G Flora | Environmental studies | Excellence in Research

Posted on by ScienceFather

Assist. Prof. Dr G Flora | Environmental studies | Excellence in Research

Assistant Professor at St. Mary’s College (Autonomous), Thoothukudi , India

🌟 A dedicated researcher and academician, the individual has made significant contributions to environmental sustainability, biotechnology, and materials science. With expertise in biodegradation, nanotechnology, and plant sciences, they have presented and participated in numerous national and international conferences, workshops, and training programs. Their research focus includes innovative solutions for environmental hazards and sustainable development, bridging the gap between academia and industry.

Publication Profile

scopus

orcid

Education🎓

Ph.D. in Material Science (2006) from the State Key Laboratory of Crystal Materials, Shandong University. B.S. in Silicate Engineering (2000) from Shandong Institute of Light Industry. Visiting Scholar (2012) at the Institute for Superconducting and Electronic Materials, University of Wollongong, Australia.  Enriched with professional training and workshops on biotechnology, marine flora, and open educational resources.

Experience👩‍🏫

Professor at University of Jinan (2020-Present) specializing in inorganic nonmetallic materials. Associate Professor (2010-2019) and Lecturer (2006-2010) at the same institution. Editorial roles with Bulletin of Chinese Ceramics Society and Journal of Advanced Dielectrics. Presented and participated in over 20 seminars and conferences on sustainability, nanotechnology, and plant science.

Awards and Honors🏆

Director of China Electronic Materials Innovation Platform, showcasing leadership in academia-industry collaboration. Standing Member of the Electronic Ceramics Expert Committee of Shandong Silicate Society.  Editorial Board Member of prestigious journals in ceramics and dielectrics  Recognized speaker and presenter at international forums for research excellence.

Research Focus🔬 

Developing lead-free piezoelectric materials for eco-friendly applications.  Biodegradation of hazardous materials using fungi and bacteria.  Sustainable solutions for textile dye waste and plastic contamination.  Synthesis and characterization of nanoparticles for antibacterial and environmental applications.  Bridging interdisciplinary research in biotechnology, material science, and environmental sustainability.

Publications 📖

Microalgae for Sustainable Biofuel Generation: Innovations, Bottlenecks, and Future Directions (2025)
This article discusses the latest innovations in using microalgae for biofuel production. It covers the technological advancements, the challenges faced in scalability and commercialization, and the future potential of algae-based biofuels in sustainable energy production.

Advances in Botryococcus for Biofuels and Bioproducts (2024)
This review highlights the potential of the alga Botryococcus for producing eco-friendly biofuels and high-value bioproducts. The paper addresses the biochemical pathways, the environmental benefits, and the challenges of cultivating Botryococcus for large-scale biofuel production.

Biochemical Engineering for Elemental Sulfur from Flue Gases (2024)
A review on the engineering strategies to convert sulfur compounds from industrial emissions into elemental sulfur using multi-enzymatic processes, which could reduce environmental pollution and contribute to sustainability.

Remediation of Emerging Pollutants in Water (2024)
This article explores the emerging environmental pollutants affecting water systems, and discusses various remediation techniques aimed at ensuring water sustainability and mitigating the impacts of these pollutants.

Comprehensive Review on Biofuels as Alternatives to Fossil Fuels (2023)
A detailed review of biofuels as a promising alternative to fossil fuels, examining the different types of biofuels, production methods, and the environmental and economic benefits of shifting towards biofuel energy sources.

 

Conclusion

The researcher exhibits solid strengths in presenting cutting-edge research on environmental sustainability, biodegradation, and related issues. Their consistent involvement in national and international academic forums demonstrates their commitment to excellence in research. To further enhance their profile, collaboration in multi-disciplinary projects and increased publication in renowned journals would be beneficial. With these improvements, the researcher would be well-positioned for continued recognition in the scientific community, making them a strong candidate for the “Excellence in Research” award.

Qingqing Hou | Ecology | Best Researcher Award

Posted on by ScienceFather

Dr. Qingqing Hou | Ecology | Best Researcher Award

postdoctor at Lanzhou University , China

A dedicated researcher specializing in ecology, currently serving as a postdoctoral researcher at Lanzhou University since March 2023. 💡 Committed to understanding plant-soil interactions and desertification restoration processes. 🌍 Passionate about contributing to environmental conservation and ecological balance.

Publication Profile

scopus

Education📚 

PhD in Ecology, Lanzhou University, 2016-2022. 🎓 Bachelor’s degree in Ecology, Lanzhou University, 2012-2016. 🌱 Focused on ecosystem restoration and environmental processes during both academic degrees, building a strong foundation in ecological research.

Experience💼 

Postdoctoral researcher at Lanzhou University, 2023-Present. 🌿 Host of Gansu Provincial Basic Research Office on-site postdoctoral project (2023-2025) researching desertification ecosystem restoration. 🔬 Skilled in ecological data collection, analysis, and modeling.

Awards & Honors🏅

Host of the Gansu Provincial Basic Research Office postdoctoral project (23JRRA1157). 💎 Recognized for contributions to desertification restoration research and plant-soil microbial community studies. 🌟 Awarded the 60,000 yuan research funding for ongoing research.

Research Focus🔬 

Focused on plant and soil microbial community interactions during desertification ecosystem restoration. 🌱 Investigates the succession processes of ecological systems. 🌍 Contributes to sustainable environmental practices for ecosystem restoration and climate resilience.

Other Scientific Research Projects🌿 

Gansu Provincial Basic Research Office, on-site postdoctoral project (2023-2025) on desertification restoration (23JRRA1157). 💰 Research funding: 60,000 yuan. 📅 Ongoing from July 2023.

Representative Research Results & Academic Awards🏆 

Representative achievements in plant and soil community restoration during desertification ecosystem recovery. 🌱 Publication in major ecology journals. 🌍 Honored for significant contributions to ecological science and sustainable ecosystem research.

Publications 📖

Interannual Variations in Grassland Carbon Fluxes
Authors: Hou, Q., Ma, K., Yu, X.
Journal: Science of the Total Environment, 2024
Summary: The study explores variations in carbon fluxes across grasslands in the Qilian Mountains, identifying key factors influencing these fluctuations.

Inorganic Carbon Pools and Their Drivers in Grassland and Desert Soils
Authors: Dong, L., Ran, J., Luo, J., Kuzyakov, Y., Deng, J.
Journal: Global Change Biology, 2024
Summary: This research looks into the drivers of inorganic carbon pools in grassland and desert soils, providing insights into carbon storage mechanisms in arid ecosystems.

Short-term Effects of Restoration Measures on Vegetation and Soil Characteristics
Authors: Chen, Y., Xu, J., Xu, C., Yang, C., Yu, X.
Journal: Global Ecology and Conservation, 2024
Summary: The paper examines how different restoration measures impact vegetation communities and soil properties in degraded alpine grasslands.

Screening and Evaluation of Chenopodiaceae Plants for Saline-Alkali Land Improvement
Authors: Xu, N., Yu, X., Di, D., Luo, X., Ma, K.
Journal: Chinese Journal of Grassland, 2024
Summary: This article focuses on selecting suitable Chenopodiaceae plants for improving saline-alkali land in Central Gansu Province.

Response of Soil Microbial α-Diversity to Grazing in Grassland Ecosystems
Authors: Yang, H., Song, J., Hou, Q., Yu, X.
Journal: Land Degradation and Development, 2024
Summary: A meta-analysis that reviews the effect of grazing on soil microbial diversity in various grassland ecosystems.

Active Restoration Efforts Drive Community Succession and Assembly in a Desert
Authors: Hou, Q., Hu, W., Sun, Y., Ran, J., Deng, J.
Journal: Ecological Applications, 2024
Summary: This study investigates how active restoration efforts over the past 53 years have shaped plant and community succession in desert environments.

Distribution, Species Richness, and Relative Importance of Different Plant Life Forms across Drylands in China
Authors: Yao, S., Hu, W., Ji, M., Niklas, K.J., Deng, J.
Journal: Plant Diversity, 2024
Summary: The research explores plant diversity across dryland ecosystems in China, focusing on the distribution and relative importance of different life forms.

Initiation of Rest-Grazing During Soil Thawing Improves Plant Community Stability
Authors: Ma, K., Hou, Q., Xu, C., Xu, J., Yu, X.
Journal: Frontiers in Plant Science, 2024
Summary: Investigates the effects of rest-grazing on plant communities during soil thawing in alpine grasslands, emphasizing improved stability and interspecific relationships.

The Response of Alfalfa Production to Water and Air Temperature in Jinzhong Basin
Authors: Zhu, M., Niu, S.-S., Hou, Q.-Q., Yang, X., Xu, H.-Y.
Journal: Acta Agrestia Sinica, 2024
Summary: This study explores how environmental factors like water and air temperature affect alfalfa production in the Jinzhong Basin, Shanxi Province.

Conclusion

Given their substantial contributions to ecological restoration and ecosystem sustainability, particularly through cutting-edge research on desertification and microbial communities, this individual is highly suitable for the Best Researcher Award. With further international collaborations and a broader dissemination of their findings, they could achieve even greater recognition in global environmental research.

Md Mahfuzur Rahman | Cellulose | Best Researcher Award

Posted on by ScienceFather
Dr.  Bangladesh University of Textiles, Bangladesh

I am currently pursuing a B.Sc. degree in Textile Engineering with a specialization in Industrial and Production Engineering at the Bangladesh University of Textiles (BUTEX) in Bangladesh. Since 2018, I have been working as a research assistant at both BUTEX and North South University (NSU). My research interests include Nanomaterials & Nanomechanics, Semiconductor Electrophysics, Magnetic Materials, Wearable Smart Textiles, Biomedical applications, Thin Film Magnetism, First-principle DFT studies, and Engineered 2D Quantum Materials. I have previously conducted research on ferrite nanomaterials, synthesizing and characterizing their properties, as well as sustainable textiles. I have recently been working on smart textiles and experimental and DFT analysis of perovskite materials. Moreover, I actively participated in various clubs, including BUTEX Sports Club and BUTEX Youth Development Club, which honed my leadership and event management skills. From an early age, mathematics has been my favorite subject, and I have actively participated in the Bangladesh Mathematical Olympiad, achieving two awards. Additionally, in 2016, I secured the 12th position in the Bangladesh Physics Olympiad. I also participated at Asian Pacific Mathematical Olympiad. My penchant for creative endeavors inspired my research journey, which began in my first year of undergraduate studies.

Professional Profiles:

Orcid

🎯 Career Objective

I aim to be a valuable professional contributing to institutions and society through creative and impactful research. Seeking a research-oriented position to leverage my knowledge and skills, I thrive in challenging environments that foster continuous learning. My passion lies in Material Science related research.

🎓 Education

Bangladesh University of Textiles, Dhaka, BangladeshB.Sc. in Textile Engineering (Specialization in Industrial & Production Engineering) (2018-2023)CGPA: 3.16/4Rajshahi Govt. City College, Rajshahi, BangladeshHigher Secondary Certificate (2017)GPA: 5/5Agrani School and College, Rajshahi, BangladeshSecondary School Certificate (2015)GPA: 5/5

💻 Technical Qualifications

Computer Skills

C, Python, MS Office, OriginLab Software, FullProf Software, Imagej, CAD, CATIA, CASTEP, SolidWorks

Experimental Techniques

X-ray Diffraction (XRD), FTIR, FESEM, Transmission Electron Microscopy, UV-Visible Spectroscopy, Vibrating Sample Magnetometer, Universal Testing Machine, TGA, DTA

Theoretical Techniques

Rietveld Analysis, DFT Investigation, Stress and Displacement Analysis

🔬 Research Interests

Wearable Smart TextilesBiomedicalNanomaterials & NanomechanicsSemiconductor Electro-physicsAdditive ManufacturingThin Film MagnetismFirst-Principle DFT StudyPhotovoltaics

Strengths for the Award:

  • Research Contributions: The researcher should have a strong portfolio of impactful publications, such as high-quality journal articles, conference papers, or patents, that have significantly contributed to their field.
  • Innovation: The researcher’s work should demonstrate a high level of innovation, leading to new discoveries or advancements in technology, methodology, or understanding in their area of expertise.
  • Collaboration and Leadership: The researcher should have a track record of leading or collaborating on interdisciplinary projects, demonstrating their ability to work with a diverse range of experts.
  • Recognition and Awards: Previous recognition through awards, grants, or invitations to speak at conferences can highlight the researcher’s influence and reputation in their field.
  • Impact on Society: The research should have a tangible impact on society, such as applications in industry, policy changes, or contributions to solving real-world problems.

Areas for Improvement:

  • Broader Impact: While the researcher may have made significant contributions to a specific field, they may need to expand the reach of their work to have a broader impact across multiple disciplines.
  • Communication and Outreach: The ability to communicate research findings to a non-specialist audience, including the general public, policymakers, or industry stakeholders, is increasingly important. Improvement in this area could enhance the visibility and impact of their work.
  • Diversity and Inclusion: The researcher could focus more on mentoring underrepresented groups in their field or engaging in initiatives that promote diversity and inclusion in science and research.
  • Sustainability and Ethics: Depending on the research field, the researcher may need to incorporate more sustainable practices or address ethical considerations in their work.

✍️Publications Top Note :

Cellulose Fiber from Jute and Banana Fiber:

Publication: “Physical properties of isolated cellulose fiber from jute and banana fiber through kraft pulping: Potential applications in packaging and regenerated fibers.”

Journal: SPE Polymers (2024).

Focus: Investigation of the physical properties of cellulose fibers derived from jute and banana through kraft pulping. The study explores potential applications in packaging and the development of regenerated fibers.

Electromagnetic Properties of Al3+ Substituted Ni–Co Ferrites:

Publication: “Rietveld refined structural and sintering temperature dependent electromagnetic properties of Al3+ substituted Ni–Co ferrites prepared through sol–gel auto combustion method for high-frequency and microwave devices.”

Journal: Journal of Materials Science: Materials in Electronics (2024).

Focus: This research delves into the electromagnetic properties of Al3+ substituted Ni-Co ferrites, emphasizing their application in high-frequency and microwave devices.

Triboelectric Nanogenerators:

Publication: “Carbon-based Textile structured Triboelectric Nanogenerators for Smart Wearables.”

Status: Preprint (2024).

Focus: Development of carbon-based textile triboelectric nanogenerators aimed at powering smart wearable devices.

Magnetic and Optoelectronic Properties of Ni-Cu Spinel Ferrites:

Publication: “Magnetic, optoelectronic, and rietveld refined structural properties of Al3+ substituted nanocrystalline Ni-Cu spinel ferrites: An experimental and DFT based study.”

Journal: Journal of Magnetism and Magnetic Materials (2023).

Focus: Study of the magnetic, optoelectronic, and structural properties of Ni-Cu spinel ferrites, including experimental and theoretical (DFT) approaches.

Dielectric and Electrical Transport in Ni-Cu Spinel Ferrites:

Publication: “Structural, dielectric, and electrical transport properties of Al3+ substituted nanocrystalline Ni-Cu spinel ferrites prepared through the sol–gel route.”

Journal: Results in Physics (2022).

Focus: Analysis of dielectric and electrical transport properties in Al3+ substituted Ni-Cu spinel ferrites synthesized using the sol-gel method.

Structural and Magnetic Properties of Ni-Zn Ferrites:

Publication: “Structural, magnetic, and electrical properties of Ni0.38−xCu0.15+yZn0.47+x−yFe2O4 synthesized by sol–gel auto-combustion technique.”

Journal: Journal of Materials Science: Materials in Electronics (2021).

Conclusion:

  • Suitability for the Award: Based on the evaluation of strengths and areas for improvement, the researcher appears highly suitable for the “Best Researcher Award.” Their significant contributions to their field, coupled with a track record of innovation and leadership, make them a strong candidate.
  • Final Recommendation: While the researcher is highly qualified, they could further enhance their candidacy by expanding the impact of their work, engaging more with the broader community, and contributing to initiatives that promote diversity and sustainability in research.

Tao Wang | Geopolymer materials | Best Researcher Award

Posted on by ScienceFather
Mr.  Nanjing Hydraulic Research Institute, China

The research presents a method for developing high-strength, low-carbon geopolymer mortar using fly ash and slag under ambient curing conditions. It addresses the challenge of low strength in fly ash-based geopolymers by analyzing the impact of slag content on mechanical properties. The study also investigates the correlation between microstructural and macroscopic properties using grey relational analysis and assesses the environmental and economic benefits of varying slag content. This work offers practical guidance for advancing sustainable, high-performance geopolymer materials, supported by the National Natural Science Foundation of China.

Professional Profiles:

scopus

🏗️ About Our Research

🔍 Our study introduces an innovative method to develop high-strength geopolymer mortar that boasts low-carbon and environmentally friendly characteristics under ambient curing conditions. The research delves into the mechanical properties, microstructural attributes, and environmental benefits of this mortar. 🌍

🚧 Tackling the Strength Challenge

💡 Fly ash-based geopolymer mortar is celebrated for its eco-friendly benefits, but achieving high strength remains a challenge in modern structural engineering. While most studies focus on high-temperature curing, our research uniquely explores the influence of slag content on the mechanical properties of geopolymer mortar under ambient conditions.

🔬 Deep Dive: Microstructural and Mechanical Properties

📊 We conducted a thorough analysis of the microstructural performance and established a framework using the grey relational analysis method to correlate these findings with the mortar’s macroscopic mechanical properties. Additionally, we evaluated the environmental and economic impacts of varying slag content through statistical analysis.

🌱 Towards a Sustainable Future

🌱 This work provides valuable insights and practical guidance for the advancement of low-carbon, environmentally friendly, and high-performance geopolymer mortar, paving the way for future developments in sustainable construction materials.

🔗 Research Support

🏆 This research was generously supported by the National Natural Science Foundation of China (SN: 52171270, 51879168) and the Key Funded Projects of the National Natural Science Foundation of China-Regional Innovation and Development Joint Fund (U23A20672). We confirm that this work has not been submitted elsewhere for publication, and all authors have approved the enclosed manuscript.

Strengths for the Award

  1. Innovative Approach: The research introduces a novel method for developing high-strength geopolymer mortar under ambient curing conditions, addressing a crucial challenge in the field. The emphasis on low-carbon and environmentally friendly characteristics is timely and aligns with global sustainability goals.
  2. Comprehensive Analysis: The study offers a thorough investigation of both the mechanical properties and microstructural performance of the geopolymer mortar. The use of grey relational analysis to establish correlations between microstructural and mechanical properties adds depth to the research.
  3. Environmental and Economic Assessment: The inclusion of environmental and economic impact assessments demonstrates a holistic approach, considering not just the technical performance but also the broader implications of the material.
  4. Support from National Foundations: The research is backed by prestigious funding sources, such as the National Natural Science Foundation of China, which underscores the importance and credibility of the work.

Areas for Improvement

  1. Expansion of Application Scenarios: While the research focuses on ambient curing conditions, exploring the applicability of the developed mortar in different environmental conditions or comparing it with other curing methods could provide more comprehensive insights.
  2. Long-term Performance Evaluation: The study could benefit from a long-term performance analysis, including durability and sustainability over extended periods, to further validate the practical application of the geopolymer mortar.
  3. Broader Comparative Analysis: Including a broader range of comparisons with other high-strength construction materials could strengthen the argument for the practical adoption of geopolymer mortar in various structural engineering scenarios.

 

✍️Publications Top Note :

Development of High-strength Geopolymer Mortar Based on Fly Ash-slag: Correlational Analysis of Microstructural and Mechanical Properties and Environmental Assessment”

Authors: Wang, T., Fan, X., Gao, C.

Journal: Construction and Building Materials (2024), 441, 137515

 

“Performance of Geopolymer Paste under Different NaOH Solution Concentrations”

Authors: Wang, T., Fan, X., Gao, C., Qu, C.

Journal: Magazine of Concrete Research (2024)

 

“Shear Behavior and Strength Prediction of HFRP Reinforced Concrete Beams without Stirrups”

Authors: Gu, Z., Hu, Y., Gao, D., Wang, T., Yang, L.

Journal: Engineering Structures (2023), 297, 117030

 

“Effect of Different Loading Rates on the Fracture Behavior of FRP-Reinforced Concrete”

Authors: Liu, J., Fan, X., Wang, T., Qu, C.

Journal: Fatigue and Fracture of Engineering Materials and Structures (2023), 46(12), pp. 4743–4759

 

“The Influence of Fiber on the Mechanical Properties of Geopolymer Concrete: A Review”

Authors: Wang, T., Fan, X., Gao, C., Liu, J., Yu, G.

Journal: Polymers (2023), 15(4), 827

 

“Database-based Error Analysis of Calculation Methods for Shear Capacity of FRP-Reinforced Concrete Beams without Web Reinforcement”

Authors: Wang, T., Fan, X., Gao, C., Qu, C., Liu, J.

Journal: Journal of Southeast University (English Edition) (2023), 39(3), pp. 301–313

 

“Size Effect Theory on Shear Strength of RC Cantilever Beams without Stirrups”

Authors: Jin, L., Wang, T., Du, X.-L.

Journal: Jisuan Lixue Xuebao/Chinese Journal of Computational Mechanics (2020), 37(4), pp. 396–404

 

“Size Effect Theory on Shear Failure of RC Cantilever Beams”

Authors: Jin, L., Wang, T., Du, X.-L., Xia, H.

Journal: Gongcheng Lixue/Engineering Mechanics (2020), 37(1), pp. 53–62

 

“Size Effect in Shear Failure of RC Beams with Stirrups: Simulation and Formulation”

Authors: Jin, L., Wang, T., Jiang, X.-A., Du, X.

Journal: Engineering Structures (2019), 199, 109573

 

Conclusion

Tao Wang’s research on high-strength geopolymer mortar is innovative and impactful, addressing key challenges in the construction industry related to sustainability and strength. The study’s comprehensive analysis and consideration of environmental impacts make it a strong contender for the “Best Researcher Award.” However, expanding the research scope to include more comparative and long-term analyses could further enhance its significance.

Prof. Ameer Hilal | Geopolymer Award | Best Researcher Award

Posted on by ScienceFather

Prof. Ameer Hilal | Geopolymer Award | Best Researcher Award

Prof. Ameer Hilal, University of Anbar, Iraq

Prof. Ameer Hilal is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

 

Professional Profiles:

Scopus

Orcid

Academic Qualifications 🎓

Oct 2011 to Apr 2015: PhD in Civil Engineering
[University of Nottingham]Thesis: Properties and Microstructure of Pre-formed Foamed Concretes Supervisors: Dr. Nick Thom and Assoc. Prof. Andrew DawsonThe research aimed to produce foamed concrete using the preformed foam method, suitable for semi-structural or structural purposes, with good insulation and durability properties. It evaluated damage behavior, studied different mixes of foamed concrete for enhanced strength-to-weight ratio, and investigated mechanical, thermal, and permeation performance.Sep 2001 to Sep 2003: MSc in Civil Engineering [University of Anbar]Thesis title: Study of Production and Properties of Foamed ConcreteModules included Advanced Concrete Materials, Statistics, Structural Analysis, Mathematics, Hydraulic Structures, Pavement Design, Soil and Foundation Engineering, Concrete Design, Finite Elements Method.Sep 1994 to Jul 1998: BSc of Civil Engineering [University of Anbar]Modules covered Mathematics, Engineering Mechanics, Materials, Concrete Technology, Fluid Mechanics, Structures, Soil Mechanics, Highway Engineering, Reinforced Engineering, Construction Management, Surveying.

Administration Experience 💼

Engineer at Engineering Consultant Bureau/University of Anbar (2002-2006).Manager of Engineering Consultant Bureau/University of Anbar (2006-2011).Dean Assistant for Scientific Affairs, College of Engineering, University of Anbar (2017-Sep.2019).Deputy Dean, College of Engineering, University of Anbar (2018-present).

Academic Experience 📚

Research Assistant, Assistant Lecturer, Lecturer, Assistant Professor, Professor at Civil Engineering Department, University of Anbar.PhD study at the University of Nottingham/UK.Teaching Experience 📖 Courses taught include Concrete Laboratory, Concrete Technology, Theory of Structures, Engineering Mechanics, Mathematics, Design of Reinforced Concrete.Research Interest 🧪 Concrete Technology, Lightweight Concrete, Admixtures, Durability, Microstructure.

Personal Skills 🌟

Lecturing/presentation skills.Interpersonal, supervision, communication skills.Organization, attention to detail.Independent, proactive, decision-making, negotiation, problem-solving.Written report, oral presentations.Technical and Professional Skills 💻Knowledge of B.S. (UK) and ASTM standards.Lab testing, data analysis, research, reporting.Concrete Technology, Lightweight Concrete.Software: ImageJ, AutoCAD, Microsoft Office.Experience in Stadd-Pro, AutoCAD, optical microscopy, scanning electron microscopy.Supervision 👨‍🏫 Supervised various research projects on properties, production, and use of foamed concrete.

Membership 🤝

American Concrete Institute (ACI)American Society of Civil Engineers (ASCE)

Review Work🔍

Reviewer for international journals including Construction & Building Materials, International Journal of Concrete Structures and Materials, Journal of Advanced Concrete Technology, Journal of Materials in Civil Engineering.

📊 Citation Metrics (Google Scholar):

Citations by: All – 1087, Since 2019 – 920
h-index: All – 11, Since 2018 – 11
i10 index: All – 11, Since 2018 –11

📖 Publications  Top Note :

Predicting compressive strength of lightweight foamed concrete using extreme learning machine model

paper publication in

paper publication in

On entrained pore size distribution of foamed concrete

paper publication in

The use of additives to enhance properties of pre-formed foamed concrete

paper publication in

Microstructure of concrete

paper publication in

Pore structure and permeation characteristics of foamed concrete

paper publication in

Failure mechanism of foamed concrete made with/without additives and lightweight aggregate

paper publication in

Effect of crumb tyres rubber on some properties of foamed concrete

paper publication in

Properties and microstructure of pre-formed foamed concretes

paper publication in

Re-use of waste plastic as fibers in production of modified foamed concrete

paper publication in

Microstructure of concrete. High performance concrete technology and applications

paper publication in

Effect of aggregate roughness on strength and permeation characteristics of lightweight aggregate concrete

paper publication in

Assist Prof Dr. Hitesh Kumar Sharma | organic pollutants Award | Best Researcher Award

Posted on by ScienceFather

Assist Prof Dr. Hitesh Kumar Sharma |organic pollutants Award | Best Researcher Award

Assist Prof Dr. Hitesh Kumar Sharma, Meerut Institute of Technology, India

Dr. Addisu Frinjo Emma is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

 

Professional Profiles:

Google scholar

🎓 Seeking a Challenging Role in Scientific Analysis and Education

Scientific progress is pivotal for the advancement of human civilization. As an experienced educationist with a passion for scientific research, I am eager to contribute my skills and knowledge to an esteemed organization or educational institute committed to fostering scientific development. My journey in academia has equipped me with a diverse set of qualifications and experiences, highlighted below:

🔬 Educational Qualification

Ph.D. in Physics (2021) – Chaudhary Charan Singh University, Meerut, IndiaTitle: “Synthesis and Characterization of CNT-TiO2 Nanocomposites For Photocatalytic Applications”CSIR-UGC NET (2012)Master of Science in Physics (2012) – Chaudhary Charan Singh University, Meerut, IndiaBachelor of Education (2008) – Vedant College of Education, Hapur, IndiaBachelor of Science (Physics, Chemistry, Maths) (2007) – Hindu College, Moradabad, India

📚 Academic and Research Experience

Over a decade of teaching experience in renowned institutions, including Ch. Charan Singh University, Meerut, and currently at Meerut Institute of Technology.Research expertise in areas such as photocatalytic applications, organic compound degradation, water splitting for hydrogen production, and antibacterial activities.Proficient in experimental techniques including DC/RF Magnetron Sputtering, Spin Coating, Hydrothermal Method, and various spectroscopic methods.

📝 Research Publications and Presentations

Author of several peer-reviewed research papers published in reputed journals, as well as presentations at national and international conferences.Notable publications include studies on CNT-TiO2 nanocomposites, PbS thin films, and sputter deposited TiO2 thin films.

🏆 Awards and Recognitions

Recipient of the Best Paper Award in the 1st Edition of International Research Excellence Best Paper Awards.Patent holder for the hydrothermal process of preparing CNT-templated TiO2 nanospheres.

🌐 Workshops, Webinars, and Collaborations

Active participation in workshops and webinars on diverse topics including nanomaterials, intellectual property rights, and interdisciplinary research.Collaboration with international institutions for technical virtual training on nanomaterials and nanoparticle-based plasma bioscience.I am committed to utilizing my expertise and enthusiasm for scientific inquiry to contribute meaningfully to the growth and success of your organization. Together, let’s embark on a journey of discovery and innovation for the betterment of society and the nation.

📊 Citation Metrics (Google Scholar):

Citations by: All – 1135, Since 2018 –1003

h-index: All – 16, Since 2018 – 16

i10 index: All – 32, Since 2018 –28

📖 Publications  Top Note :

paper publication in
paper publication in
paper publication in
paper publication in