Dr T V Vimalkumar | Solid State Physics | Best Extension Activity Award

Published on by Mechanics Awards

Dr. T V Vimalkumar | Solid State Physics| Best Extension Activity Award

Dr. T. V. Vimal kumar, Department of Physics at St. Thomas College (Autonomous) in Thrissur, Kerala

 

Dr. T. V. Vimalkumar is a distinguished faculty member in the Department of Physics at St. Thomas College (Autonomous) in Thrissur, Kerala. With his extensive knowledge and experience in the field of physics, he has been an invaluable asset to the institution. Dr. Vimalkumar is known for his passion for teaching and his ability to make complex concepts understandable to students. He is dedicated to fostering a stimulating learning environment where students can develop a deep understanding of physics principles and their practical applications. His commitment to research and academic excellence has contributed significantly to the academic and research endeavors of the department. Dr. Vimalkumar’s expertise and guidance have inspired numerous students to pursue careers in physics and related fields, making him a respected figure in the academic community.

 

Professional Profiles:

 

Education:

Dr. T. V. Vimalkumar completed his PhD in Physics with a specialization in thin film materials for Photovoltaic applications from Cochin University of Science and Technology, Cochin, Kerala, India, spanning from 2006 to 2011. Prior to his doctoral studies, he pursued his Master of Science in Physics at St. Thomas College, Thrissur, under the University of Calicut, Kerala, from 2002 to 2004. His academic journey began with a Bachelor of Science in Physics from St. Thomas College, Thrissur, also under the University of Calicut, Kerala, from 1999 to 2002.

 

Research Experience:

With over 18 years of dedicated research experience, I have honed my expertise in the processing and characterization of chalcopyrite-based thin film solar cells, utilizing a range of physical and chemical methods. My proficiency extends to the preparation of semiconducting thin films through various techniques such as Chemical Bath Deposition (CBD), Chemical Spray Pyrolysis (CSP), Successive Ionic Layer Adsorption and Reaction (SILAR), Vacuum Evaporation, Spin coating, Evaporation, Sputtering, Pulsed Laser Deposition (PLD), Electron Beam gun, and Pulsed Electron Deposition (PED). Additionally, I possess hands-on experience in maintaining high vacuum pumps and utilizing advanced analytical instruments including X-Ray Diffractometer (Rigaku (D.Max.C)), UV-Vis-NIR Spectrophotometer (Jasco-V-570 and Hitachi U-3410), Stylus Profiler (Dektak 6M), Electron Microscope, Source Measure Unit (SMU- Keithly 236), Photoluminescence Set up, Atomic Force Microscopy (AFM), and Solar Simulator. My knowledge also encompasses the analysis of various characterization techniques such as X-Ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Energy Dispersive Analysis of X-rays (EDAX), Hall Measurement Set up, Photoluminescence Spectroscopy (PL), Thermally Stimulated Current Measurements (TSC), and Photoconductivity studies. Furthermore, I have provided valuable project assistance to MSc and MPhil students, contributed to the design and fabrication of solar concentrators, air heaters, greenhouses, and dryers for industrial applications, and demonstrated proficiency in writing successful research project proposals for renowned funding agencies such as MNRE, DST, and CSIR-UGC. Additionally, I have organized International and National seminars (IC-SOLACE-2008, Cochin Nano- 2008 & 2011, NHTEP – 2007), showcasing my ability to lead and coordinate impactful scientific events.

Research Interest:

Thin- Film solar cells; Transparent conducting Oxides (TCO); Semiconductor thin films; Photovoltaic materials (Absorber and Buffer layers); Nano materials; Solar Thermal Energy

Award and Honor:

As a committed advocate for sustainable energy and education, I have served as a core member of the Net Zero Carbon Campaign under the Navakerala Karma Padhathi -II program by the Government of Kerala. In addition, I have held the position of Program Coordinator for the Urjja Kiran Program in various locations, including Nattika, Pudukkad, Irinjalakuda, Chalakudy, Ollur, and Manaloor, as part of the Power Department of the Government of Kerala. My contributions have extended to programs such as LIFE for Urjja Samrakshan and the Smart Energy Program, where I served as the District Coordinator for the Energy Management Centre in Thrissur. Furthermore, I have been involved in state-level science activities as the State Coordinator for initiatives by the State Institute of Educational Technology (SIET) under the General Education Department of the Government of Kerala. My dedication to education has also led me to be selected as a member of the teachers’ group for the International Physics Olympiad initiated by the Homi Bhabha Centre for Science Education, TIFR, Mumbai. Moreover, my expertise has been recognized through prestigious fellowships such as the Builders Educator in Science Technology and Mathematics (BESTM) Teacher Fellowship and the ICTP-UNESCO-IAEA International Research Fellowship. I have also contributed to the academic and research landscape as a member of the FLAIR state team, recognized as a Research Guide in Physics at the Research Centre, St. Thomas College Thrissur, and served as an external PhD viva voce examiner at Coimbatore Institute of Technology, Anna University, Coimbatore, Tamil Nadu.

Teaching Experience:

10 year of teaching experiences.
Subject handled- Nanotechnology, Experimental Technique, Spectroscopy, Electrodynamics, Mechanics and Electrodynamics, Mathematical Physics .

Member of Board Associations:

Life Member of Solar Energy Society of India
Life Member of Susthira Paliative Care Society , Pudukad .
Life Member of Academy of Physics Teachers ,Kerala .
Technical Committee Member – Navakerala Karma Padhathi – Net Zero Carbon – Public Campaign, Govt of Kerala.
Community Practice Member of Knowledge Economy Mission ,KDISC ,Kerala.
Jury Member of Agrihackthon 2020 Initiated by Agriculture Department .
Block Level Nodal Officer of National Education Policy,Cherpu Block , Thrissur
Expert committee for digitalization of School teaching content of State Institute or Education and Technology ( SIET ) Trivandrum
Technical Committee of Vinjan Sagar – Science and Technology Park , Thrissur Initiated by District Panchayath , Thrissur
Member of Board studies, Physics & Electronics St.Thomas College Thrissur

Publications Top Notes:

1)Anitha T.V., Gadha Menon K., Keerthana Venugopal, Vimalkumar T.V.* Investigating the role of film thickness on the physical properties of sol-gel coated CuO thin films: Discussing its potentiality in optoelectronic applications, Material Science And Engineering B

 

2)Thekkethil Venugopalan Anitha, Thottapurath Vijayan Vimalkumar, Anna Heba Chakkunny, B. Salameh, A. M. Alsmadi, and M. Matha, AIP Conference Proceedings 2244, 110002 (2020); https://doi.org/10.1063/5.0009137 Published Online: 26 June 2020

3) Massimo Mazzer , Stefano Rampino, Vimalkumar Thottapurath Vijayan , Mauro Lomascolo and Edmondo Gilioli Progress on Low-Temperature Pulsed Electron Deposition of CuInGaSe2 Solar Cells ,Energies 2016, 9, 207.1SSN-1996-1073.

4) Nisha R, K.N. Madhusoodhanan, T.V.Vimalkumar, K. P.Vijayakumar, “Gas Sensing application of nanocrystalline ZnO thin film prepared by spray pyrolysis”, Bulletin of Material Science , Vol-38, No-3 (2015) 1-9-ISSN-0973-7669.

5) Lakshmy K, Rincy E.B, Jithu Michael , T.V.Vimalkumar, “Optoelectronic properties of Zn- doped and air – annealed CdS thin film for photovoltaic applications” , International Research Journal of Engineering And Technology , Vol-2 ( 2015) 437- 441-ISSN-2395-0056.

Prof Dr Qiao Hu | Bio-Mechanics | Best Researcher Award

Published on by Mechanics Awards

Prof Dr Qiao Hu ; Leading Researcher in Bio-Mechanics

Professor Dr. Qiao Hu is a distinguished faculty member at the School of Mechanical Engineering at Xi’an Jiaotong University. With a rich academic background and extensive experience in the field, Dr. Hu is known for his contributions to mechanical engineering. His research interests encompass a wide range of topics within the discipline, including but not limited to advanced manufacturing, materials engineering, and mechanical design. Dr. Hu is recognized for his expertise in these areas and has been involved in various research projects and academic endeavors aimed at advancing the field of mechanical engineering. As a respected figure in his field, Dr. Hu is dedicated to both teaching and research, making significant contributions to the academic community at Xi’an Jiaotong University.

Professional Profiles:

Education:

Professor Dr. Qiao Hu has been a Professor at Xi’an Jiaotong University since June 2017, where he contributes to the university’s academic and research activities. Prior to this role, he served as a Research Fellow at Xi’an Precision Machinery Research Institute from September 2008 to June 2017, where he was involved in cutting-edge research projects related to precision machinery. Before that, Dr. Hu worked as a Postdoctoral Researcher at Northwestern Polytechnical University from September 2006 to September 2008, honing his research skills and expertise in his field. His academic journey began with a Ph.D. at Xi’an Jiaotong University, where he pursued his doctoral studies from September 2001 to May 2006, focusing on advancing his knowledge in mechanical engineering. Dr. Hu’s academic and professional journey started with his undergraduate studies at Chang’an University, where he obtained his Bachelor’s degree in Mechanical Engineering from September 1997 to July 2001, laying the foundation for his successful career in the field.

 

Research Interest:

Underwater bionic robotic fish,
Underwater unmanned vehicle,
Soft bodied robots,
Underwater multi-field information perception.

Publications and Top Noted:

Dr AlaaMohamed Adam | Materials science | Excellence in Research

Published on by Mechanics Awards
Dr Alaa Mohamed Adam: Leading Researcher in Materials science
Dr Alaa Mohamed Adam,   Department of physics, Faculty of Science, Sohag University, Sohag, Egypt.    

Dr. Alaa Mohamed Adam, associated with Sohag University, is a distinguished researcher making significant strides in the realm of material science. His leadership in research underscores a commitment to advancing our understanding of materials and their applications. Dr. Adam’s work contributes to the forefront of scientific knowledge, with a focus on innovative approaches within material science. Through his research endeavors, he plays a vital role in elevating Sohag University’s profile as a hub for cutting-edge scientific inquiry, fostering advancements that hold the potential to impact various industries and technologies.

 

Professional Profiles:

 

 

Education:

 

1 – PhD Degree (Doctoral) Department of physics, University of Chemical Technology and Metallurgy, Sofia, Bulgaria. Grant agreement no. 2011-4051/002-001-EMA2 supported by the European Commission (Mediterranean Area for Science, Technology and Research, 2013). Thesis Title: Thermoelectrical Bi2Se3-Bi2Te3 Thin Films. Date of Graduation: 2016.

2- master’s degree, Major: Natural Science (Physics). Department of physics, Faculty of Science, Sohag University, Sohag, Egypt. Thesis Title: Studies on Some Physical Properties of Bismuth Selenide Compound Doped with Antimony Element, Date of Graduation: 2011.

3- bachelor’s degree, Major: Natural Science, Physics.

 

Work Experience:

 

1 – Assistant professor and Senior lecturer at National University of Science and Technology, Moscow, Russia, 2016-2018.

2 – Lecturer of Physics at Physics Department, Faculty of Science, Sohag university, Egypt, 2018-2020.

3- Associate professor, Faculty of Engineering, King Salman International University, South Sinai, Egypt, 2020 – present

 

Research Experience:

 

1. Lecturer of Physics at Department of physics, Faculty of Science, University of Sohag, Egypt, 2018-present.

2. Assistant professor and Senior lecturer at the National University of Science and Technology, Moscow, Russia, 2016-2018.

3. Researcher at Department of physics, University of Chemical Technology and Metallurgy, Sofia, Bulgaria 2013-2016.

4. Assistant Lecturer and researcher at Department of physics, Faculty of Science, University of Sohag, Sohag, Egypt 2011-2013.

5. Demonstrator of physics and researcher assistant at Department of physics, Faculty of Science, Sohag University, Sohag, Egypt 2007-2011.

 

Publications and Tops Notes  ;

 

1- Structural and magnetic properties of Dy doped SrFe12O19 ferrites, Materials Today Communications, 2023, 35, 105884. Adam, A.M. , Elshafaie, A., Ibrahim, E.M.M. https://doi.org/10.1016/j.mtcomm.2023.105884

2- Annealing effect on the thermoelectric properties of multiwall carbon nanotubes, Physica E: Low-dimensional Systems and Nanostructures 146 (2023) 115566 A.M. Adam, et al. https://doi.org/10.1016/j.physe.2022.115566

3- Structure, Thermal, and Physic-Chemical Properties of some Chalcogenide Alloys Thermal Science, 2023, 27(1), pp. 397–404. Adam, A.M., Abdel-Rehim, W.M.F., Petkov, P., Ataalla, M. https://doi.org/10.2298/TSCI221001195A

4- Electrical and thermoelectrical properties of Bi2−xNaxTe3 alloys, Journal of Alloys and Compounds 920 (2022) 165952 A.M. Adam, A.K. Diab, Medhat A. El-Hadek, Ahmed O. Sayed, E.M.M. Ibrahim. https://doi.org/10.1016/j.jallcom.2022.165952

5- Heat treatment effects on the structural and optical properties of thin Bi2(Se1-xTex)3 films, Ceramics International, 2022, 48(21), pp. 31148–31156. El-Qahtani, Z.M.H. , El-Hadek, M.A. , Alotaibi, M.F. , Petkov, P. , Adam, A.M,. https://doi.org/10.1016/j.ceramint.2022.06.189

6- Outstanding optical properties of thermally grown (Bi2Se3)1-x (Bi2Te3)x thin films, Materials Science in Semiconductor Processing 143, (2022) 106557, A.M. Adam et al. https://doi.org/10.1016/j.mssp.2022.106557

 

Dr Arely Cano | Mechanics of Functional Materials and Structures.

Published on by Mechanics Awards
Dr Arely Cano: Leading Researcher in Mechanics of Functional Materials and Structures.
Dr Arely Cano, PhD, Advanced Technology  .

Dr. Arely Cano, a distinguished PhD holder in advanced technology, stands at the forefront of groundbreaking research in the mechanics of functional materials and structures. With an illustrious career, Dr. Cano has become a trailblazer, contributing significantly to the field’s advancements. Her expertise extends across intricate realms, encompassing innovative technologies and the nuanced understanding of materials’ mechanical behavior. As a respected leader, Dr. Cano’s work not only propels the boundaries of knowledge but also inspires the next generation of researchers to delve into the fascinating intersections of technology, materials, and structure.

 

Professional Profiles:

 

 

The impact of her research is evident in citation metrics and indices from google scholar:

Cited by : All-354

citations- 342

h-index-10

 

Education:

  • PhD, Advanced Technology Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2015-12/2018 Mexico City, Mexico -Thesis: “An XPS study of Prussian blue Analogues and Related Coordination Compounds”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Luis Lartundo (SNI II) (llartundo@ipn.mx)Master’s degree, Advanced Technology Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2013-12/2014 Mexico City, Mexico -Thesis: “Study of an atypical transition metal nitroprussides”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Adela Lemus (SNI II) (alemuss@ipn.mx)Bachelor’s’ degree, Industrial Chemical Engineering Escuela Superior en Ingeniería Química e Industrias Extractivas (ESIQIE), National Polytechnic Institute 08/2008-12/2012 Mexico City, Mexico -Degree obtained with the Master´s thesis: “Study of an atypical transition metal nitroprussides”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Adela Lemus (SNI II) (alemuss@ipn.mx)

 

Synchrotron Project:

Accepted internal proposal for Beam time run September-October/2022 (1 month) Surface structure and chemical composition study of Nb for quantum materials applications: 3D and 2D resonators Author(s): A. Cano, D. Bafia, Z. Sung, M. Martinello, S. Posen, A. Romanenko, A. Grassellino and J. R. Zuazo European Synchrotron Radiation Facility, Spline Spanish beam-station, ESRF, France Contact: Beam-scientist PhD Juan R. Zuazo, Beam-scientist PhD German Castro Accepted proposal for Beam time run November/2021 (2 year)

Electronic and structural changes in Nb SRF material under cryogenic conditions through combined HAXPES/GIXRD data Author(s): A. Cano, Z. Sung, D. Bafia, T. Spina, M. Martinello, S. Posen, A. Grassellino, A. Romanenko European Synchrotron Radiation Facility, Spline Spanish beam-station, ESRF, France Contact: Beam-scientist PhD Juan R. Zuazo, Beam-scientist PhD German Castro Accepted proposal for Beam time run Feb/2021(1 year)

Tracing microstructural changes in SRF Nb-matrix under cooling/heating cycles through HighResolution XRD powder patterns analysis Author(s): A. Cano, D. Bafia, J. Lee, Z. Sung, M. Martinello, A. Romanenko Advanced Photon Source-Argonne National Laboratory, IL, USA Contact: Beam-scientist Jennia Karapetrova

 

Research Experience:

  • Postdoctoral Research Associate Fermi National Accelerator Laboratory 06/2019-Present Batavia, IL, USA Applied Physics and Superconducting Division (APS/TD) -Research Project: Surface structure and chemical composition of the near-surface of SRF cavities based on Nb and Nb3Sn Superconducting Quantum Materials and System Center (SQMS) -Research Project: Unraveling the local surface structure in 2D and 3D Nb superconducting resonators and examining its potential impact on TLS losses Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), PhD Martina Martinello (martina9@stanford.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov) and PhD. Akshay Murthy (amurthy@fnal.gov) -Design of multi-technique surface analysis platform based on X-ray photoelectron spectrometer with HeL manipulator. Supervisors:Senior Researcher Anna Grasellino (annag@fnal.gov), Senior Scientist Alexander Romanenko (aroman@fnal.gov), PhD Mattia Checchin (checchin@stanford.edu) User facilities/Postdoctoral Research Associate European Synchrotron Radiation Facilities 11/2021-10/2022 Grenoble, France Spline Spanish Beamline -Research Project: Surface structure study of Nb for quantum materials applications: 3D and 2D resonators Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), Beam-scientist PhD Juan R. Zuazo (rubio@esrf.fr), PhD Martina Martinello (martina9@stanford.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov) User facilities/Postdoctoral Research Associate Advanced Photon Source-Argonne National Laboratory 11/2020-11/2021 Lemont, IL, USA 33-BM-C -Research Project: Tracing microstructural changes in SRF Nb-matrix upon cooling/heating cycles by cryo-GI-XRD Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), Beam-scientist M. Sc. Evguenia Karapetrova (jenia@anl.gov), PhD Martina Martinello (martina9@stanford.edu), PhD Tiziana Spina (spina.tiziana@as-g.it) User facilities/ Postdoctoral Research Associate Northwestern University 07/2019-Present Evanston, IL, USA NU Atomic and Nanoscale Characterization Experimental Center (NUANCE) -Research Project: Chemical composition mapping of the inner surface of SRF cavities cutouts using Electron Spectroscopies and Microscopy Supervisors:Senior Researcher Anna Grasellino (annag@fnal.gov), PhD Martina Martinello (martina9@stanford.edu) and PhD Xinqi Chen (xchen@northwestern.edu) Integrated Molecular Structure Education and Research Center (IMSERC) -Research Project: Evaluation of the Surface structure of Nb cavities cutouts processed with state-of-the-art RF surface treatments using X-ray diffraction techniques and TG-MS Supervisors: PhD Martina Martinello (martina9@stanford.edu) and Senior Scientist Christos Malliakas (cmalliakas@northwestern.edu) User facilities/ Postdoctoral Research Associate Minnesota University 07/2021-Present Minnesota, MN, USA XPS instrument, Characterization facility, CharFac -Research Project: Thermal evolution of the native oxide layer on Nb3Sn-coated Nb SRF grade. An In-situ angular XPS study Contact: PhD Bing Luo (luox0026@umn.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov)and Senior Scientist Sam Posen (sposen@fnal.gov) Invited Researcher Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2019-06/2019 Mexico City, Mexico National Laboratory in Energy Conversion and Storage, LNCAE -Research collaboration: Mentoring of undergraduate/graduate thesis and Electron spectroscopy (XPS) trainings Contact: Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) Visiting Researcher Institute for Nuclear Research, Hungarian Academy of Sciences 02/2016-07/2016 Debrecen, Hungary Laboratory of Electron Spectroscopy and Materials Science -Research Project: XPS study of Coordination Chemistry at the Nanoparticles Surface Contact: PhD László Kövér (lkover15@gmail.com), PhD József Tóth (toth.jozsef@atomki.mta.hu) Visiting Researcher Malaga University 09/2015-12/2015 Malaga, Spain Department of Inorganic Chemistry.

    Crystallography and Mineralogy -Developed project: Systematic XPS Study of Molecular Nano-porous Materials with Potential Applications in Renewable Energy Technologies Contact: Dr. Enrique Rodríguez Castellón (castellon@uma.es) Visiting Researcher Center for Nanoscience and Micro/Nanotechnologies, National Polytechnic Institute 06/2014-06/2015 Mexico City, Mexico National Laboratory of characterization of materials and nanostructures -Developed project: Advanced training in Surface Analysis using XPS spectroscopy Contact: PhD Luis Lartundo Rojas (SNI II) (llartundo@ipn.mx) Visiting undergraduate student Research Center for Applied Chemistry, CIQA 01/2012-02/2012 Saltillo, Mexico Department of Plastic Transformation Processes -Developed project: Synthesis, characterization, and monitoring phase inversion of high impact polystyrene (HIPS). Contact: Dr. Graciela E. Morales Balado (SNI II) (graciela.morales@ciqa.edu.mx) and Dr. Florentino Soriano Corral (SNI I), (florentino.soriano@ciqa.edu.mx) Internship undergraduate student Research Center for Applied Chemistry, CIQA 01/2011-02/2011 Saltillo, Mexico Department of organometallic materials synthesis -Developed project: Morphology control of Zn-oxides nanoparticles for automotive applications Contact: Dr. Graciela E. Morales Balado (SNI II) (graciela.morales@ciqa.edu.mx), Dr. Pablo Acuna (SNI I) (pablo.acuna@ciqa.edu.mx)

 

Publications and Top Noted:

First direct observation of nanometer size hydride precipitations on Superconducting Niobium Author(s): Z-H. Sung, A. Cano, A. Murthy, E. Karapetrova, J-Y. Lee, A. Grassellino and A. Romanenko arXiv Preprint arXiv:2305.01022

Assist Prof Dr Валентина Титаренко – Mechanics of Functional and Intelligent Materials

Published on by Mechanics Awards
Assist Prof  Dr Валентина Титаренко : Leading Researcher In Mechanics of Functional and Intelligent Materials

Congradulations, Assist Prof  Dr Валентина Титаренко, on winning the esteemed  Paper Best Researcher Award Sciencefather!

Congratulations, Assist Prof  Dr Валентина Титаренко In recognition of your outstanding contributions to the field of Mechanics of Functional and Intelligent Materials, we extend our heartfelt congratulations on receiving the prestigious  Best Researcher Award by ScienceFather Your dedication to advancing knowledge in clinical Mechanics of Functional and Intelligent Materials, and the exploration of Mechanics of Functional and Intelligent Materials is truly commendable.Your commitment to excellence and tireless efforts in research have not only enriched our academic community but have also contributed significantly to the broader scientific community.

May this award serve as a testament to your exceptional skills, unwavering dedication, and the impactful influence you’ve had on your field.  We look forward to witnessing your continued success and the many more groundbreaking contributions to come.Once again, congratulations on this well-deserved achievement!

 

Professional Profiles:

Education:

She entered Dnipropetrovsk National University Department of Physics in 1999 and graduated in 2004 with a diploma in applied Physics.

She received a PhD in physical and mathematical sciences Degree from the Institute of Dnipropetrovsk National University named OlesHonchar in 2012 for the thesis “Structure and properties of metal films, produced by electroplating with external laser radiation stimulation”.

Teaching Experience:

lecturer at the department of Physics, Dnipro National University of Railway Transport named after Academician V. Lazaryan since 2007. She is the lecturer of course “Physics”.