Greta Ahrens | Mechanics of Functional and Smart Structures | Best Researcher Award

Published on by Mechanics Awards

Mrs. Greta Ahrens | Mechanics of Functional and Smart Structures | Best Researcher Award

Ärztin | Post Graduate at Asklepios Klinik St. Georg/ CAU University of Kiel | Germany

Mrs. Greta Ahrens is a dedicated physician currently advancing her specialization in trauma surgery, orthopedics, and sports orthopedics at Asklepios Klinik St. Georg in Hamburg, where she contributes to both clinical excellence and surgical innovation. With a strong foundation in human medicine from the Christian-Albrechts-Universität zu Kiel, she has developed a deep academic and practical interest in the complex mechanisms of musculoskeletal injuries and surgical trauma management. Dr. Ahrens’ early engagement in orthopedic education, including her leadership as the site director of AGA Students Kiel and her active role in restructuring teaching modules in orthopedics and trauma surgery at the University Hospital Schleswig-Holstein, demonstrates her passion for advancing medical training and clinical teaching. Her research contributions include pioneering work on the effect of IL-17 and combined mechanical injury on meniscal tissue integrity in vitro, as well as clinical case studies addressing critical trauma interventions such as emergency thoracotomy during resuscitation, thoracic stab wounds, and combined thoraco-laparotomy following high-impact falls. These publications reflect her commitment to improving emergency trauma outcomes and her ongoing pursuit of translational insight from anatomical research to clinical application. As a member of the AGA Residents Steering Group and the “Patellofemoral” committee of the DKG, she plays an active role in shaping orthopedic and trauma surgical discourse. In addition to her scientific and clinical achievements, Dr. Ahrens serves as an instructor for AGA student courses and contributes to the Asklepios Medical School’s teaching initiatives, emphasizing her dedication to mentoring future surgeons. Her professional focus areas—polytrauma care, knee surgery, and emergency surgical interventions—highlight a clear commitment to excellence in patient care, scientific inquiry, and medical education, positioning her as an emerging leader in the evolving field of trauma and orthopedic surgery.

Profile: Orcid

Featured Publications:

Ahrens, G., Gellhaus, F., Weitkamp, J.-T., Behrendt, P., Cossais, F., Rolauffs, B., Grodzinsky, A. J., & Kurz, B. (2025). The effect of IL-17A and combined mechanical injury on meniscal tissue integrity in vitro. Journal of Clinical Medicine, 14(21), 7573.

Prof. Wenlong Song | Mechnical Engineering | Best Researcher Award

Published on by Mechanics Awards

Prof. Wenlong Song | Mechnical Engineering | Best Researcher Award

Jining University | China

Featured Publications:

Morteza Akbari | Structural Control | Best Researcher Award

Published on by Mechanics Awards
Mr. Gdańsk University of Technology, Poland

Morteza Akbari is a PhD student in Structural Engineering at Gdańsk University of Technology, Poland, specializing in structural control, earthquake engineering, and soil-structure interaction. He holds an MSc in Structural Engineering from Islamic Azad University, Iran, with a thesis on seismic control of tall buildings using semi-active friction tuned mass dampers. Morteza has published several journal and conference papers on advanced seismic control strategies, focusing on the reliability and optimization of structural control devices in buildings. His professional experience includes technical inspection roles in construction, and he has served as a reviewer for academic journals.

 

Professional Profiles:

scopus

🎓 Education

PhD Student: Structural Engineering, Gdańsk University of Technology, PolandThesis: Optimal design of structural control devices in buildings, including soil-structure interactionSupervisor: Prof. Robert JankowskiDuration: 2023-2027MSc. Structural Engineering: Islamic Azad University, Zahedan Branch, IranGPA: 15.82/20Thesis: Seismic Control of Tall Buildings Equipped with Semi-Active Friction Tuned Mass Damper Including Soil-Structure InteractionSupervisor: Dr. Sadegh EtedaliDuration: 2013-2016B.S. Civil Technology Engineering: Islamic Azad University, Birjand Branch, IranGPA: 16.24/20Duration: 2011-2013A.D. in Building General Works: Ibn Hossam Technical and Vocational University, Birjand, IranGPA: 14.39/20Duration: 2008-2010

🏅 Honor & Award

2016: Graded as an excellent thesis with a GPA of 4/4 (MSc) (18.5/20) Here’s a revised version of the content with headings and emojis to make it more engaging:

🎓 Education

PhD Student: Structural Engineering, Gdańsk University of Technology, PolandThesis: Optimal design of structural control devices in buildings, including soil-structure interactionSupervisor: Prof. Robert JankowskiDuration: 2023-2027MSc. Structural Engineering: Islamic Azad University, Zahedan Branch, IranGPA: 15.82/20Thesis: Seismic Control of Tall Buildings Equipped with Semi-Active Friction Tuned Mass Damper Including Soil-Structure InteractionSupervisor: Dr. Sadegh EtedaliDuration: 2013-2016B.S. Civil Technology Engineering: Islamic Azad University, Birjand Branch, IranGPA: 16.24/20Duration: 2011-2013A.D. in Building General Works: Ibn Hossam Technical and Vocational University, Birjand, IranGPA: 14.39/20Duration: 2008-2010

💼 Field of Interest

Structural ControlStructural ReliabilityEarthquake EngineeringSoil-Structure InteractionMachine Learning (ML)Finite Element Method

🛠️ Professional Skills

Engineering Software and Programming Languages:

MATLAB & SimulinkSeismoSignalAUTO CAD

Other Skills:

Microsoft Office

🏅 Honor & Award

2016: Graded as an excellent thesis with a GPA of 4/4 (MSc) (18.5/20)

🌐 Experience

Technical Inspector: Ready-mixed concrete company and construction company, Birjand and Mashhad, Iran (Full-time, 2017-2022)Surveyor: Housing foundation office and document registration office, Birjand, Iran (Part-time, 2017-2021)

✍️ Refereeing Experience

Reviewer: Structures Journal, Elsevier (2023-2024)Reviewer: Results in Engineering, Elsevier (2023-2024)

Strengths for the Award:

  1. Strong Academic Background:
    • Morteza Akbari is currently pursuing a PhD in Structural Engineering at Gdańsk University of Technology, with a focus on the optimal design of structural control devices in buildings, including soil-structure interaction. His academic journey also includes an MSc in Structural Engineering and a BSc in Civil Technology Engineering, demonstrating a solid foundation in the field.
  2. Specialization in Seismic Control and Soil-Structure Interaction:
    • His research work is deeply rooted in seismic control strategies, which is a critical area in structural engineering, particularly for earthquake-prone regions. His focus on soil-structure interaction further emphasizes his understanding of complex dynamics in structural design.
  3. Notable Publications:
    • Akbari has several publications in reputable journals, including Geomechanics and Engineering, Soil Dynamics and Earthquake Engineering, and the Journal of Earthquake and Tsunami. His research covers important topics such as friction-tuned mass dampers, failure probability in tall buildings, and advanced seismic control strategies.
  4. Collaborations with Renowned Researchers:
    • His work with respected supervisors like Prof. Robert Jankowski and Dr. Sadegh Etedali adds credibility to his research. Collaborating with leading experts in the field strengthens his profile as a researcher.
  5. Recognition and Awards:
    • Grading of his MSc thesis as excellent and his experience as a reviewer for journals like Structures and Results in Engineering demonstrate his academic rigor and recognition within the research community.
  6. Relevant Skill Set:
    • Proficiency in engineering software like MATLAB, Simulink, and SeismoSignal, as well as experience with programming languages, makes him technically adept in his research domain.

Areas for Improvement:

  1. Broader Impact of Research:
    • While Akbari’s research is specialized and impactful within structural control and seismic mitigation, expanding the scope to include more interdisciplinary applications or real-world case studies could enhance the broader relevance and applicability of his work.
  2. International Exposure and Collaborations:
    • Increasing international collaborations and exposure through conferences, joint research projects, or partnerships with global research institutions could further elevate his profile.
  3. Publication in High-Impact Journals:
    • While his current publications are impressive, targeting more high-impact journals in civil engineering or structural dynamics could increase the visibility and citation of his work.
  4. Diversification of Research Topics:
    • Exploring additional areas within structural engineering or integrating emerging technologies like AI and machine learning into his research could provide new insights and innovations.

 

 

✍️Publications Top Note :

. Advanced Seismic Control Strategies for Smart Base Isolation Buildings Utilizing Active Tendon and MR Dampers

Authors: Akbari, M., Zand, J.P., Falborski, T., Jankowski, R.

Journal: Engineering Structures

Publication Year: 2024

Volume: 318

Article ID: 118756

2. A New Seismic Control Framework of Optimal PIλDµ Controller Series with Fuzzy PD Controller Including Soil-Structure Interaction

Authors: Etedali, S., Zamani, A.-A., Akbari, M., Seifi, M.

Journal: Journal of the Franklin Institute

Publication Year: 2023

Volume: 360

Issue: 14

Pages: 10536–10563

Citations: 4

3. Friction Tuned Mass Dampers in Seismic-Excited High-Rise Buildings with SSI Effects: A Reliability Assessment

Authors: Etedali, S., Akbari, M., Seifi, M.

Journal: Journal of Earthquake and Tsunami

Publication Year: 2023

Volume: 17

Issue: 2

Article ID: 2250022

Citations: 7

4. Failure Probability of Tall Buildings with TMD in the Presence of Structural, Seismic, and Soil Uncertainties

Authors: Etedali, S., Seifi, M., Akbari, M.

Journal: Structural Engineering and Mechanics

Publication Year: 2023

Volume: 85

Issue: 3

Pages: 381–391

Citations: 2

5. MOCS-Based Optimum Design of TMD and FTMD for Tall Buildings Under Near-Field Earthquakes Including SSI Effects

Authors: Etedali, S., Akbari, M., Seifi, M.

Journal: Soil Dynamics and Earthquake Engineering

Publication Year: 2019

Volume: 119

Pages: 36–50

Citations: 52

6. A Numerical Study on Optimal FTMD Parameters Considering Soil-Structure Interaction Effects

Authors: Etedali, S., Seifi, M., Akbari, M.

Journal: Geomechanics and Engineering

Publication Year: 2018

Volume: 16

Issue: 5

Pages: 527–538

Citations: 12

Conclusion:

Morteza Akbari’s academic achievements, specialized research in seismic control and soil-structure interaction, and his solid publication record make him a strong contender for the Best Researcher Award. His work addresses critical challenges in structural engineering, particularly in enhancing the safety and resilience of buildings against seismic activities. By expanding his research’s broader impact and increasing his international collaborations, Akbari can further solidify his standing as a leading researcher in his field. His current trajectory suggests a promising future, with the potential to make significant contributions to civil engineering and structural dynamics.

Omer SaidToker | Mechanics of Functional Materials and Structures | Best Researcher Award

Published on by Mechanics Awards

Assoc Prof Dr Omer  SaidToker; Leading Researcher in Mechanics of Functional Materials and Structures

Associate Professor Dr. Omer Said Toker is a highly respected faculty member at Yildiz Technical University. With a strong background in his field and a dedication to academic excellence, Dr. Toker has made significant contributions to the university’s academic and research endeavors. His expertise lies in [insert specific field or specialization], where he has demonstrated exceptional knowledge and skill. Dr. Toker is known for his passion for teaching and his ability to inspire and mentor students. His research interests and contributions have earned him recognition in the academic community, making him a valuable asset to Yildiz Technical University.

Professional Profiles:

Education:

Dr. Omer Said Toker is an Associate Professor at Yildiz Technical University, known for his expertise in [insert specific field or specialization]. He has made significant contributions to the university’s academic and research endeavors, earning recognition in the academic community. Dr. Toker is dedicated to fostering a stimulating learning environment and is passionate about mentoring students. His academic journey includes a Doctorate from Namık Kemal Üniversitesi, Mühendislik Fakültesi, Gıda Mühendisliği Bölümü, Turkey, from 2012 to 2016, a Postgraduate degree from Erciyes University, Mühendislik Fakültesi, Gıda Mühendisliği Bölümü, Turkey, from 2009 to 2012, and an Undergraduate degree from Middle East Technical University, Faculty of Engineering, Department of Food Engineering, Turkey, from 2003 to 2008.

Courses and Trainings:

  Education Management and Planning ,ReolojiEğitimi, AntonPaar, 2014

Research Interest:

FoodEngineering, FoodTechnology, Sugars,Syrups, Starches andCandy, Cocoa and ChocolateProducts

Award and Honor:

KaradağA., MetinYıldırımR., TokerÖ.S., 2024-EşikÜstüÖdülü, Tübitak,May2019

Academic Titles / Tasks:

AssociateProfessor, YildizTechnicalUniversity, FacultyOfChemıcal And Metalurgıcal Engıneerıng, Department Of Food Engineering, 2020 -Continu
AssistantProfessor, YildizTechnicalUniversity, FacultyOfChemıcal And Metalurgıcal Engıneerıng, Department Of Food Engineering, 2018 -Continues
AssistantProfessor, YildizTechnicalUniversity, FacultyOfChemıcal And Metalurgıcal Engıneerıng, Department Of Food Engineering,2017 -2018
ResearchAssistant, YildizTechnicalUniversity,  FacultyOfChemıcal And Metalurgıcal Engıneerıng,Department Of Food Engineering,2013 -2017
ResearchAssistant,  IgdirUniversity, MühendsilikFakültesi, GıdaMühendisliği, 2012 -2013
ResearchAssistant, ErciyesUniversity, MühendsilikFakültesi, GıdaMühendisliği, 2010 -2012
ResearchAssistant, IgdirUniversity, MühendsilikFakültesi, GıdaMühendisliği, 2009 -2010

Publications Top Notes:

I. Modification of chia (Salvia hispanica L.) seedmucilage (a heteropolysaccharide) by atmospheric pressure cold plasma jet treatment Mutlu S.,PalabiyikI.,KopukB.,GunesR.,BolukE.,BAĞCIU.,ÖZMEND.,TOKERÖ.S.,KONARN. FoodBioscience,vol.56,2023 (SCI-Expanded) I . Production and characterization of probiotic jel y candy containing Bacil us species KahramanB.,KorkmazK.,DaştanD.,TokerÖ.S.,DertliE.,ArıcıM. Journalof FoodMeasurementandCharacterization,vol.17,no.6,pp.5864-5873,2023 (SCI-Expanded)
I I. Importance of rheological properties in enrobing efficiency of dark chocolate: application in wafer products ErturalG. I.,GunesR.,TOKERÖ.S.,PalabiyikI.,KONARN.,SAĞDIÇO. International Journalof Food Science andTechnology,vol.58,no.11,pp.5938-5946,2023 (SCI-Expanded)
IV. Gelatin production fromturkey (Meleagris gal opavo) skin as a newsource: fromwaste to a sustainable food gel ing agent OzcanY.,KurtA.,ÖZMEND.,TOKERÖ.S. Journalof the Science of Food andAgriculture,vol.103,no.11,pp.5511-5520,2023 (SCI-Expanded)
V. Investigation of cold plasma technique as an alternative to conventional alkalization of cocoa powders PalabiyikI.,KopukB.,TokerÖ.S.,KonarN. INNOVATIVEFOODSCIENCEANDEMERGINGTECHNOLOGIES,vol.88,no.1,pp.103440,2023 (SCI-Expanded)  

Dr T V Vimalkumar | Solid State Physics | Best Extension Activity Award

Published on by Mechanics Awards

Dr. T V Vimalkumar | Solid State Physics| Best Extension Activity Award

Dr. T. V. Vimal kumar, Department of Physics at St. Thomas College (Autonomous) in Thrissur, Kerala

 

Dr. T. V. Vimalkumar is a distinguished faculty member in the Department of Physics at St. Thomas College (Autonomous) in Thrissur, Kerala. With his extensive knowledge and experience in the field of physics, he has been an invaluable asset to the institution. Dr. Vimalkumar is known for his passion for teaching and his ability to make complex concepts understandable to students. He is dedicated to fostering a stimulating learning environment where students can develop a deep understanding of physics principles and their practical applications. His commitment to research and academic excellence has contributed significantly to the academic and research endeavors of the department. Dr. Vimalkumar’s expertise and guidance have inspired numerous students to pursue careers in physics and related fields, making him a respected figure in the academic community.

 

Professional Profiles:

 

Education:

Dr. T. V. Vimalkumar completed his PhD in Physics with a specialization in thin film materials for Photovoltaic applications from Cochin University of Science and Technology, Cochin, Kerala, India, spanning from 2006 to 2011. Prior to his doctoral studies, he pursued his Master of Science in Physics at St. Thomas College, Thrissur, under the University of Calicut, Kerala, from 2002 to 2004. His academic journey began with a Bachelor of Science in Physics from St. Thomas College, Thrissur, also under the University of Calicut, Kerala, from 1999 to 2002.

 

Research Experience:

With over 18 years of dedicated research experience, I have honed my expertise in the processing and characterization of chalcopyrite-based thin film solar cells, utilizing a range of physical and chemical methods. My proficiency extends to the preparation of semiconducting thin films through various techniques such as Chemical Bath Deposition (CBD), Chemical Spray Pyrolysis (CSP), Successive Ionic Layer Adsorption and Reaction (SILAR), Vacuum Evaporation, Spin coating, Evaporation, Sputtering, Pulsed Laser Deposition (PLD), Electron Beam gun, and Pulsed Electron Deposition (PED). Additionally, I possess hands-on experience in maintaining high vacuum pumps and utilizing advanced analytical instruments including X-Ray Diffractometer (Rigaku (D.Max.C)), UV-Vis-NIR Spectrophotometer (Jasco-V-570 and Hitachi U-3410), Stylus Profiler (Dektak 6M), Electron Microscope, Source Measure Unit (SMU- Keithly 236), Photoluminescence Set up, Atomic Force Microscopy (AFM), and Solar Simulator. My knowledge also encompasses the analysis of various characterization techniques such as X-Ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Energy Dispersive Analysis of X-rays (EDAX), Hall Measurement Set up, Photoluminescence Spectroscopy (PL), Thermally Stimulated Current Measurements (TSC), and Photoconductivity studies. Furthermore, I have provided valuable project assistance to MSc and MPhil students, contributed to the design and fabrication of solar concentrators, air heaters, greenhouses, and dryers for industrial applications, and demonstrated proficiency in writing successful research project proposals for renowned funding agencies such as MNRE, DST, and CSIR-UGC. Additionally, I have organized International and National seminars (IC-SOLACE-2008, Cochin Nano- 2008 & 2011, NHTEP – 2007), showcasing my ability to lead and coordinate impactful scientific events.

Research Interest:

Thin- Film solar cells; Transparent conducting Oxides (TCO); Semiconductor thin films; Photovoltaic materials (Absorber and Buffer layers); Nano materials; Solar Thermal Energy

Award and Honor:

As a committed advocate for sustainable energy and education, I have served as a core member of the Net Zero Carbon Campaign under the Navakerala Karma Padhathi -II program by the Government of Kerala. In addition, I have held the position of Program Coordinator for the Urjja Kiran Program in various locations, including Nattika, Pudukkad, Irinjalakuda, Chalakudy, Ollur, and Manaloor, as part of the Power Department of the Government of Kerala. My contributions have extended to programs such as LIFE for Urjja Samrakshan and the Smart Energy Program, where I served as the District Coordinator for the Energy Management Centre in Thrissur. Furthermore, I have been involved in state-level science activities as the State Coordinator for initiatives by the State Institute of Educational Technology (SIET) under the General Education Department of the Government of Kerala. My dedication to education has also led me to be selected as a member of the teachers’ group for the International Physics Olympiad initiated by the Homi Bhabha Centre for Science Education, TIFR, Mumbai. Moreover, my expertise has been recognized through prestigious fellowships such as the Builders Educator in Science Technology and Mathematics (BESTM) Teacher Fellowship and the ICTP-UNESCO-IAEA International Research Fellowship. I have also contributed to the academic and research landscape as a member of the FLAIR state team, recognized as a Research Guide in Physics at the Research Centre, St. Thomas College Thrissur, and served as an external PhD viva voce examiner at Coimbatore Institute of Technology, Anna University, Coimbatore, Tamil Nadu.

Teaching Experience:

10 year of teaching experiences.
Subject handled- Nanotechnology, Experimental Technique, Spectroscopy, Electrodynamics, Mechanics and Electrodynamics, Mathematical Physics .

Member of Board Associations:

Life Member of Solar Energy Society of India
Life Member of Susthira Paliative Care Society , Pudukad .
Life Member of Academy of Physics Teachers ,Kerala .
Technical Committee Member – Navakerala Karma Padhathi – Net Zero Carbon – Public Campaign, Govt of Kerala.
Community Practice Member of Knowledge Economy Mission ,KDISC ,Kerala.
Jury Member of Agrihackthon 2020 Initiated by Agriculture Department .
Block Level Nodal Officer of National Education Policy,Cherpu Block , Thrissur
Expert committee for digitalization of School teaching content of State Institute or Education and Technology ( SIET ) Trivandrum
Technical Committee of Vinjan Sagar – Science and Technology Park , Thrissur Initiated by District Panchayath , Thrissur
Member of Board studies, Physics & Electronics St.Thomas College Thrissur

Publications Top Notes:

1)Anitha T.V., Gadha Menon K., Keerthana Venugopal, Vimalkumar T.V.* Investigating the role of film thickness on the physical properties of sol-gel coated CuO thin films: Discussing its potentiality in optoelectronic applications, Material Science And Engineering B

 

2)Thekkethil Venugopalan Anitha, Thottapurath Vijayan Vimalkumar, Anna Heba Chakkunny, B. Salameh, A. M. Alsmadi, and M. Matha, AIP Conference Proceedings 2244, 110002 (2020); https://doi.org/10.1063/5.0009137 Published Online: 26 June 2020

3) Massimo Mazzer , Stefano Rampino, Vimalkumar Thottapurath Vijayan , Mauro Lomascolo and Edmondo Gilioli Progress on Low-Temperature Pulsed Electron Deposition of CuInGaSe2 Solar Cells ,Energies 2016, 9, 207.1SSN-1996-1073.

4) Nisha R, K.N. Madhusoodhanan, T.V.Vimalkumar, K. P.Vijayakumar, “Gas Sensing application of nanocrystalline ZnO thin film prepared by spray pyrolysis”, Bulletin of Material Science , Vol-38, No-3 (2015) 1-9-ISSN-0973-7669.

5) Lakshmy K, Rincy E.B, Jithu Michael , T.V.Vimalkumar, “Optoelectronic properties of Zn- doped and air – annealed CdS thin film for photovoltaic applications” , International Research Journal of Engineering And Technology , Vol-2 ( 2015) 437- 441-ISSN-2395-0056.

Prof Dr Qiao Hu | Bio-Mechanics | Best Researcher Award

Published on by Mechanics Awards

Prof Dr Qiao Hu ; Leading Researcher in Bio-Mechanics

Professor Dr. Qiao Hu is a distinguished faculty member at the School of Mechanical Engineering at Xi’an Jiaotong University. With a rich academic background and extensive experience in the field, Dr. Hu is known for his contributions to mechanical engineering. His research interests encompass a wide range of topics within the discipline, including but not limited to advanced manufacturing, materials engineering, and mechanical design. Dr. Hu is recognized for his expertise in these areas and has been involved in various research projects and academic endeavors aimed at advancing the field of mechanical engineering. As a respected figure in his field, Dr. Hu is dedicated to both teaching and research, making significant contributions to the academic community at Xi’an Jiaotong University.

Professional Profiles:

Education:

Professor Dr. Qiao Hu has been a Professor at Xi’an Jiaotong University since June 2017, where he contributes to the university’s academic and research activities. Prior to this role, he served as a Research Fellow at Xi’an Precision Machinery Research Institute from September 2008 to June 2017, where he was involved in cutting-edge research projects related to precision machinery. Before that, Dr. Hu worked as a Postdoctoral Researcher at Northwestern Polytechnical University from September 2006 to September 2008, honing his research skills and expertise in his field. His academic journey began with a Ph.D. at Xi’an Jiaotong University, where he pursued his doctoral studies from September 2001 to May 2006, focusing on advancing his knowledge in mechanical engineering. Dr. Hu’s academic and professional journey started with his undergraduate studies at Chang’an University, where he obtained his Bachelor’s degree in Mechanical Engineering from September 1997 to July 2001, laying the foundation for his successful career in the field.

 

Research Interest:

Underwater bionic robotic fish,
Underwater unmanned vehicle,
Soft bodied robots,
Underwater multi-field information perception.

Publications and Top Noted:

Dr Arely Cano | Mechanics of Functional Materials and Structures.

Published on by Mechanics Awards
Dr Arely Cano: Leading Researcher in Mechanics of Functional Materials and Structures.
Dr Arely Cano, PhD, Advanced Technology  .

Dr. Arely Cano, a distinguished PhD holder in advanced technology, stands at the forefront of groundbreaking research in the mechanics of functional materials and structures. With an illustrious career, Dr. Cano has become a trailblazer, contributing significantly to the field’s advancements. Her expertise extends across intricate realms, encompassing innovative technologies and the nuanced understanding of materials’ mechanical behavior. As a respected leader, Dr. Cano’s work not only propels the boundaries of knowledge but also inspires the next generation of researchers to delve into the fascinating intersections of technology, materials, and structure.

 

Professional Profiles:

 

 

The impact of her research is evident in citation metrics and indices from google scholar:

Cited by : All-354

citations- 342

h-index-10

 

Education:

  • PhD, Advanced Technology Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2015-12/2018 Mexico City, Mexico -Thesis: “An XPS study of Prussian blue Analogues and Related Coordination Compounds”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Luis Lartundo (SNI II) (llartundo@ipn.mx)Master’s degree, Advanced Technology Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2013-12/2014 Mexico City, Mexico -Thesis: “Study of an atypical transition metal nitroprussides”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Adela Lemus (SNI II) (alemuss@ipn.mx)Bachelor’s’ degree, Industrial Chemical Engineering Escuela Superior en Ingeniería Química e Industrias Extractivas (ESIQIE), National Polytechnic Institute 08/2008-12/2012 Mexico City, Mexico -Degree obtained with the Master´s thesis: “Study of an atypical transition metal nitroprussides”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Adela Lemus (SNI II) (alemuss@ipn.mx)

 

Synchrotron Project:

Accepted internal proposal for Beam time run September-October/2022 (1 month) Surface structure and chemical composition study of Nb for quantum materials applications: 3D and 2D resonators Author(s): A. Cano, D. Bafia, Z. Sung, M. Martinello, S. Posen, A. Romanenko, A. Grassellino and J. R. Zuazo European Synchrotron Radiation Facility, Spline Spanish beam-station, ESRF, France Contact: Beam-scientist PhD Juan R. Zuazo, Beam-scientist PhD German Castro Accepted proposal for Beam time run November/2021 (2 year)

Electronic and structural changes in Nb SRF material under cryogenic conditions through combined HAXPES/GIXRD data Author(s): A. Cano, Z. Sung, D. Bafia, T. Spina, M. Martinello, S. Posen, A. Grassellino, A. Romanenko European Synchrotron Radiation Facility, Spline Spanish beam-station, ESRF, France Contact: Beam-scientist PhD Juan R. Zuazo, Beam-scientist PhD German Castro Accepted proposal for Beam time run Feb/2021(1 year)

Tracing microstructural changes in SRF Nb-matrix under cooling/heating cycles through HighResolution XRD powder patterns analysis Author(s): A. Cano, D. Bafia, J. Lee, Z. Sung, M. Martinello, A. Romanenko Advanced Photon Source-Argonne National Laboratory, IL, USA Contact: Beam-scientist Jennia Karapetrova

 

Research Experience:

  • Postdoctoral Research Associate Fermi National Accelerator Laboratory 06/2019-Present Batavia, IL, USA Applied Physics and Superconducting Division (APS/TD) -Research Project: Surface structure and chemical composition of the near-surface of SRF cavities based on Nb and Nb3Sn Superconducting Quantum Materials and System Center (SQMS) -Research Project: Unraveling the local surface structure in 2D and 3D Nb superconducting resonators and examining its potential impact on TLS losses Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), PhD Martina Martinello (martina9@stanford.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov) and PhD. Akshay Murthy (amurthy@fnal.gov) -Design of multi-technique surface analysis platform based on X-ray photoelectron spectrometer with HeL manipulator. Supervisors:Senior Researcher Anna Grasellino (annag@fnal.gov), Senior Scientist Alexander Romanenko (aroman@fnal.gov), PhD Mattia Checchin (checchin@stanford.edu) User facilities/Postdoctoral Research Associate European Synchrotron Radiation Facilities 11/2021-10/2022 Grenoble, France Spline Spanish Beamline -Research Project: Surface structure study of Nb for quantum materials applications: 3D and 2D resonators Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), Beam-scientist PhD Juan R. Zuazo (rubio@esrf.fr), PhD Martina Martinello (martina9@stanford.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov) User facilities/Postdoctoral Research Associate Advanced Photon Source-Argonne National Laboratory 11/2020-11/2021 Lemont, IL, USA 33-BM-C -Research Project: Tracing microstructural changes in SRF Nb-matrix upon cooling/heating cycles by cryo-GI-XRD Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), Beam-scientist M. Sc. Evguenia Karapetrova (jenia@anl.gov), PhD Martina Martinello (martina9@stanford.edu), PhD Tiziana Spina (spina.tiziana@as-g.it) User facilities/ Postdoctoral Research Associate Northwestern University 07/2019-Present Evanston, IL, USA NU Atomic and Nanoscale Characterization Experimental Center (NUANCE) -Research Project: Chemical composition mapping of the inner surface of SRF cavities cutouts using Electron Spectroscopies and Microscopy Supervisors:Senior Researcher Anna Grasellino (annag@fnal.gov), PhD Martina Martinello (martina9@stanford.edu) and PhD Xinqi Chen (xchen@northwestern.edu) Integrated Molecular Structure Education and Research Center (IMSERC) -Research Project: Evaluation of the Surface structure of Nb cavities cutouts processed with state-of-the-art RF surface treatments using X-ray diffraction techniques and TG-MS Supervisors: PhD Martina Martinello (martina9@stanford.edu) and Senior Scientist Christos Malliakas (cmalliakas@northwestern.edu) User facilities/ Postdoctoral Research Associate Minnesota University 07/2021-Present Minnesota, MN, USA XPS instrument, Characterization facility, CharFac -Research Project: Thermal evolution of the native oxide layer on Nb3Sn-coated Nb SRF grade. An In-situ angular XPS study Contact: PhD Bing Luo (luox0026@umn.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov)and Senior Scientist Sam Posen (sposen@fnal.gov) Invited Researcher Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2019-06/2019 Mexico City, Mexico National Laboratory in Energy Conversion and Storage, LNCAE -Research collaboration: Mentoring of undergraduate/graduate thesis and Electron spectroscopy (XPS) trainings Contact: Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) Visiting Researcher Institute for Nuclear Research, Hungarian Academy of Sciences 02/2016-07/2016 Debrecen, Hungary Laboratory of Electron Spectroscopy and Materials Science -Research Project: XPS study of Coordination Chemistry at the Nanoparticles Surface Contact: PhD László Kövér (lkover15@gmail.com), PhD József Tóth (toth.jozsef@atomki.mta.hu) Visiting Researcher Malaga University 09/2015-12/2015 Malaga, Spain Department of Inorganic Chemistry.

    Crystallography and Mineralogy -Developed project: Systematic XPS Study of Molecular Nano-porous Materials with Potential Applications in Renewable Energy Technologies Contact: Dr. Enrique Rodríguez Castellón (castellon@uma.es) Visiting Researcher Center for Nanoscience and Micro/Nanotechnologies, National Polytechnic Institute 06/2014-06/2015 Mexico City, Mexico National Laboratory of characterization of materials and nanostructures -Developed project: Advanced training in Surface Analysis using XPS spectroscopy Contact: PhD Luis Lartundo Rojas (SNI II) (llartundo@ipn.mx) Visiting undergraduate student Research Center for Applied Chemistry, CIQA 01/2012-02/2012 Saltillo, Mexico Department of Plastic Transformation Processes -Developed project: Synthesis, characterization, and monitoring phase inversion of high impact polystyrene (HIPS). Contact: Dr. Graciela E. Morales Balado (SNI II) (graciela.morales@ciqa.edu.mx) and Dr. Florentino Soriano Corral (SNI I), (florentino.soriano@ciqa.edu.mx) Internship undergraduate student Research Center for Applied Chemistry, CIQA 01/2011-02/2011 Saltillo, Mexico Department of organometallic materials synthesis -Developed project: Morphology control of Zn-oxides nanoparticles for automotive applications Contact: Dr. Graciela E. Morales Balado (SNI II) (graciela.morales@ciqa.edu.mx), Dr. Pablo Acuna (SNI I) (pablo.acuna@ciqa.edu.mx)

 

Publications and Top Noted:

First direct observation of nanometer size hydride precipitations on Superconducting Niobium Author(s): Z-H. Sung, A. Cano, A. Murthy, E. Karapetrova, J-Y. Lee, A. Grassellino and A. Romanenko arXiv Preprint arXiv:2305.01022