Surendra Kumar Patel | Surface Composite | Best Researcher Award

Published on by Mechanics Awards

Dr. Surendra Kumar Patel | Surface Composite | Best Researcher Award

Shandong University | China

Surendra Kumar Patel is a dedicated researcher and academic with a strong foundation in mechanical engineering and materials science, specializing in the development of advanced surface composites, friction stir processing, and bioactive materials for engineering and biomedical applications. He earned his Bachelor of Technology in Mechanical Engineering from Gautam Buddha Technical University, where he completed a thesis project on the fabrication of a windmill model and the utilization of wind energy, followed by a Master of Technology in Mechanical Engineering with a specialization in metal matrix composites at Maulana Azad National Institute of Technology Bhopal, where his research focused on microstructural analysis and slurry erosion wear behavior of silicon carbide and zircon sand reinforced LM-13 alloy composites, and later achieved a Ph.D. in Mechanical Engineering with specialization in surface composites at the National Institute of Technology Mizoram, where his doctoral thesis dealt with experimental investigations into the microstructural, mechanical, and tribological properties of WC and ZrSiO4 particle reinforced aluminium surface composites fabricated through the friction stir processing route. His professional career began as an Assistant Professor in the Department of Mechanical Engineering at Radharaman Engineering College, Bhopal, where he taught key subjects such as strength of materials, fluid mechanics, materials technology, mechanics of materials, and manufacturing technology, in addition to supervising undergraduate projects and serving as Head of Department for the polytechnic wing. Currently, he is serving as a Postdoctoral Fellow at the School of Materials Science and Engineering, Shandong University, China, under a special funded postdoctoral fellowship program, where his work is supported by multiple prestigious funding agencies including the National Natural Science Foundation of China, Shandong Provincial Science Foundation for Outstanding Young Scholars, and the Key Research and Development Program of Shandong Province. engineering, surface composites, and advanced friction stir processing technologies with both industrial relevance and biomedical potential.

Profile:  Google Scholar

Featured Publications:

Singh, V. P., Patel, S. K., Ranjan, A., & Kuriachen, B. (2020). Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: A critical review. Journal of Materials Research and Technology, 9(3), 6217–6256.

Singh, V. P., Patel, S. K., & Kuriachen, B. (2021). Mechanical and microstructural properties evolutions of various alloys welded through cooling assisted friction-stir welding: A review. Intermetallics, 133, 107122.

Patel, S. K., Singh, V. P., Roy, B. S., & Kuriachen, B. (2020). Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review. Materials Science and Engineering: B, 262, 114708.

Singh, V. P., Patel, S. K., Kumar, N., & Kuriachen, B. (2019). Parametric effect on dissimilar friction stir welded steel-magnesium alloys joints: A review. Science and Technology of Welding and Joining, 24(8), 653–684.

Patel, S. K., Kuriachen, B., Kumar, N., & Nateriya, R. (2018). The slurry abrasive wear behaviour and microstructural analysis of A2024-SiC-ZrSiO4 metal matrix composite. Ceramics International, 44(6), 6426–6432.

Patel, S. K., Singh, V. P., Kumar, D., Roy, B. S., & Kuriachen, B. (2022). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC nanoparticle through friction stir processing. Materials Science and Engineering: B, 276, 115476.

Patel, S. K., Singh, V. P., & Kuriachen, B. (2019). Friction stir processing of alloys with secondary phase particles: An overview. Materials and Manufacturing Processes, 34(13), 1429–1457.

Patel, S., Shah, M., Patel, J., & Kumar, N. (2009). Iron deficiency anemia in moderate to severely anaemia patients. Gujarat Medical Journal, 64(2), 15–17.

Yadav, P. K., Dixit, G., Dixit, S., Singh, V. P., Patel, S. K., Purohit, R., & Kuriachen, B. (2021). Effect of eutectic silicon and silicon carbide particles on high stress scratching wear of aluminium composite for various testing parameters. Wear, 482, 203921.

Patel, S. K., Singh, V. P., Roy, B. S., & Kuriachen, B. (in press). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC and ZrSiO4 nanoparticle through friction stir processing. Materials Science and Engineering: B.

Babak Akbari | Surface Modification | Best Researcher Award

Published on by Mechanics Awards

Assoc. Prof. Dr. Babak Akbari | Surface Modification | Best Researcher Award

University of Tehran | Iran

Dr. Babak Akbari is an Assistant Professor in the Department of Medical Technology and Tissue Engineering at the School of Life Science Engineering, University of Tehran. With an academic foundation in materials science and engineering, his career has been shaped by a passion for biomaterials, nanocomposites, and regenerative medicine. Over the years, Dr. Akbari has made notable contributions to the development of advanced scaffolds and biomimetic devices for tissue engineering, with a focus on cartilage, bone, and dental applications. His research bridges fundamental materials engineering with biomedical applications, exploring surface modification, nanotechnology, and polymer-based systems for improved biocompatibility and mechanical performance. Dr. Akbari has authored numerous international and national journal articles, books, and conference proceedings. His collaborations with interdisciplinary teams reflect his commitment to innovation in biomaterials and medical technologies, positioning him as a recognized researcher in advancing materials for healthcare and biomedical applications.

Professional Profile

Orcid

Scholar

Education

Dr. Babak Akbari pursued all of his higher education at Sharif University of Technology, one of Iran’s leading institutions for engineering and science. He obtained his B.S. in Materials Engineering – Metal Forming, developing a strong foundation in materials processing and mechanical behavior. Building on this, he earned his M.S. in Materials Engineering – Materials Identification and Selection, where he specialized in analyzing material properties and optimizing their use for various applications. His graduate research strengthened his skills in experimental characterization and design of advanced materials. Dr. Akbari then completed his Ph.D. in Materials Science and Engineering, focusing on the mechanical properties, microstructure, and nanocomposites of polymers and metals. His doctoral work emphasized the relationship between processing, structure, and performance, which laid the groundwork for his later research in biomaterials, nanotechnology, and biomedical applications. This educational path uniquely positioned him at the intersection of engineering and life sciences.

Experience

Dr. Babak Akbari has built a distinguished academic and research career centered on materials science, nanotechnology, and biomedical engineering. Following his doctoral studies, he engaged in extensive research on polymer nanocomposites, biomaterials, and scaffold fabrication. Currently, he serves as Assistant Professor at the University of Tehran, where he teaches and supervises graduate students in the Medical Technology and Tissue Engineering Department. His professional expertise spans the design and fabrication of bio-inspired devices, development of nanocomposite scaffolds, and application of surface modification techniques for enhanced biomedical performance. He has also co-authored international books on 3D printing and cartilage biofabrication, published by renowned publishers such as Taylor & Francis and Springer. Dr. Akbari has presented his work at multiple international conferences and contributed to the growth of the field through collaborative projects. His academic role combines research, teaching, and mentoring, ensuring the training of the next generation of biomedical engineers.

Research Focus

Dr. Akbari’s research focuses on biomaterials, nanotechnology, and regenerative medicine. He specializes in the design and fabrication of nanocomposite scaffolds for tissue engineering, particularly in bone and cartilage regeneration. His work integrates polymer science, nanostructures, and surface modification techniques to develop biomimetic materials with enhanced mechanical strength, bioactivity, and cellular compatibility. Dr. Akbari also investigates drug delivery systems, employing polymer-based nanofibers and coatings for controlled release of antibiotics and bioactive molecules. His research extends to dental composites, biodegradable stents, and bio-inspired medical devices, highlighting his interdisciplinary approach. With expertise in 3D printing, electrospinning, and polymer functionalization, he aims to create scalable and clinically relevant solutions for tissue repair. Furthermore, his studies on nanoclay, carbon nanotubes, and graphene-based composites advance knowledge on hybrid biomaterials. Overall, Dr. Akbari’s research contributes to developing innovative platforms for improving healthcare outcomes through engineering-driven biomedical technologies.

Awards and Honors

Dr. Babak Akbari has received recognition for his contributions to biomaterials and tissue engineering research. His publications in high-impact journals and his role in pioneering nanocomposite scaffold design have earned him acknowledgment within the scientific community. His co-authored books, published by Taylor & Francis and Springer, are significant achievements reflecting his expertise in 3D printing and cartilage biofabrication. Dr. Akbari has been invited to present at national and international conferences, showcasing his research on polymer nanocomposites, scaffolds, and biomedical devices. His teaching excellence at the University of Tehran has been recognized by students and colleagues, and his collaborative research has attracted partnerships with international institutions. By contributing to interdisciplinary advancements in nanotechnology, drug delivery, and regenerative medicine, Dr. Akbari has established himself as a respected scholar. These honors reflect his dedication to bridging materials science with biomedical innovation to address pressing healthcare challenges.

Publication Top Notes

Conclusion

Babak Akbari demonstrates potential as a researcher in materials science and tissue engineering, with a strong academic background and research experience. His compilation of books on topics related to his research interests is notable, and his research has the potential to make a significant impact in his field. With further development of his international publication record and research funding, he could become a strong candidate for the Best Researcher Award.

Jinde Zhang | Bioinspired Functional Surfaces | Best Researcher Award

Published on by Mechanics Awards

Mr. Jinde Zhang | Bioinspired Functional Surfaces  | Best Researcher Award

Assistant Professor at University of Massachusetts Lowell,United States

Dr. Jinde Zhang, a Research Assistant Professor at the University of Massachusetts Lowell, specializes in polymer engineering and superhydrophobic coatings. 🌟 With expertise in surface chemistry, drag reduction, and anti-ice adhesion, Dr. Zhang’s research impacts sustainable materials and advanced composites. 🌍 His innovative contributions have been featured in leading scientific journals. 🧪

Publication Profile

orcid

Education🎓

Ph.D. in Plastics Engineering, University of Massachusetts Lowell, 2015.  M.S. in Polymer Chemistry and Physics, University of Science and Technology of China, 2011.  B.S. in Applied Chemistry, Xidian University, China, 2007.

Experience👨‍🔬 

Research Assistant Professor, University of Massachusetts Lowell, 2022–Present. Research Scientist, University of Massachusetts Lowell, 2017–2022  Postdoctoral Researcher, University of Massachusetts Lowell, 2015–2017.

Awards and Honors🏆

Hosted the Polymer Processing Society International Conference, 2018. Region IV Middle School Science Fair Mentor, 2013–2015. Nanodays Volunteer, Boston Museum of Science, 2013–2015.

Research Focus🔬

Superhydrophobic coatings for drag reduction and corrosion resistance. Development of anti-ice adhesion materials.  Recycling impacts on carbon nanotube-filled composites.  Roll-to-roll processing for advanced polymers.

Publications 📖

Tuning Wetting Properties Through Surface Geometry in the Cassie–Baxter State

Journal: Biomimetics, 2025-01-02

DOI: 10.3390/biomimetics10010020

Contributors: Talya Scheff, Florence Acha, Nathalia Diaz Armas, Joey L. Mead, Jinde Zhang

Structure–Property Relationships for Fluorinated and Fluorine-Free Superhydrophobic Crack-Free Coatings

Journal: Polymers, 2024-03-24

DOI: 10.3390/polym16070885

Contributors: Sevil Turkoglu, Jinde Zhang, Hanna Dodiuk, Samuel Kenig, Jo Ann Ratto Ross, et al.

Effect of Composition on Adhesion and Chemical Resistance in Multilayer Elastomer Laminates

Journal: ACS Applied Polymer Materials, 2023-03-30

DOI: 10.1021/acsapm.3c00132

Contributors: Jianan Yi, Mykhel Walker, Jinde Zhang, Christopher J. Hansen, Walter Zukas, Joey Mead

Dynamic Wetting Properties of Silica-Poly(Acrylic Acid) Superhydrophilic Coatings

Journal: Polymers, 2023-02-28

DOI: 10.3390/polym15051242

Contributors: Sevil Turkoglu, Jinde Zhang, Hanna Dodiuk, Samuel Kenig, Jo Ann Ratto, Joey Mead

Wetting Characteristics of Nanosilica-Poly(Acrylic Acid) Transparent Anti-Fog Coatings

Journal: Polymers, 2022-11-01

DOI: 10.3390/polym14214663

Contributors: Sevil Turkoglu, Jinde Zhang, Hanna Dodiuk, Samuel Kenig, Jo Ann Ratto, Joey Mead

The Reduction in Ice Adhesion Using Controlled Topography Superhydrophobic Coatings

Journal: Journal of Coatings Technology and Research, 2022-10-18

DOI: 10.1007/s11998-022-00682-2

Contributors: Yujie Wang, Jinde Zhang, Hanna Dodiuk, Samuel Kenig, Jo Ann Ratto, Carol Barry, Joey Mead

The Effect of Superhydrophobic Coating Composition on Topography and Ice Adhesion

Journal: Cold Regions Science and Technology, 2022-09

DOI: 10.1016/j.coldregions.2022.103623

Contributors: Yujie Wang, Jinde Zhang, Hanna Dodiuk, et al.

Improved Adhesion in Elastomeric Laminates Using Elastomer Blends

Journal: Rubber Chemistry and Technology, 2022-07-01

DOI: 10.5254/rct.22.78968

Contributors: Jianan Yi, Erin Keaney, Jinde Zhang, et al.

Listeria Monocytogenes Biofilm Formation as Affected by Stainless Steel Surface Topography and Coating Composition

Journal: Food Control, 2021-12

DOI: 10.1016/j.foodcont.2021.108275

Contributors: Tingting Gu, Apisak Meesrisom, Jinde Zhang, et al.

Effect of Protein Adsorption on Air Plastron Behavior of a Superhydrophobic Surface
(Details forthcoming or under publication)

Conclusion

Zhang Jinde is an exceptional candidate for the Best Researcher Award due to his innovative contributions to materials science, specifically in the area of superhydrophobic surfaces. His work not only advances academic knowledge but also holds significant potential for real-world applications. Zhang’s ability to bridge interdisciplinary fields and engage with the wider scientific and public community adds further strength to his candidacy. Continued collaboration, diversification of research topics, and enhanced public engagement will elevate his already impressive research trajectory. Therefore, Zhang Jinde is highly deserving of recognition for his groundbreaking work in the realm of polymer engineering and material science.

Julia Puseletso Mofokeng | nanocomposites | Women Researcher Award

Published on by Mechanics Awards

Dr. Julia Puseletso Mofokeng | nanocomposites | Women Researcher Award

Senior Lecturer / Researcher at University of the Free State, South Africa

Dr. Julia Puseletso Mofokeng is a Senior Lecturer and Researcher in the Department of Chemistry at the University of the Free State (UFS), QwaQwa Campus, South Africa. She holds a Ph.D. in Polymer Science (2015) from UFS, where she also obtained her M.Sc. and B.Sc. degrees. Her research focuses on polymer-titania nanocomposites and sustainable polymers. As an NRF Y2-rated Emerging Researcher (2021-2025), Dr. Mofokeng is recognized for her contributions to polymer science, receiving the Best Emerging Researcher award in Natural and Agricultural Sciences (QwaQwa Campus) in 2016.

Publication Profile

orcid

scopus

Academic and Research Contributions

Dr. Mofokeng teaches Honours-level modules in Physical Polymer Science and Polymer Testing and Characterization at UFS. She supervises Honours, Master’s, and Ph.D. students, actively publishing research in polymer science. In her roles, she oversees the research laboratory, sources research funding, and contributes to curriculum development.

Professional Experience

Since 2019, Dr. Mofokeng has been a Senior Lecturer, previously serving as a Lecturer (2017–2018), Officer in Professional Services (2011–2017), and Research Assistant (1999–2011). Her extensive experience in research operations has involved hands-on roles in laboratory management, equipment maintenance, student training, and conducting complex polymer analyses.

Skills and Expertise

Dr. Mofokeng is proficient in a variety of scientific instruments, including DSC, TGA, FTIR, DMA, and rheometers, essential for polymer characterization and analysis. She has experience with SEM, TEM, and STEM techniques and is skilled in synthesizing polymers, composites, and nanocomposites.

Publication  Top Notes

 

Preparation of PLA/PHBV/GO Composites for Lead Ion Removal

Publication: Polymer Composites, 2024

Focus: Develops PLA/PHBV/GO composites specifically for selectively removing Pb(II) ions from water.

Synthesis of Graphene Oxide for Lead Ion Removal

Publication: Carbon Trends, 2024

Focus: Details the synthesis and properties of GO aimed at lead ion adsorption in water.

Morphology and Thermal Properties of PLA/PHBV/GO Composites

Publication: Polymer Engineering and Science, 2024

Focus: Analyzes structural and thermal aspects of PLA/PHBV/GO composites.

Properties of Polybutylene Succinate-Pineapple Leaf Fiber Composites

Publication: Heliyon, 2023

Focus: Discusses chemical and thermal properties of eco-friendly PBS composites using waste fibers.

Review on Graphene-Based Biodegradable Polymer Composites

Publication: Materials, 2023

Focus: Reviews the use of graphene in polymer composites for heavy metal adsorption in water.

Polysiloxane in Guar Gum-Polyaniline Matrix

Publication: International Journal of Biological Macromolecules, 2018

Focus: Studies the effect of polysiloxane on the thermal and optical properties of a modified guar gum matrix.

LDPE with Carbon Black, Zinc, and Paraffin Wax

Publication: Journal of Polymer Research, 2017

Focus: Investigates the thermo-switch properties of LDPE composites with various additives.

Thermal Stability of PCL/PLA Composites with Layered Silicates

Publication: Polymer Testing, 2016

Focus: Explores thermal stability enhancements in PCL/PLA composites.

PLA/PHBV Nanocomposites with TiO₂ as Filler

Publication: Journal of Applied Polymer Science, 2015

Focus: Analyzes the thermal degradation and morphology of PLA/PHBV blends with TiO₂ fillers.

Dynamic Mechanical Properties of Various Biodegradable Polymer Blends

Publication: Thermochimica Acta, 2015

Focus: Examines mechanical properties of PLA/PHBV, PLA/PCL, and PHBV/PCL blends with TiO₂ nanofillers.

 

Conclusion

Dr. Mofokeng’s achievements and dedication make her a strong candidate for the Research for Women Researcher Award. Her contributions to polymer science, leadership in academia, and consistent service to the University of the Free State highlight her commitment to her field and inspire future women researchers. With continued efforts to expand her international research footprint, she stands poised to make an even greater impact in polymer science.

Prof Dr. Satya Prakash | Functional Biomaterial Award | Best Researcher Award

Published on by Mechanics Awards

Prof Dr. Satya Prakash | Functional Biomaterial Award | Best Researcher Award

Prof Dr. Satya Prakash, McGill University, Canada

Prof Dr. Satya Prakash is academic and researcher in the field of renewable energy, holds a PhD in Bio systems Engineering from Kangwon National University, South Korea. His academic journey has been marked by a profound dedication to advancing solar energy technologies, specifically in solar thermal harvesting and its integration into agricultural and architectural applications.

Professional Profiles:

Google scholar

🔬 Research Funding:

Prof. Satya Prakash has secured over 48 funded research grants, demonstrating his ability to attract significant financial support for his research endeavors. Additionally, he currently maintains four active grants, indicating the ongoing relevance and impact of his work.

🏆 Distinguished James McGill Professor Endowment:

This prestigious endowment recognizes Prof. Prakash as an outstanding original researcher of world-class caliber and an international leader in his field. It provides eight years of salary endowment and citation, further cementing his reputation and contributions.

💰 Salary Endowments:

Prof. Prakash holds four salary endowments, including the CIHR New Investigator award and the FRSQ Chercher-Boursier Junior 1 award, which provide substantial financial support and relieve him of teaching and administrative responsibilities, allowing him to focus on research.

🎖️ Recognition and Awards:

With over 27 awards, honors, and recognitions to his name, including the esteemed Academician title from the Royal Society of Canada, Prof. Prakash’s contributions to academia and research are widely celebrated and acknowledged.

📝 Patents and Spin Offs:

Prof. Prakash’s innovative work has led to the development of four successful spin-offs and over 75 approved or pending patents. This demonstrates his commitment to translating research into tangible applications that benefit society and industry.

📊 Citation Metrics (Google Scholar):

Citations: 20,298

h-index: 64

i10-index: 445

Person/Entity 2:

Citations: 8,160

h-index: 39

i10-index: 180

📖 Publications  Top Note :

Microbiome, probiotics and neurodegenerative diseases: deciphering the gut brain axis

Authors: S Westfall, N Lomis, I Kahouli, SY Dia, SP Singh, S Prakash

Published in: Cellular and molecular life sciences, 74, 3769-3787, 2017

Cholesterol-lowering efficacy of a microencapsulated bile salt hydrolase-active Lactobacillus reuteri NCIMB 30242 yoghurt formulation in hypercholesterolaemic …

Authors: ML Jones, CJ Martoni, M Parent, S Prakash

Published in: British Journal of Nutrition, 107 (10), 1505-1513, 2012

Gut microbiota: next frontier in understanding human health and development of biotherapeutics

Authors: S Prakash, L Rodes, M Coussa-Charley, C Tomaro-Duchesneau

Published in: Biologics: targets and therapy, 71-86, 2011

Cholesterol lowering and inhibition of sterol absorption by Lactobacillus reuteri NCIMB 30242: a randomized controlled trial

Authors: ML Jones, CJ Martoni, S Prakash

Published in: European journal of clinical nutrition, 66 (11), 1234-1241, 2012

Polymeric nanohybrids and functionalized carbon nanotubes as drug delivery carriers for cancer therapy

Authors: S Prakash, M Malhotra, W Shao, C Tomaro-Duchesneau, S Abbasi

Published in: Advanced drug delivery reviews, 63 (14-15), 1340-1351, 2011

Carbon nanotube lipid drug approach for targeted delivery of a chemotherapy drug in a human breast cancer xenograft animal model

Authors: W Shao, A Paul, B Zhao, C Lee, L Rodes, S Prakash

Published in: Biomaterials, 34 (38), 10109-10119, 2013

Pallidol, a resveratrol dimer from Cissus pallida

Authors: MA Khan, SG Nabi, S Prakash, A Zaman

Published in: Phytochemistry, 25 (8), 1945-1948, 1986

Seismic performance of circular RC columns subjected to axial force, bending, and torsion with low and moderate shear

Authors: S Prakash, A Belarbi, YM You

Published in: Engineering Structures, 32 (1), 46-59, 2010

Superior cell delivery features of poly (ethylene glycol) incorporated alginate, chitosan, and poly-L-lysine microcapsules

Authors: T Haque, H Chen, W Ouyang, C Martoni, B Lawuyi, AM Urbanska, …

Published in: Molecular Pharmaceutics, 2 (1), 29-36, 2005

High temperature oxidation studies of detonation-gun-sprayed Cr3C2–NiCr coating on Fe-and Ni-based superalloys in air under cyclic condition at 900° C

Authors: S Kamal, R Jayaganthan, S Prakash

    • Published in: Journal of alloys and compounds, 472 (1-2), 378-389, 2009

Avraam isayev | Nanocomposites | Best Researcher Award

Published on by Mechanics Awards

Prof Dr avraam isayev | Nanocomposites | Best Researcher Award

Ph.D. in Polymer Engineering and Science – USSR Academy of Sciences, Moscow.

Prof. Dr. Avraam Isayev is a distinguished figure in the field of polymer engineering and education, with a career spanning several decades. He is known for his significant contributions to academia, particularly during his tenure at the University of Akron, Ohio, USA. Throughout his career, Dr. Isayev has held various esteemed positions, including Distinguished Professor Emeritus, Adjunct Professor, Distinguished Professor, Interim Director, Director, Associate Professor, and Professor. Notably, he played a pivotal role as the Director of the Molding Technology Research and Development Center (MOLDTECH) from 1990 to 2009. Dr. Isayev is a member of several prestigious professional societies, including the Society of Plastics Engineers, the Society of Rheology, the Rubber Division of the ACS, the Polymer Processing Society, the American Chemical Society, the American Institute of Chemical Engineers, the American Ceramic Society, and the Tire Society. His exceptional contributions to the field have been recognized through numerous awards and honors, solidifying his reputation as a leading authority in polymer engineering. Dr. Isayev’s work has significantly impacted the field of polymer science and engineering, making him a highly respected figure in his field.

 

Professional Profiles:

 

Education:

 Dr. Avraam Isayev is a highly accomplished scholar and researcher with an extensive academic background in engineering and mathematics. He earned his Master of Science degrees in Chemical Engineering from the Azerbaijan Institute of Oil and Chemistry in Baku, USSR, in 1964, and in Applied Mathematics from the Moscow Institute of Electronic Machine Building in Moscow, USSR, in 1975. His educational journey culminated in a Ph.D. in Polymer Engineering from the Topchiev Institute of Petrochemical Synthesis and Science at the USSR Academy of Sciences in Moscow in 1970. These academic achievements laid the foundation for Dr. Isayev’s illustrious career in the field of polymer engineering, where he has made significant contributions to research, education, and professional development. His expertise and dedication have earned him recognition as a leading authority in his field.

 

Employment:

Dr. Avraam Isayev is a distinguished academician and researcher with a remarkable career spanning over five decades. He has held various prestigious positions in the field of polymer engineering, including Distinguished Professor Emeritus and Adjunct Professor at the University of Akron, Ohio, USA. Dr. Isayev’s journey began with his doctoral studies and research at the Institute of Petrochemical Synthesis of the USSR Academy of Sciences in Moscow, where he later served as a Research Associate. Throughout his career, he has contributed significantly to academia, industry, and research institutions globally, leaving an indelible mark on the field of polymer engineering.

Award and Honor:

Dr. Avraam Isayev is a distinguished figure in the field of polymer engineering, renowned for his extensive contributions to research, academia, and industry. Throughout his illustrious career, Dr. Isayev has been recognized with numerous awards and honors, including the Melvin Mooney Distinguished Technology Award from the Rubber Division of the American Chemical Society (ACS) in 1999 and the George S. Whitby Award for Distinguished Teaching and Research from the ACS in 2011. His innovative work has earned him accolades such as the NorTech Innovation Award for Ultrasonic Devulcanization Extruder and Technology in 2011 and the James L. White Innovation Award from The Polymer Processing Society in 2012. Dr. Isayev’s impact extends beyond the academic sphere, as demonstrated by his 2017 election as a Member of the European Union Academy of Sciences (EUAS) and his nomination for the 2018 ENI Award in Advanced Environmental Solutions. He has also been recognized for his influential contributions to materials science, being ranked among the top 2% of scientists worldwide within his specialty area throughout his career. Dr. Isayev’s remarkable achievements underscore his dedication to advancing the field of polymer engineering and his significant impact on the global scientific community.

Research Interest:

Dr. Avraam Isayev’s research interests span a wide range of topics within the field of polymer engineering. His expertise encompasses polymer processing, rheo-optics, and the rheology of polymers, with a focus on their applications in oil products and disperse systems. Dr. Isayev has made significant contributions to molding technologies, including injection, co-injection, transfer, compression, and gas-assisted injection molding of polymers. His work extends to the development of self-reinforced or in-situ composites based on liquid crystal polymers (LCP), as well as the continuous decrosslinking of thermosets and rubbers. Dr. Isayev is also known for his research in copolymerization of polymer blends using high-power ultrasound, and he has explored the realm of high-temperature and high-performance nanocomposites. Additionally, he has worked on developing constitutive equations and process modeling techniques to enhance the understanding and optimization of polymer processes. Dr. Isayev’s diverse research portfolio underscores his commitment to advancing the fundamental understanding and practical applications of polymer engineering.

Service to the University of Akron:

Dr. Avraam Isayev has played an active role in various administrative and advisory capacities throughout his tenure. He served as a Faculty Observer on the Board of Trustees in 1991/92 and was a member of the Advisory Committee to the President in 1989/90, 1991/92, and 2005/2006. Dr. Isayev was also a part of the University Council from 1988 to 1992 and contributed to the Advisory Committee to the Provost in 1990/91 and 1994/95. His dedication to improving faculty status is evident from his involvement in the Ad Hoc Committee on Mechanisms to Enhance Faculty Status from 1985 to 1987 and the Library Committee from 1989 to 1991. Additionally, he chaired the Faculty Search Committee for the Department of Polymer Engineering on several occasions and was involved in selecting the Dean of the College of Polymer Science and Polymer Engineering in 1988. Dr. Isayev’s commitment to academic excellence is further demonstrated through his participation in various committees, such as the Graduate Admission Committee, College Appeal Committee, Faculty Senate, Campus Facilities and Planning Committee, University Planning and Budget Committee, College Promotion and Tenure Committee, Search Committee for Director of Research and Sponsored Program, Student Policy Committee, and University Distinguished Professor Committee, where he contributed to the enhancement of the university’s academic and research endeavors.

Publications Top Notes:

Rheology: concepts, methods, and applications

Cited by- 958  year- 2022

Injection and compression molding fundamentals

Cited by- 345  year- 2017

Novel ultrasonic technology for devulcanization of waste rubbers

Cited by- 323  year- 1995

Toward a viscoelastic modelling of the injection molding of polymers

Cited by- 312  year- 1987

Ultrasound assisted twin screw extrusion of polymer–nanocomposites containing carbon nanotubes

Cited by- 241  year- 2009

Quiescent polymer crystallization: modelling and measurements

Cited by- 224  year- 1994