Junhong Xu | structural control | Best Researcher Award

Assoc. Prof. Dr Junhong Xu | structural control | Best Researcher Award

 Assoc. Prof. Dr at Nanjing forestry university, China

Dr. Xu Junhong is an Associate Professor and Master Supervisor at the School of Civil Engineering, Nanjing Forestry University (2017–present). He holds a Ph.D. in Civil Engineering from Southeast University (2015) and has expertise in structural engineering, mechanical metamaterials, and vibration control. He has led numerous research projects and supervised graduate students. His academic contributions span energy dissipation technologies, additive manufacturing, and structural optimization.

Publication Profile

scopus

Education: 🎓

Ph.D. in Civil Engineering, Southeast University, 2015 M.S. in Geotechnical Engineering, Hohai University, 2010 B.A. in Civil Engineering, North China University of Water Resources and Electric Power, 2007

Experience: 🌟

Associate Professor, Nanjing Forestry University, School of Civil Engineering (2017–present) Lecturer, Hohai University (2010–2017) Extensive participation in research projects related to structural vibration control and nanocomposites

Awards and Honors: 🏅

National Natural Science Foundation of China Project Award (2025) Jiangsu Natural Science Foundation Award for Research on Viscoelastic Damping (2018–2021) Multiple recognitions for contributions to disaster prevention and engineering projects.

Research Focus: 🔬

Dr. Xu’s research interests include mechanical metamaterials, additive manufacturing, high-performance nanocomposites, and viscoelastic damping devices. His focus is on structural vibration control, particularly damping systems for steel, timber, and concrete structures. He also explores disaster prevention, mitigation, and high damping materials for energy dissipation. His work has applications in both building structures and civil engineering technologies.

Publications 📖

Dynamic performance testing of CB-990 reinforced fluororubber joint dampers (CFJD) — This study provides simulation analysis of these innovative materials for improving structural damping under dynamic loads.

Pore pressure study of calcareous sand — Examines the effects of complex loadings on calcareous sand, important for understanding soil behavior in seismic conditions.

Seismic performance of nanometakaolin-reinforced fluororubber sector dampers (NFSD) — Investigates the seismic resistance properties of these dampers, offering solutions for more resilient infrastructure.

Energy dissipation in 3D-PAM type Right-Angle Viscoelastic Dampers (RVD) — A key study on vibration control and energy dissipation, particularly for polyurethane damping materials.

Conclusion:

Based on the candidate’s impressive academic achievements, active involvement in innovative research, and contributions to improving structural safety and resilience, they are a strong contender for the Research for Best Researcher Award. Their work in the field of vibration control, damping systems, and disaster mitigation is not only timely but also impactful, addressing urgent needs in civil engineering and structural safety. If the candidate can further expand their influence through international publications and industry collaborations, their potential for making significant contributions to the field will only grow.

Ryspek Usubamatov | Mechanics | Outstanding Scientist Award

Prof. Dr. Ryspek Usubamatov | Mechanics | Outstanding Scientist Award

Prof at Kyrgyz State Technical University, Kyrgyzstan

🎓Prof. Dr. Ryspek Usubamatov, an esteemed academic and innovator, has contributed immensely to mechanical, industrial, and manufacturing engineering. 🌍 Born in Kyrgyzstan, he earned his Ph.D. at Bauman Moscow State Technical University and holds over 500 publications, 61 patents, and 8 books. 📚 He has led research projects globally, including in the USA, UK, and Malaysia, and mentored numerous students. 🌟 His groundbreaking work in gyroscopic theory and high-efficiency turbines reflects his dedication to sustainable innovation.

Publication Profile

orcid

Education🎓

1994-96: Certificate in English Literature, KSTU  1994: University Administration, Kansas University, USA.  1993: Doctor of Technical Sciences, National Academy of Sciences, Kyrgyzstan. 1968-72: Ph.D., MSTU 1960-66: Professional Engineer Certificate, Mechanical Engineering, MSTU.  Multiple certifications from workshops globally in engineering, composite materials, web publishing, and business coaching.

Experience 👨‍🏫

Professor at UniMAP and UPM (2002-2016).  Professor of Automation and Production, KSTU (1972-1992).  Rector of KSTU (1992-1999).  Director, International University of Kyrgyzstan (1999-2002). Expert consultant for UNESCO and INTAS, promoting global scientific collaboration. Machine Tool Engineer, Bishkek Engineering Plant (1966-1968).

Awards and Honors🏅

State Medal for Valiant Labour, Kyrgyzstan (1982). Government Medal for Excellence in Education, Kyrgyzstan (1993) Bronze Medal, ITEX, Malaysia (2009). Silver Medal, ITEX, Malaysia (2014). Order of Merit, WIAF, Korea (2012). Fellowships and memberships in AAAS, UAMAE, and global academies.  Editorial board member of multiple scientific journals.

Research Focus⚙️

Productivity Theory for Industrial Engineering. Gyroscopic effects for rotating objects. High-efficiency turbine designs. Advanced machining processes and CNC. Automation, robotics, and material handling. Innovations in vane-type turbines and combustion engines  Dynamic system design and kinematics of machines. Econometrics and engineering collaboration projects.

Publications 📖

ptimization of Machining for the Maximal Productivity Rate of the Drilling Operations
Journal: International Journal of Mathematics for Industry
Published: August 2024 | DOI: 10.1142/S2661335224500230
Contributors: Ryspek Usubamatov, Abdusamad Abdiraimov

Maximal Productivity Rate of Threading Machine Operations
Journal: International Journal of Mathematics for Industry
Published: July 2024 | DOI: 10.1142/S2661335224500199
Contributors: Ryspek Usubamatov, Darina Kurganova, Sarken Kapayeva

Optimization of Face Milling Operations by Maximal Productivity Rate Criterion
Journal: Production Engineering
Published: June 2024 | DOI: 10.1007/s11740-023-01249-9
Contributors: Ryspek Usubamatov, Cholpon Bayalieva, Sarken Kapayeva, Tashtanbay Sartov, Gabdyssalyk Riza

Gyroscopic Torques Generated by a Spinning Ring Torus
Journal: Advances in Mathematical Physics
Published: January 2024 | DOI: 10.1155/admp/5594607
Contributors: Ryspek Usubamatov, John Clayton

Theory of Gyroscopic Effects for Rotating Objects
Book: Springer
Published: 2022 | DOI: 10.1007/978-3-030-99213-2

Optimization of Machining by the Milling Cutter
Preprint: December 2022 | DOI: 10.21203/rs.3.rs-2333647/v1
Contributors: Ryspek Usubamatov, Cholpon Bayalieva, Sarken Kapayeva, Tashtanbay Sartov

Inertial Forces and Torques Acting on a Spinning Annulus
Journal: Advances in Mathematical Physics
Published: September 2022 | DOI: 10.1155/2022/3371936
Contributors: Ryspek Usubamatov, Sarken Kapayeva, Zine El Abiddine Fellah

Erratum: Physics of Gyroscope Nutation
Journal: AIP Advances
Published: March 2021 | DOI: 10.1063/5.0040660

Physics of Gyroscope Nutation
Journal: AIP Advances
Published: October 2019 | DOI: 10.1063/1.5099647

Productivity Theory for Industrial Engineering
Book: Taylor and Francis, London
Published: July 2018

Conclusion

This candidate is an exceptional contender for the Research for Outstanding Scientist Award, with a remarkable track record of academic excellence, professional leadership, and contributions to mechanical engineering and manufacturing technologies. Their multidisciplinary expertise, extensive publication record, and international recognition make them a strong candidate. Enhancing focus on emerging technologies and sustainability-related applications would further strengthen their candidacy and relevance for this prestigious award.

Xin Ye | TiNi-based alloy additive manufacturing | Best Researcher Award

Dr. Xin Ye | TiNi-based alloy additive manufacturing | Best Researcher Award

Lecturer at  HElectric Power Electric Equipment Co., Ltd, China

🌟 Dr. Ye Xin, a distinguished lecturer and master tutor at the School of Materials Science and Engineering, Shanghai University of Engineering Science, specializes in superalloy welding, repair, and additive manufacturing. 📚 Holding a Ph.D. in Material Processing Engineering from Shanghai Jiao Tong University, he has made significant contributions to enterprise technical support and process optimization, earning recognition for his expertise in welding and remanufacturing technologies. 🌍

Professional Profiles:

orcid

Education 🎓

Ph.D. in Material Processing Engineering from Shanghai Jiao Tong University. 📘 International Welding Engineer Certification with expertise in arc and laser welding. 📗 Specialized in numerical simulation and optimization design for high-temperature alloy processing. 📕 Master Tutor and Technical Expert supporting academic and industry initiatives.

Experience 💼

Over 8 years as a lecturer and technical lead in superalloy welding. 🔬 Presided over 1 national experimental fund, 1 local research project, and contributed to 5 national initiatives. 🏗 Led or participated in 20+ consultancy and industrial projects, showcasing transformative innovation. ✍ Published 20+ peer-reviewed SCI and EI-indexed papers.

Awards and Honors 🏅

Recipient of prestigious national and provincial research grants. 🎖 Contributor to impactful collaborative projects in materials science. 🌟 Recognized for advancing high-temperature alloy repair technologies. 🎓 Celebrated for academic excellence and industry partnerships.

Research Focus 🔍

Superalloy welding, repair, and additive manufacturing. 📈 Advanced arc and laser welding for high-performance materials. 🔧 Numerical simulation to optimize material behavior and processing. 🔬 Developing cutting-edge technologies for industry innovation.

✍️Publications Top Note :

“Influence of Surface Pretreatment of Steel Substrate on the Interfacial Microstructure and Tensile Properties of Laser Al/Steel Joints”

Materials Letters (2024-12)

Focus: Investigates how surface treatments of steel substrates affect the microstructure and tensile strength in aluminum-steel laser joints.

DOI: 10.1016/j.matlet.2024.137523

“Study on Microstructure and Thermal Cracking Sensitivity of Deposited Ti6Al4V/Inconel 718 Composites Made by Two-Wire Arc Additive Manufacturing”

Materials (2024-12-06)

Focus: Explores the microstructure and cracking behavior of Ti6Al4V/Inconel 718 composites fabricated using two-wire arc additive manufacturing.

DOI: 10.3390/ma17235989

“The Differences in Bonding Properties and Electrical, Thermal Conductivity Between the Preferred Crystallographic Orientation Interface of Cu3Sn/Cu”

Surfaces and Interfaces (2024-03)

Focus: Studies the effects of crystallographic orientation on bonding and thermal/electrical properties at Cu3Sn/Cu interfaces.

DOI: 10.1016/j.surfin.2024.104152

“The Temperature Field Prediction and Estimation of Ti-Al Alloy Twin-Wire Plasma Arc Additive Manufacturing Using a One-Dimensional Convolution Neural Network”

Applied Sciences (2024-01-12)

Focus: Develops a CNN-based model for predicting temperature fields in additive manufacturing of Ti-Al alloys.

DOI: 10.3390/app14020661

“Dynamics of Microbubbles Induced by Thermal Shock in Inconel 718 Pulsed Laser Spot Welding and Formation of Micropores After Solidification in Molten Pool”

Journal of Materials Engineering and Performance (2023-12-07)

Focus: Examines microbubble dynamics and micropore formation during thermal shock in laser welding of Inconel 718.

DOI: 10.1007/s11665-023-08975-2

“Pulsed Laser Spot Welding Thermal-Shock-Induced Microcracking of Inconel 718 Thin Sheet Alloy”

Materials (2023-05-17)

Focus: Studies the effect of thermal shock on microcracking in thin-sheet Inconel 718 alloys.

DOI: 10.3390/ma16103775

“Study of Phase Evolution Behavior of Ti6Al4V/Inconel 718 by Pulsed Laser Melting Deposition”

Materials (2023-03-18)

Focus: Analyzes phase evolution in Ti6Al4V/Inconel 718 composite materials produced via pulsed laser deposition.

DOI: 10.3390/ma16062437

“Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network”

Materials (2023-02-15)

Focus: Proposes a hybrid CNN-LSTM approach for real-time laser welding penetration monitoring.

DOI: 10.3390/ma16041614

“Heat Accumulation, Microstructure Evolution, and Stress Distribution of Ti–Al Alloy Manufactured by Twin‐Wire Plasma Arc Additive”

Advanced Engineering Materials (2022-05)

Focus: Explores heat accumulation, microstructure changes, and stress dynamics in Ti-Al alloys during twin-wire plasma arc manufacturing.

DOI: 10.1002/adem.202101151

“Effect of Weld Pool Flow and Keyhole Formation on Weld Penetration in Laser-MIG Hybrid Welding Within a Sensitive Laser Power Range”

Applied Sciences (2022-04-19)

Focus: Investigates weld penetration mechanisms during laser-MIG hybrid welding processes.

DOI: 10.3390/app12094100

Conclusion

Ye Xin’s robust academic background, extensive research contributions, and leadership in superalloy welding and additive manufacturing make him a strong candidate for the Best Researcher Award. His innovative projects and industry collaborations highlight his impact on advancing materials science. Addressing gaps in global collaboration, recognition, and intellectual property contributions could further bolster his candidacy for prestigious honors.

Yasmeen Obaidat | Structural eng | Best Researcher Award

Prof. Yasmeen Obaidat | Structural eng | Best Researcher Award

Professor at ordan university of science and technology, Jordan

Associate Professor of Civil Engineering at Jordan University of Science & Technology (JUST). 📚 Earned a Ph.D. from Lund University, Sweden (2011), and MSc/BSc from JUST. 🏗️ Expert in structural retrofitting, nonlinear finite element modeling, and AI applications in civil engineering. 🌍 Active researcher with 40+ publications and contributor to academic growth at JUST and Yarmouk University. 🎓 Dedicated mentor, supervisor, and conference participant.

 

Publication Profile

scholar

Education🎓

Ph.D.: Civil Engineering, Structural Mechanics, Lund University, Sweden (2011). Dissertation: Structural retrofitting of concrete beams using FRP Licentiate: Structural Mechanics, Lund University, Sweden (2009). Thesis: Retrofitting reinforced concrete beams with CFRP. M.Sc.: Structural Engineering, JUST, Jordan (2007). Thesis: Retrofitting RC beams with composite laminates. B.Sc.: Structural Engineering, JUST, Jordan (2004).

Experience🧑‍🏫

Professor, Civil Engineering, JUST (2023-present). Associate Professor, Civil Engineering, JUST (2012-2019). Head of Civil Engineering Department, Yarmouk University (2012-2015). Assistant Professor, Civil Engineering, JUST and Yarmouk University. Established civil engineering labs and supervised 50+ undergrad projects.

Awards and Honors🏆

Member of Undergraduate Projects Committee, Jordanian Engineers Association (2019-present).  Instrumental in academic and research partnerships nationally and internationally.  Established civil engineering labs at Yarmouk University.  Significant contributions to faculty development at JUST and Yarmouk University.

Research Focus🔍 

Structural retrofitting and strengthening with FRP materials.  Nonlinear finite element modeling in civil engineering applications. AI integration in structural engineering solutions  Climatic design for sustainable civil engineering practices.  Published 40+ peer-reviewed articles and supervised MSc/PhD students.

Publication  Top Notes

“The effect of CFRP and CFRP/concrete interface models when modelling retrofitted RC beams with FEM”
📄 Composite Structures (2010), 92(6), pp. 1391–1398.
👀 Cited 369 times, this study investigates finite element modeling (FEM) techniques for retrofitted RC beams using CFRP.

“Retrofitting of reinforced concrete beams using composite laminates”
📄 Construction and Building Materials (2011), 25(2), pp. 591–597.
🔗 Cited 202 times, this article explores composite laminate retrofitting for RC beams, focusing on structural performance.

“Retrofitting of partially damaged reinforced concrete beam-column joints using various plate-configurations of CFRP under cyclic loading”
📄 Construction and Building Materials (2019), 198, pp. 313–322.
🌐 Cited 72 times, it examines innovative CFRP configurations for seismic retrofitting of RC joints.

“Evaluation of parameters of bond action between FRP and concrete”
📄 Journal of Composites for Construction (2013), 17(5), pp. 626–635.
📊 Cited 62 times, focuses on critical bond parameters affecting FRP-concrete interaction.

“Effect of olive waste (Husk) on behavior of cement paste”
📄 Case Studies in Construction Materials (2016), 5, pp. 19–25.
🌱 Cited 58 times, investigates the sustainable use of olive waste in cement paste formulations.

“Structural retrofitting of concrete beams using FRP-debonding issues”
📄 Doctoral Dissertation (2011).
📗 Cited 54 times, addresses challenges of FRP debonding in structural retrofitting applications.

“A new technique for repairing reinforced concrete columns”
📄 Journal of Building Engineering (2020), 30, 101256.
🏗️ Cited 44 times, proposes an innovative column repair method using CFRP.

“Non-linear finite-element investigation of the parameters affecting externally-bonded FRP flexural-strengthened RC beams”
📄 Results in Engineering (2020), 8, 100168.
🖥️ Cited 42 times, presents a FEM analysis for flexural strengthening of RC beams.

“New anchorage technique for NSM-CFRP flexural strengthened RC beam using steel clamped end plate”
📄 Construction and Building Materials (2020), 263, 120246.
🚧 Cited 40 times, this work details advanced anchorage solutions for NSM-CFRP systems.

“Performance of RC beam strengthened with NSM-CFRP strip under pure torsion: Experimental and numerical study”
📄 International Journal of Civil Engineering (2020), 18, pp. 585–593.
🔄 Cited 38 times, investigates the torsional strengthening of RC beams using NSM-CFRP strips.

“Shear strengthening of RC beams using near-surface mounted carbon fibre-reinforced polymers”
📄 Australian Journal of Structural Engineering (2019), 20(1), pp. 54–62.
✂️ Cited 38 times, explores NSM-CFRP applications for shear strength enhancement.

“Compressive strength prediction of lightweight short columns at elevated temperature using gene expression programming and artificial neural network”
📄 Journal of Civil Engineering and Management (2020), 26(2), pp. 189–199.
🔥 Cited 27 times, uses AI to predict structural performance under heat stress.

“Case study on production of self-compacting concrete using white cement by-pass dust”
📄 Case Studies in Construction Materials (2018), 9, e00190.
🔍 Cited 27 times, highlights sustainable concrete production methods.

“Effect of aggregate size on the bond behavior between carbon fiber–reinforced polymer sheets and concrete”
📄 Journal of Materials in Civil Engineering (2019), 31(12), 04019295.
📐 Cited 24 times, examines how aggregate size impacts CFRP-concrete bond behavior.

“Effect of elevated temperature on the bond behavior between NSM-CFRP strips and recycled aggregate concrete”
📄 Construction and Building Materials (2020), 251, 118970.
🌡️ Cited 22 times, investigates bond integrity under heat exposure.

“Behavior of NSM CFRP reinforced concrete columns: Experimental and analytical work”
📄 Case Studies in Construction Materials (2021), 15, e00589.
🏗️ Cited 21 times, combines experimental and analytical approaches to column strengthening.

“A nonlinear finite element model for shear deficient heat-damaged concrete beams repaired using NSM CFRP strips”
📄 Construction and Building Materials (2018), 170, pp. 314–325.
🔨 Cited 21 times, provides a FEM-based solution for repairing heat-damaged beams.

“Repair of heat-damaged SCC cantilever beams using SNSM CFRP strips”
📄 Structures (2020), 24, pp. 151–162.
🔧 Cited 20 times, focuses on repairing SCC beams using advanced CFRP techniques.

“Innovative strengthening schemes of concrete cantilever beams using CFRP sheets: End anchorage effect”
📄 Construction and Building Materials (2018), 190, pp. 1215–1225.
💡 Cited 17 times, analyzes the end anchorage impact in CFRP-strengthened beams.

Conclusion

The candidate demonstrates exceptional qualifications and achievements in structural mechanics, retrofitting techniques, and civil engineering education. Their blend of academic excellence, research productivity, leadership roles, and mentorship makes them a strong contender for the Best Researcher Award. By focusing on enhancing global impact and diversifying research interests, they can further solidify their stature as a leading researcher.

JAEHYUK CHOI | Materials and Structures | Best Researcher Award

Mr. JAEHYUK CHOI | Materials and Structures | Best Researcher Award

Assist Prof Dr at National Korea Maritime and Ocean University, South Korea

Mr. JAEHYUK CHOI is a distinguished professor at Korea Maritime and Ocean University with expertise in mechanical and marine engineering. After earning his Ph.D. from Hokkaido University, Japan, he has contributed significantly to fields like combustion engineering, high-temperature hydrogen production, and space utilization engineering. His professional journey includes a blend of academia, research, and industry advisory roles, including postdoctoral work at the Korea Atomic Energy Research Institute and advisory roles for Korea’s Ministry of Ocean and Fisheries. He has published extensively on air pollution control and hydrogen production modeling, contributing to global research initiatives.

Publication Profile

scopus

Education 🎓

Ph.D. in Mechanical Science (2005) – Hokkaido University, Japan (Advisor: Prof. Osamu Fujita) M.S. in Marine Engineering (2000) – Korea Maritime University, Korea (Advisor: Prof. Seok-Hun Yoon) B.S. in Marine Engineering (1996) – Korea Maritime University, Korea His educational journey has provided him with a robust foundation in mechanical and marine engineering, focused on areas such as combustion, fluid flow, and hydrogen production. The combination of Japanese and Korean maritime expertise enables him to develop cutting-edge models for air pollution control, combustion technologies, and high-temperature electrolysis, contributing to cleaner maritime operations. 🌐🌬️🚢

Experience 👨‍✈️

Naval Officer – 1996-1998 (Navy R.O.T.C 41, Korea) Researcher – 2000-2001 (Korea Maritime University) Research Student – 2001 (Hokkaido University, Japan Postdoctoral Researcher – 2005-2007 (Korea Atomic Energy Research Institute)  BK21 Assistant Professor – 2007-2009 (Seoul National University)  Assistant/Associate/Professor – 2009-present (Korea Maritime and Ocean University) Policy Advisory Council – 2017-2019 (Ministry of Ocean and Fisheries)  Visiting Scholar – 2019-2021 (University of Missouri) Mr. JAEHYUK CHOI has a rich professional background combining military service, academic research, and advisory roles. His international experience includes collaborations in Japan and the United States, broadening his expertise in nuclear hydrogen and marine engineering. 🛠️🌍

Awards and Honors🏆

Minister Citation – Ministry of Ocean and Fisheries (2018) Best Teacher Award – Korea Maritime and Ocean University (2014, 2017) 2000 Outstanding Intellectuals – IBC (2016) Minister Citation – Ministry of Science, ICT, and Future Planning (2015) Certificate – President of KMOU (2013, 2014) Outstanding Paper – Japan Society of Mechanical Engineers (2007 Outstanding Paper – Korean Society of Marine Engineering (2006 Certificate – Korea Atomic Energy Research Institute (2006) Mr. JAEHYUK CHOI has received numerous awards, recognizing his contributions to marine engineering and academia. His dedication to research and teaching is reflected in prestigious ministerial citations and multiple best paper awards from renowned engineering societies. 🏅📚🎖️

Publication  Top Notes

Experimental and numerical studies on performance investigation of a diesel engine converted to run on LPG
Authors: Kuk Kim, J., Lee, W.-J., Ahn, E., Choi, J.-H.
Published in: Energy Conversion and Management, 2024, 321, 119091
Summary: This paper investigates the performance of diesel engines converted to operate on LPG (liquefied petroleum gas). The study combines both experimental and numerical methods to analyze fuel efficiency, emissions, and engine performance.

Review of noise and vibration reduction technologies in marine machinery: Operational insights and engineering experience
Authors: Park, M.-H., Yeo, S., Choi, J.-H., Lee, W.-J.
Published in: Applied Ocean Research, 2024, 152, 104195
Summary: This review focuses on technologies aimed at reducing noise and vibration in marine machinery. The authors compile operational insights and lessons learned from engineering practices, emphasizing the importance of reducing environmental and human impacts in maritime applications.

Experimental evaluation of the significance of scheduled turbocharger reconditioning on marine diesel engine efficiency and exhaust gas emissions
Authors: Nyongesa, A.J., Park, M.-H., Lee, C.-M., Hur, J.-J., Lee, W.-J.
Published in: Ain Shams Engineering Journal, 2024, 15(8), 102845
Summary: This article presents an experimental study evaluating the impact of scheduled turbocharger reconditioning on the efficiency of marine diesel engines and associated exhaust gas emissions. The findings emphasize the importance of maintenance schedules for optimizing engine performance and reducing emissions.

Effects of natural gas admission location and timing on performance and emissions characteristics of LPDF two-stroke engine at low load
Authors: Nyongesa, A.J., Choi, J.-H., Lee, J.-W., Kim, J.-S., Lee, W.-J.
Published in: Case Studies in Thermal Engineering, 2024, 56, 104241
Summary: This paper investigates the effects of natural gas admission timing and location on the performance and emissions of low-pressure dual-fuel (LPDF) two-stroke engines. The results are crucial for optimizing engine operations under low-load conditions.

Estimation of greenhouse gas emissions from ships registered in South Korea based on activity data using the bottom-up approach
Authors: Yeo, S., Kuk Kim, J., Choi, J.-H., Lee, W.-J.
Published in: Journal of Engineering for the Maritime Environment, 2024
Summary: This study uses a bottom-up approach to estimate greenhouse gas emissions from ships registered in South Korea. The authors focus on activity data, providing a detailed methodology for assessing emissions from maritime transportation.

LPG, Gasoline, and Diesel Engines for Small Marine Vessels: A Comparative Analysis of Eco-Friendliness and Economic Feasibility
Authors: Kim, J.K., Yeo, S., Choi, J.-H., Lee, W.-J.
Published in: Energies, 2024, 17(2), 450
Summary: This article compares LPG, gasoline, and diesel engines for small marine vessels, focusing on their eco-friendliness and economic feasibility. The paper highlights LPG as a potential environmentally friendly alternative to traditional fuels.

Impact of K-H Instability on NO Emissions in N₂O Thermal Decomposition Using Premixed CH₄ Co-Flow Flames and Electric Furnace
Authors: Park, J., Kim, S., Yu, S., Choi, J.-H., Yoon, S.H.
Published in: Energies, 2024, 17(1), 96
Summary: This study examines the impact of Kelvin-Helmholtz (K-H) instability on nitrogen oxide (NO) emissions during nitrous oxide (N₂O) thermal decomposition in premixed methane co-flow flames. The findings contribute to understanding combustion instability’s role in emission characteristics.

Feasibility study on bio-heavy fuel as an alternative for marine fuel
Authors: Kim, J.-S., Choi, J.-H.
Published in: Renewable Energy, 2023, 219, 119543
Summary: This feasibility study explores the potential of bio-heavy fuel as a sustainable alternative to conventional marine fuels. The paper assesses the environmental and economic impacts of using bio-heavy fuel in maritime applications.

Corrigendum: Effects of hydrogen mixture ratio and scavenging air temperature on combustion and emission characteristics of a 2-stroke marine engine
Authors: Pham, V.C., Kim, J.-S., Lee, W.-J., Choi, J.-H.
Published in: Energy Reports, 2023, 9
Summary: The corrigendum addresses errors in a previously published article related to hydrogen mixture ratios and scavenging air temperature’s effects on two-stroke marine engine performance and emissions.

Effects of hydrogen mixture ratio and scavenging air temperature on combustion and emission characteristics of a 2-stroke marine engine
Authors: Pham, V.C., Kim, J.-S., Lee, W.-J., Choi, J.-H.
Published in: Energy Reports, 2023, 9, pp. 195–216

Conclusion

The candidate is highly suitable for the Best Researcher Award due to their comprehensive expertise, significant professional experience, and numerous accolades. Their research has substantial implications for environmental sustainability and technological advancement. By focusing on improving their publication output and fostering industry collaborations, the candidate can further solidify their impact and leadership in their field. Overall, the candidate’s strengths make them an exemplary choice for this prestigious award.

Jianzhi Li | Fiber sensing | Best Researcher Award

Prof. Jianzhi Li | Fiber sensing | Best Researcher Award

 professor at Shijiazhuang Tiedao University,  china

Jianzhi Li is a Professor at the Key Laboratory of Structural Health Monitoring and Control, Shijiazhuang Tiedao University, specializing in fiber sensing technology and structural health monitoring. 🌉 She earned her Ph.D. from Beijing Jiaotong University and later held an academic post at Osaka University, Japan. 🚄 Her work focuses on enhancing railway infrastructure safety through innovative sensing techniques. 📚 Jianzhi has published numerous SCI papers and authored several books. 🚀 Her groundbreaking contributions in the field have earned her multiple awards, cementing her status as a leading researcher in fiber optics and structural health.

Publication Profile

orcid

Education 🎓

Jianzhi Li earned her Ph.D. in Structural Diagnosis and Optimization from Beijing Jiaotong University in 2009. 📚 Her doctoral studies focused on identifying and solving complex structural challenges in engineering. 🌏 She further broadened her academic horizons by serving as an Associate Professor at Osaka University in Japan between 2014 and 2015. 🏛️ This role allowed her to collaborate internationally and enhance her expertise in fiber optic sensing technology. ✨ Throughout her education, she gained deep insights into the intersections of structural health and smart material technologies, which now form the cornerstone of her research endeavors.

Experience 🏢 

Jianzhi Li currently serves as a Professor at Shijiazhuang Tiedao University’s Key Laboratory of Structural Health Monitoring and Control. 🚇 She has led several high-impact projects, particularly in fiber optic sensing and structural health monitoring for railways and bridges. 🌉 During 2014–2015, she was an Associate Professor at Osaka University, contributing to international collaborations. 📊 With over 20 patents to her name and numerous published works in prestigious journals, her experience spans industry-relevant research and cutting-edge academic advancements. 💼 She also leads the China National Key Research and Development Program, contributing to the enhancement of railway infrastructure safety.

Awards and Honors  🏆

Jianzhi Li has received numerous awards, including the First Prize for Technological Invention in Hebei Province. 🌟 She was recognized with the “Best Paper” award at the 6th International Conference on Optoelectronic Sensing. 🎖️ Her outstanding research contributions have earned her prestigious honors such as the Hebei Outstanding Youth Talent Award and a place in the Hebei 333 Talent Program. 📜 She has authored three books, including an internationally recognized English-language textbook, and her innovative work in fiber sensing and structural health has placed her among the top researchers in China. 🌍 Her membership in the Chinese Optical Society and other professional groups reflects her impact on the scientific community.

Research Focus🔬

Jianzhi Li’s research is centered on fiber optic sensing technologies and structural health monitoring. 🚇 Her work addresses critical infrastructure challenges, including heavy-duty railway bridges and roadbeds. 🔧 She has been instrumental in advancing fiber-based sensing systems for monitoring railway hazards and enhancing safety through predictive detection. 🛰️ Her research extends to smart materials and their applications in dynamic environments, focusing on the early detection of structural anomalies. 🚀 Jianzhi’s contributions are practical and forward-looking, pushing the boundaries of electromagnetic and optical sensing in engineering, leading to the development of more robust and resilient civil structures.

Publication  Top Notes

Evaluation of Concrete Carbonation Based on a Fiber Bragg Grating Sensor
📅 Published: December 2023
📰 Journal: Micromachines
🌐 DOI: 10.3390/mi15010029
Contributors: Jianzhi Li, Haiqun Yang, Handong Wu

This paper introduces a novel approach for monitoring concrete carbonation using Fiber Bragg Grating (FBG) sensors, a crucial method for assessing structural durability.

A Long-Term Monitoring Method of Corrosion Damage of Prestressed Anchor Cable
📅 Published: March 2023
📰 Journal: Micromachines
🌐 DOI: 10.3390/mi14040799
Contributors: Jianzhi Li, Chen Wang, Yiyao Zhao

This research presents a long-term monitoring technique for detecting corrosion in prestressed anchor cables, improving infrastructure safety and longevity.

A Combined Positioning Method Used for Identification of Concrete Cracks
📅 Published: November 2021
📰 Journal: Micromachines
🌐 DOI: 10.3390/mi12121479
Contributors: Jianzhi Li, Bohao Shen, Junjie Wang

This paper discusses a hybrid method for accurately identifying concrete cracks, advancing structural health monitoring.

A Spiral Distributed Monitoring Method for Steel Rebar Corrosion
📅 Published: November 2021
📰 Journal: Micromachines
🌐 DOI: 10.3390/mi12121451
Contributors: Jianzhi Li, Yiyao Zhao, Junjie Wang

Conclusion

Professor Jianzhi Li stands out as a strong candidate for the Best Researcher Award due to her exemplary research contributions, innovative spirit, and recognized leadership in the field of fiber sensing and structural health monitoring. Her achievements reflect not only her commitment to advancing science and technology but also her potential to further influence the field. With targeted improvements in professional engagement and industry collaboration, she could amplify her impact even more.

Muhammad Sami Ullah | Civil Engineering | Best Researcher Award

Mr. Muhammad Sami Ullah | Civil Engineering | Best Researcher Award

Student at Southeast University,  China

An accomplished Structural Engineer with 3.5+ years of experience across diverse projects in the U.S., U.K., and China. Specializing in advanced structural design, analysis, and optimization, they have honed their technical skills using software like SAP2000, STAAD Pro, and Tekla Tedds. Their international exposure includes remote work and internships with industry leaders in engineering. Known for attention to detail, problem-solving, and meeting tight deadlines, they excel at delivering safe, efficient, and cost-effective structural solutions. A dynamic engineer committed to driving excellence in both residential and commercial projects.

Publication Profile

orcid

Education  🎓

Master of Science in Civil Engineering (2022–2025), Southeast University, China (83%).  Bachelor of Science in Civil Engineering (2017–2021), The University of Faisalabad, Pakistan (CGPA 3.59/4.00) The Master’s thesis focused on “Load-path and strut-and-tie modeling of multiple-pile caps in bridges,” with notable research contributions published in the Structural Concrete Journal. The Bachelor’s thesis investigated the “Effect of Different Types of Superplasticizer on Properties of Fresh and Hardened Concrete.” Their academic journey blends practical projects with innovative research, culminating in an advanced understanding of structural engineering’s principles and applications.

Experience  🔧

Structural Engineer at Foresight (USA): Designed complex structural systems and analyzed steel elements using SAP2000.  Structural Engineer at Revite (UK): Specialized in advanced steel structure design and trained staff in SAP2000, STAAD Pro, and Tekla Tedds.  AGC (UK): Focused on designing timber structures, including lofts and skylights, ensuring compliance with BS and EC standards.  Internships in China: Contributed to the design of stadium structures, gaining experience with tools like ABAQUS and ANSYS  Previous roles include projects in Pakistan, optimizing material quantities and monitoring on-site construction.

Awards and Honors 🏆

Published research in Structural Concrete Journal and presented a conference paper at GBCESC 2024, China. Achieved an 83% score in the MSc program at Southeast University, China.  Winner of the Eassy Contest for International Students in Jiangsu Province. Recognized in the AutoCAD Competition at UET Faisalabad.  Represented The University of Faisalabad in Badminton tournaments. Participated in research on international students’ perceptions of the Belt and Road Initiative.

Research Focus  🔬

Their research primarily focuses on structural load-path analysis and the development of advanced strut-and-tie models for bridges. They have published work analyzing transverse tensile stresses in multiple-pile caps in Structural Concrete Journal. Ongoing projects include enhancing the design of multi-pile caps for better structural efficiency and sustainability. Additionally, they have contributed to research on the effects of superplasticizers in concrete, optimizing both fresh and hardened concrete properties for construction projects. Their research integrates advanced modeling techniques with practical applications, ensuring high-performance structural designs.

Publication  Top Notes

  • Protection-Enhanced Watermarking Scheme Combined With Non-Linear Systems
    Journal: IEEE Access, 2023
    Contributors: Hira Nazir, Muhammad Sami Ullah, Syed Salman Qadri, Humaira Arshad, Mujtaba Husnain, Abdul Razzaq, Syed Ali Nawaz
    This article introduces a watermarking scheme designed to enhance protection through non-linear systems.
  • A Color Image Encryption Scheme Combining Hyperchaos and Genetic Codes
    Journal: IEEE Access, 2022
    Contributors: Hira Nazir, Imran Sarwar Bajwa, Saima Abdullah, Rafaqut Kazmi, Muhammad Samiullah
    It explores a color image encryption model that combines hyperchaos and genetic codes for enhanced security.
  • Chaos-Based Cryptographic Mechanism for Smart Healthcare IoT Systems
    Journal: Computers, Materials & Continua, 2022
    Contributors: Muhammad Sami Ullah
    This paper presents a chaos-based cryptographic system for secure communication in smart healthcare IoT networks.
  • Hyperchaos and MD5 Based Efficient Color Image Cipher
    Journal: Computers, Materials & Continua, 2022
    Contributors: Muhammad Sami Ullah
    This article focuses on a cipher for color image encryption using hyperchaos and the MD5 algorithm for increased security.
  • Robust Secure Color Image Watermarking Using 4D Hyperchaotic System, DWT, HbD, and SVD Based on Improved FOA Algorithm
    Journal: Security and Communication Networks, 2021
    Contributors: Hira Nazir, Imran Sarwar Bajwa, Muhammad Samiullah, Waheed Anwar, Muhammad Moosa, Manjit Kaur
    It offers a robust color image watermarking technique utilizing a 4D hyperchaotic system.
  • An Image Encryption Scheme Based on DNA Computing and Multiple Chaotic Systems
    Journal: IEEE Access, 2020
    Contributors: Muhammad Samiullah, Waqar Aslam, Hira Nazir, M. Ikramullah Lali, Basit Shahzad, Muhammad Rafiq Mufti, Humaira Afzal

Conclusion:

The candidate is highly suitable for the Best Researcher Award due to their robust combination of technical expertise, strong academic performance, and contributions to structural design research. With a proven ability to lead and innovate in the field of civil engineering, particularly in the areas of steel and timber structure design, the candidate’s global experience and commitment to research excellence make them an ideal contender for such an award. Focusing on industry impact and expanding research into emerging civil engineering technologies would further enhance their candidacy.

Md Atiqur Rahman | Heat transfer | Best Researcher Award

Assoc Dr.  Vignan’s Foundation for Science, Technology & Research (Deemed to be University), india

The user has a strong academic background with a Ph.D. (submitted) from Birla Institute of Technology, Mesra, and an M.Tech from Visvesvaraya Technological University, Belgaum. With 3.5 years of experience, they have served as a Lecturer at M.V.J Polytechnic, Bangalore, an Assistant Professor at Sri Venkatesh Perumal College of Engineering & Technology, Puttur, and a Guest Lecturer at BIT University Polytechnic, Mesra. Currently, they are an Assistant Professor at Vignan’s Foundation for Science, Technology & Research (Deemed to be University), Guntur, where they aim to leverage their skills and experience to foster academic excellence and contribute to the success of their students.

 

Professional Profiles:

🎯 Career Objective:

I aim to build a successful career by working with committed and dedicated professionals. My goal is to achieve a challenging position in the field of education where I can utilize my skills and experience to help students make significant improvements in their academic performance.

🎓 Educational Qualifications:

(Ph.D): Birla Institute of Technology, Mesra (BIT, Mesra) – SubmittedM.Tech: Visvesvaraya Technological University (V.T.U.), Belgaum – B T L I T M, Bangalore – First ClassB.E: Visvesvaraya Technological University (V.T.U.), Belgaum – R.E.C Bhalki, Karnataka – First Class

👨‍🏫 Work Experience 

Lecturer at M.V.J Polytechnic, Bangalore – June 2011 to Feb 2014Assistant Professor at Sri Venkatesh Perumal College of Engineering & Technology, Puttur – June 2016 to April 2017Guest Lecturer at BIT University Polytechnic, Mesra – Jan 2018 to Aug 2020Assistant Professor at Vignan’s Foundation for Science, Technology & Research (Deemed to be University), Guntur – June 2024 to Present

Strengths for the Award

  1. Solid Educational Foundation: The individual has a strong academic background with a Ph.D. (submitted) from Birla Institute of Technology, Mesra, and an M.Tech from Visvesvaraya Technological University (V.T.U.), both highly regarded institutions in India. This indicates a solid foundation in their field of expertise.
  2. Diverse Teaching Experience: With 3.5 years of work experience across various institutions, the candidate has demonstrated versatility and dedication to education. Their roles have ranged from Lecturer to Assistant Professor, which highlights their ability to engage with students at different levels of higher education.
  3. Focus on Education and Student Improvement: The career objective emphasizes a commitment to helping students achieve academic success, which aligns with the responsibilities of an educator and researcher. This dedication to student improvement is a key strength, especially in the context of research that can directly impact educational outcomes.
  4. Research Contributions: Although specific research publications are not listed, the individual’s academic journey, culminating in a Ph.D., suggests active involvement in research. Their experiences at institutions like BIT, Mesra, likely involve significant research contributions that could make them a strong candidate for the award.

Areas for Improvement

  1. Research Publications and Impact: To strengthen their candidacy, it would be beneficial for the individual to highlight specific research contributions, including publications in reputable journals, conference presentations, or patents. Quantifying the impact of their research through citations or practical applications would further enhance their profile.
  2. Leadership and Collaboration: While the individual has teaching experience, demonstrating leadership in research projects or collaborations with other researchers could further solidify their standing as a top researcher. Participation in or leading interdisciplinary research projects could also be a valuable addition to their resume.
  3. Visibility and Outreach: Increasing their visibility within the academic community through conference presentations, workshops, or guest lectures could enhance their reputation as a researcher. Additionally, outreach activities, such as mentoring students in research, could showcase their ability to inspire and lead future researchers.

 

✍️Publications Top Note :

Thermo-fluid performance of a heat exchanger with a novel perforated flow deflector type conical baffles

Authors: Rahman, M.A., Dhiman, S.K.

Journal: Journal of Thermal Engineering

Year: 2024

Volume: 10

Issue: 4

Pages: 868–879

Citations: 0

Thermal hydraulic performance of a tubular heat exchanger with in-line perforated baffle with shutter type saw tooth turbulator

Author: Rahman, M.A.

Journal: Heat Transfer

Year: 2024

Volume: 53

Issue: 5

Pages: 2234–2256

Citations: 2

Assessment of improving heat exchanger thermal performance through implementation of swirling flow technology

Authors: Rahman, M.A., Hasnain, S.M.M., Zairov, R.

Journal: International Journal of Thermofluids

Year: 2024

Volume: 22

Article ID: 100689

Citations: 1

Access: Open access

The effect of triangular shutter type flow deflector perforated baffle plate on the thermofluid performance of a heat exchanger

Author: Rahman, M.A.

Journal: Heat Transfer

Year: 2024

Volume: 53

Issue: 2

Pages: 939–956

Citations: 5

The influence of geometrical and operational parameters on thermofluid performance of discontinuous colonial self-swirl-inducing baffle plate in a tubular heat exchanger

Author: Rahman, M.A.

Journal: Heat Transfer

Year: 2024

Volume: 53

Issue: 2

Pages: 328–345

Citations: 6

Enhancing heat exchanger performance with perforated/non-perforated flow modulators generating continuous/discontinuous swirl flow: A comprehensive review

Authors: Rahman, M.A., Hasnain, S.M.M.

Journal: Heat Transfer

Year: 2024

Status: Article in Press

Citations: 0

Access: Open access

Study the effect of axially perforated baffle plate with multiple opposite-oriented trapezoidal flow deflectors in an air–water tubular heat exchanger

Author: Rahman, M.A.

Journal: World Journal of Engineering

Year: 2024

Status: Article in Press

Citations: 3

THERMO-FLUID PERFORMANCE COMPARISON OF AN IN-LINE PERFORATED BAFFLE WITH OPPOSITELY ORIENTED RECTANGULAR-WING STRUCTURE IN TURBULENT HEAT EXCHANGER

Author: Rahman, A.

Journal: International Journal of Fluid Mechanics Research

Year: 2024

Volume: 51

Issue: 1

Pages: 15–30

Citations: 5

Performance evaluation of turbulent circular heat exchanger with a novel flow deflector-type baffle plate

Authors: Rahman, M.A., Dhiman, S.K.

Journal: Journal of Engineering Research (Kuwait)

Year: 2024

Article ID: 100105

Citations: 13

Status: Article in Press

Access: Open access

Experimental Investigations on Single-Phase Heat Transfer Enhancement in an Air-To-Water Heat Exchanger with Rectangular Perforated Flow Deflector Baffle Plate

Author: Rahman, M.A.

Journal: International Journal of Thermodynamics

Year: 2023

Volume: 26

Issue: 4

Pages: 31–39

Citations: 10

Conclusion

The individual appears to be a strong candidate for a “Best Researcher Award,” particularly if they can showcase specific research achievements and contributions to their field. Their educational background, coupled with diverse teaching experience, positions them well for recognition. However, to maximize their chances, they should focus on highlighting their research impact, demonstrating leadership in their field, and increasing their visibility within the academic community.

Morteza Akbari | Structural Control | Best Researcher Award

Mr. Gdańsk University of Technology, Poland

Morteza Akbari is a PhD student in Structural Engineering at Gdańsk University of Technology, Poland, specializing in structural control, earthquake engineering, and soil-structure interaction. He holds an MSc in Structural Engineering from Islamic Azad University, Iran, with a thesis on seismic control of tall buildings using semi-active friction tuned mass dampers. Morteza has published several journal and conference papers on advanced seismic control strategies, focusing on the reliability and optimization of structural control devices in buildings. His professional experience includes technical inspection roles in construction, and he has served as a reviewer for academic journals.

 

Professional Profiles:

scopus

🎓 Education

PhD Student: Structural Engineering, Gdańsk University of Technology, PolandThesis: Optimal design of structural control devices in buildings, including soil-structure interactionSupervisor: Prof. Robert JankowskiDuration: 2023-2027MSc. Structural Engineering: Islamic Azad University, Zahedan Branch, IranGPA: 15.82/20Thesis: Seismic Control of Tall Buildings Equipped with Semi-Active Friction Tuned Mass Damper Including Soil-Structure InteractionSupervisor: Dr. Sadegh EtedaliDuration: 2013-2016B.S. Civil Technology Engineering: Islamic Azad University, Birjand Branch, IranGPA: 16.24/20Duration: 2011-2013A.D. in Building General Works: Ibn Hossam Technical and Vocational University, Birjand, IranGPA: 14.39/20Duration: 2008-2010

🏅 Honor & Award

2016: Graded as an excellent thesis with a GPA of 4/4 (MSc) (18.5/20) Here’s a revised version of the content with headings and emojis to make it more engaging:

🎓 Education

PhD Student: Structural Engineering, Gdańsk University of Technology, PolandThesis: Optimal design of structural control devices in buildings, including soil-structure interactionSupervisor: Prof. Robert JankowskiDuration: 2023-2027MSc. Structural Engineering: Islamic Azad University, Zahedan Branch, IranGPA: 15.82/20Thesis: Seismic Control of Tall Buildings Equipped with Semi-Active Friction Tuned Mass Damper Including Soil-Structure InteractionSupervisor: Dr. Sadegh EtedaliDuration: 2013-2016B.S. Civil Technology Engineering: Islamic Azad University, Birjand Branch, IranGPA: 16.24/20Duration: 2011-2013A.D. in Building General Works: Ibn Hossam Technical and Vocational University, Birjand, IranGPA: 14.39/20Duration: 2008-2010

💼 Field of Interest

Structural ControlStructural ReliabilityEarthquake EngineeringSoil-Structure InteractionMachine Learning (ML)Finite Element Method

🛠️ Professional Skills

Engineering Software and Programming Languages:

MATLAB & SimulinkSeismoSignalAUTO CAD

Other Skills:

Microsoft Office

🏅 Honor & Award

2016: Graded as an excellent thesis with a GPA of 4/4 (MSc) (18.5/20)

🌐 Experience

Technical Inspector: Ready-mixed concrete company and construction company, Birjand and Mashhad, Iran (Full-time, 2017-2022)Surveyor: Housing foundation office and document registration office, Birjand, Iran (Part-time, 2017-2021)

✍️ Refereeing Experience

Reviewer: Structures Journal, Elsevier (2023-2024)Reviewer: Results in Engineering, Elsevier (2023-2024)

Strengths for the Award:

  1. Strong Academic Background:
    • Morteza Akbari is currently pursuing a PhD in Structural Engineering at Gdańsk University of Technology, with a focus on the optimal design of structural control devices in buildings, including soil-structure interaction. His academic journey also includes an MSc in Structural Engineering and a BSc in Civil Technology Engineering, demonstrating a solid foundation in the field.
  2. Specialization in Seismic Control and Soil-Structure Interaction:
    • His research work is deeply rooted in seismic control strategies, which is a critical area in structural engineering, particularly for earthquake-prone regions. His focus on soil-structure interaction further emphasizes his understanding of complex dynamics in structural design.
  3. Notable Publications:
    • Akbari has several publications in reputable journals, including Geomechanics and Engineering, Soil Dynamics and Earthquake Engineering, and the Journal of Earthquake and Tsunami. His research covers important topics such as friction-tuned mass dampers, failure probability in tall buildings, and advanced seismic control strategies.
  4. Collaborations with Renowned Researchers:
    • His work with respected supervisors like Prof. Robert Jankowski and Dr. Sadegh Etedali adds credibility to his research. Collaborating with leading experts in the field strengthens his profile as a researcher.
  5. Recognition and Awards:
    • Grading of his MSc thesis as excellent and his experience as a reviewer for journals like Structures and Results in Engineering demonstrate his academic rigor and recognition within the research community.
  6. Relevant Skill Set:
    • Proficiency in engineering software like MATLAB, Simulink, and SeismoSignal, as well as experience with programming languages, makes him technically adept in his research domain.

Areas for Improvement:

  1. Broader Impact of Research:
    • While Akbari’s research is specialized and impactful within structural control and seismic mitigation, expanding the scope to include more interdisciplinary applications or real-world case studies could enhance the broader relevance and applicability of his work.
  2. International Exposure and Collaborations:
    • Increasing international collaborations and exposure through conferences, joint research projects, or partnerships with global research institutions could further elevate his profile.
  3. Publication in High-Impact Journals:
    • While his current publications are impressive, targeting more high-impact journals in civil engineering or structural dynamics could increase the visibility and citation of his work.
  4. Diversification of Research Topics:
    • Exploring additional areas within structural engineering or integrating emerging technologies like AI and machine learning into his research could provide new insights and innovations.

 

 

✍️Publications Top Note :

. Advanced Seismic Control Strategies for Smart Base Isolation Buildings Utilizing Active Tendon and MR Dampers

Authors: Akbari, M., Zand, J.P., Falborski, T., Jankowski, R.

Journal: Engineering Structures

Publication Year: 2024

Volume: 318

Article ID: 118756

2. A New Seismic Control Framework of Optimal PIλDµ Controller Series with Fuzzy PD Controller Including Soil-Structure Interaction

Authors: Etedali, S., Zamani, A.-A., Akbari, M., Seifi, M.

Journal: Journal of the Franklin Institute

Publication Year: 2023

Volume: 360

Issue: 14

Pages: 10536–10563

Citations: 4

3. Friction Tuned Mass Dampers in Seismic-Excited High-Rise Buildings with SSI Effects: A Reliability Assessment

Authors: Etedali, S., Akbari, M., Seifi, M.

Journal: Journal of Earthquake and Tsunami

Publication Year: 2023

Volume: 17

Issue: 2

Article ID: 2250022

Citations: 7

4. Failure Probability of Tall Buildings with TMD in the Presence of Structural, Seismic, and Soil Uncertainties

Authors: Etedali, S., Seifi, M., Akbari, M.

Journal: Structural Engineering and Mechanics

Publication Year: 2023

Volume: 85

Issue: 3

Pages: 381–391

Citations: 2

5. MOCS-Based Optimum Design of TMD and FTMD for Tall Buildings Under Near-Field Earthquakes Including SSI Effects

Authors: Etedali, S., Akbari, M., Seifi, M.

Journal: Soil Dynamics and Earthquake Engineering

Publication Year: 2019

Volume: 119

Pages: 36–50

Citations: 52

6. A Numerical Study on Optimal FTMD Parameters Considering Soil-Structure Interaction Effects

Authors: Etedali, S., Seifi, M., Akbari, M.

Journal: Geomechanics and Engineering

Publication Year: 2018

Volume: 16

Issue: 5

Pages: 527–538

Citations: 12

Conclusion:

Morteza Akbari’s academic achievements, specialized research in seismic control and soil-structure interaction, and his solid publication record make him a strong contender for the Best Researcher Award. His work addresses critical challenges in structural engineering, particularly in enhancing the safety and resilience of buildings against seismic activities. By expanding his research’s broader impact and increasing his international collaborations, Akbari can further solidify his standing as a leading researcher in his field. His current trajectory suggests a promising future, with the potential to make significant contributions to civil engineering and structural dynamics.

Dr. Mostafa Khalil | soil dynamics | Academic Achiever in Materials Mechanics Award

Dr. Mostafa Khalil | soil dynamics | Academic Achiever in Materials Mechanics Award

Dr. Mostafa Khalil, Housing and Building National Research Center, Egypt

Dr. Mostafa Said Yousef Khalil, a Ph.D. student and Assistant Lecturer at the Building Materials Research and Quality Control Institute, HBRC, Egypt, has a robust background in engineering. Graduating from Ain Shams University in 2011, he served as a Roadway Projects Manager Engineer at HBRC from 2014 to 2019. In 2019, he earned his M.Sc. in Geotechnical Engineering. Since April 2019, he has been an Assistant Lecturer at HBRC. Commencing his doctoral studies in March 2020 at Ain Shams University, Dr. Khalil continues to contribute significantly to the field of geotechnical engineering.

 

Professional Profiles:

Google Scholar

 

Education and Early Career 📚

I graduated from Ain Shams University in 2011, embarking on a career that would soon highlight my expertise and leadership. From 2014 to 2019, I served as a Roadway Projects Manager Engineer at HBRC, showcasing my skills in project management and engineering excellence.

Academic Pursuits and Professional Growth 🎓

In 2019, I earned my M.Sc. in Geotechnical Engineering, a testament to my commitment to advancing my knowledge and skills. Since April 2019, I have been working as an Assistant Lecturer at the Material and Quality Control Institute at HBRC, imparting knowledge and guiding the next generation of engineers.

Doctoral Studies and Ongoing Contributions 🎓

In March 2020, I commenced my doctoral studies at Ain Shams University, further deepening my expertise in geotechnical engineering. My journey continues as I strive to contribute significantly to the field, combining academic rigor with practical experience to drive innovation and quality in engineering.🌟 Dr. Mostafa Said Yousef Khalil is a dedicated professional, continuously pushing the boundaries of engineering and contributing to the field with passion and expertise.

📖 Publications Top Note :

Lean Talent Management: A Novel Approach for Increasing Creativity in Architectural Design Firms

Authors: AAE Othman, MHM Khalil

Journal: Engineering, Construction and Architectural Management

Citations: 29

A Lean Talent Management Framework for Maximizing Creativity in Architectural Design Firms

Authors: AAE Othman, MHM Khalil

Journal: International Journal of Construction Management

Citations: 16

Talent Management: A Novel Approach for Developing Innovative Solutions Towards Heritage Communities Development

Authors: M Khalil, H Elsaay, A Othman

Journal: Archnet-IJAR: International Journal of Architectural Research

Citations: 14

Museum Visitors Learning Identities Interrelationships with Their Experiences

Authors: KKH ElDamshiry, MHM Khalil

Conference: Green Heritage Conference

Citations: 8

Creative Identities: From Divergence to Fusion in Cultural Exhibits to Overcome Human-Related Cultural Heritage Deterioration

Authors: MHM Khalil, KKH ElDamshiry

Conference: Green Heritage Conference

Citations: 3

Divergent Heritage Sustainability: A Threefold Approach Through Lean Talent Management

Authors: AAE Othman, MH Khalil

Journal: Journal of Engineering, Design and Technology

Citations: 2