.66%Dr. Sivanthi Adithanar College of Engineering
T.N.H.S.C200969%Margoschis Hr. Sec. School
SSLC200779%Margoschis Hr. Sec. S

Work Experience:

Institution NameFromToTotal Experience
Francis Xavier Engineering College, Tirunelveli24/06/2015Till Date6 years 8 months

Skill-set:

Languages: C, C++
Operating Systems: Windows 10
Packages: MS-Office, Origin
Tools: AutoCAD, Pro-E (Creo), CATIA, Ansys, Fluid sim, CNC Programmin

Industrial Exposure:

Undergone In-plant training at DCW Ltd and Sterlite Copper for two weeks.
Undergone In-plant training at TVS Motor Company for three days.
Visited various industries like Hyundai – Chennai, Doosan Power Systems, Aqua-Sub, Madras Radiators Pvt Ltd, and interacted with HRs regarding placement.

Technical Training:

Participated in numerous Faculty Training Programmes organized by various reputed institutions.
Attended seminars, webinars, and workshops from different institutions.

Achievements:

Secured First place in state-level project presentation competition conducted by Velammal College of Engineering & Technology, Madurai.
Secured Second place in national-level CAD Modelling conducted by Holycross Engineering College, Vagaikulam.
Secured Second place in national-level paper presentation competition conducted by SRM University – Ramapuram, Chennai.
Secured awards from the institution for achieving 100% results.
Coordinated a 1-week FDP sponsored by Anna University from 3rd Jan to 8th Jan 2022 under the title ME 8493 – Thermal Engineering 1.

📖 Publications Top Note :

Studies on Mechanical Properties and Characterization of Carbon Fiber Reinforced Hybrid Composite for Aerospace Application

Authors: J.J.J. Samuel, R. Ramadoss, K.N. Gunasekaran, K. Logesh, S.J.P. Gnanaraj, …

Journal: Materials Today: Proceedings

Volume: 47, pp. 4438-4443

Year: 2021

Citations: 27

An Experimental Study of the Properties of Carbon Fiber/Epoxy Composites Mixed with Rubber Granules

Authors: J.J.S. Joseph Jebaraj, R. Rajendran

Journal: International Journal of Polymer Science

Volume: 2024 (1), Article ID 5555592

Year: 2024

Green Methods of Larvae Control in Aquatic Environments: Using Solar Energy to Agitate Water

Authors: D.E. Paulsyah, S.J.P. Gnanaraj, R.S. Myrtle, C.J.C. Grace, J.J.J. Samuel

Conference: 2023 International Conference on Sustainable Communication Networks and …

Year: 2023

Vacuum Bag Technology for Obtaining Carbon/Epoxy Composites

Authors: M.J.J.S.J. Ajith Arumugam A, Karthikeyan S, Godlin S.R., Giftson Gnanaraj J

Journal: International Journal of Innovative Research in Science, Engineering and …

Year: 2021

Experimental Investigation on Fabrication Methods of Glass Fibre with Rubber Powder for Radome Applications

Authors: J.J.S.J. Esakki Raja, Anand K, Elson Pushpa M, Ganeshamanikandan C

Journal: Journal of Xidian University

Volume: 14 (Issue 5, 2020), pp. 894-900

Year: 2020

Fracture Analysis of Compact Tension Specimen

Authors: M.J.J.S. Mr. S. Sheik Sulaiman, Mr. K. Krishna Moorthy

Journal: International Journal of Research in Advanced Technology – IJORAT

Volume: 1 (9), pp. 49-55

Year: 2016

Performance Study on Hybrid Glass Fiber Epoxy Composite

Authors: M.J. Lakshmipathy, J. Jereme Jeba Samuel

Journal: International Journal of Research in Advanced Technology – IJORAT

Volume: 1 (1), pp. 18-22

Year: 2016

Study of Mechanical Properties and Characterization of Hybrid Polymer Matrix Composites Based on Water Absorption

Authors: S.S.P.J. Jeremy Jeba Samuel, Lakshmipathy

Journal: International Journal of Research in Advanced Technology – IJORAT

Volume: 1 (1), pp. 36-40

Year: 2016

Mechanical Properties and Characterization Studies in Natural Fiber/Lignite Fly Ash Reinforced Hybrid Composites

Authors: S.K. G.K., K.G. Ashok

Journal: Journal of Manufacturing Engineering

Volume: 10 (3), pp. 157-160

Year: 2015

An End for Cancer by Nanotechnology

Authors: (Details not provided)

Assoc Prof Dr. Oğuzhan Demir | Solid Mechanics Award | Best Researcher Award

Published on 20/03/202420/03/2024 by Mechanics Awards

Assoc Prof Dr. Oğuzhan Demir | Solid Mechanics Award | Best Researcher Award

Assoc Prof Dr. Oğuzhan Demir, Bilecik Şeyh Edebali University, Turkey

Assoc Prof Dr. Oğuzhan Demir is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

Professional Profiles:

Scopus

Orcid

Google scholar

🎓 Education

Bachelor: Mechanical Engineering, Selçuk University, 2009Master: Mechanical and Manufacturing Engineering, Bilecik Şeyh Edebali University, 2012Doctorate: Mechanical Engineering, Sakarya University, 2016

🏢 Affiliation

Department/Division: Mechanical EngineeringUniversity/Institute: Bilecik Şeyh Edebali UniversityCity: BilecikCountry: Turkey

👨‍🏫 Academic Titles

Research Assistant: Mechanical Engineering, Bilecik Şeyh Edebali University, 2010-2016Assistant Professor: Mechanical Engineering, Bilecik Şeyh Edebali University, 2017-2022Associate Professor: Mechanical Engineering, Bilecik Şeyh Edebali University, 2022-Current