Prof. nadim baba | prosthodontics | Best Researcher Award
Professor at Loma Linda University, United States
Prof. nadim baba is a highly accomplished prosthodontist with extensive academic and clinical experience. After completing a D.M.D. from the University of Montréal and advanced prosthodontic training at Boston University, they have contributed significantly to dental education and practice globally. Prof. nadim baba has held academic positions at renowned institutions such as Loma Linda University and Saint-Joseph University and is currently an adjunct professor at The University of Texas Health Science Center. Their leadership extends to directing the Hugh Love Center for Research and Education in Technology and serving in key roles in national and international prosthodontic organizations. In private practice, they specialize in prosthodontics, providing expert care. Prof. nadim baba ‘s research has focused on restorative and implant-supported prosthodontics, earning them recognition within the dental community.
Publication Profile
Education 🎓📜
Prof. nadim baba began their educational journey with a B.A. from Concordia University in 1995, followed by earning a D.M.D. from the University of Montréal in 1996. Pursuing advanced studies, they completed a Certificate of Advanced Graduate Study (CAGS) and a Master of Science (M.S.) in Prosthodontics at Boston University’s Goldman School of Dental Medicine in 1999. Their educational foundation established their path toward becoming a prosthodontic specialist. Prof. nadim baba is licensed by the Ordre des Dentistes du Québec, the Dental Board of California, and certified as a Diplomate of the American Board of Prosthodontics, further solidifying their expertise. With these credentials, they are well-prepared to combine clinical practice with academic contributions, shaping the future of dental education and innovation in prosthodontics.
Experience 🦷👨🏫
Prof. nadim baba brings a wealth of experience from both academic and clinical settings. Starting as a Clinical Instructor at Boston University, they expanded their teaching career internationally, holding faculty positions at Saint-Joseph University in Beirut and later at Loma Linda University in California. They have served as a professor and leader in dental education, most notably as the Director of the Hugh Love Center for Research and Education in Technology. In private practice,Prof. nadim baba has experience in Beirut, Lebanon, and currently runs a part-time practice in Glendale, California, specializing in prosthodontics. Their clinical and academic roles reflect their dedication to advancing dental practice and education, influencing both the next generation of dental professionals and prosthodontic innovation.
Awards and Honors 🏆
Prof. nadim baba has been recognized for their leadership and contributions to prosthodontics with several prestigious awards and honors. They have served as the President of the American College of Prosthodontists (ACP) from 2018-2019, following previous roles as Vice President and President-Elect. Their leadership within the ACP also includes chairing multiple committees such as the Continuing Dental Education Compliance Committee and the Program Committee. Prof. nadim baba has been a dedicated member of numerous professional organizations, contributing to the advancement of prosthodontics. In recognition of their academic impact, they were appointed as Section Editor for the Journal of Esthetic and Restorative Dentistry in 2023. Their accolades highlight a commitment to excellence in both clinical practice and dental education.
Research Focus 🔬
Prof. nadim baba’s research focuses on the restoration of endodontically treated teeth, removable and implant-supported prosthodontics, and the application of CAD/CAM technology in dental restorations. They have been particularly interested in the accuracy and longevity of dental materials used in both traditional and digital prosthodontic applications. Their work has explored the clinical outcomes of using advanced dental technology, including CAD/CAM systems for creating precise and durable dental restorations. Prof. nadim baba has mentored several graduate students on projects related to implant positioning accuracy, bond strength in denture adhesives, and the color stability of resin materials. Their research contributes to enhancing patient outcomes and advancing the field of digital dentistry.
Publication Top Notes
Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques
BJ Goodacre, CJ Goodacre, NZ Baba, MT Kattadiyil
The Journal of Prosthetic Dentistry, 116(2), 249-256 (2016) – Cited 479 times.
Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting
MT Kattadiyil, R Jekki, CJ Goodacre, NZ Baba
The Journal of Prosthetic Dentistry, 114(6), 818-825 (2015) – Cited 305 times.
CAD/CAM complete dentures: a review of two commercial fabrication systems
MT Kattadiyil, CJ Goodacre, NZ Baba
Journal of the California Dental Association, 41(6), 407-416 (2013) – Cited 282 times.
Comparison of retention between maxillary milled and conventional denture bases: A clinical study
A AlHelal, HS AlRumaih, MT Kattadiyil, NZ Baba, CJ Goodacre
The Journal of Prosthetic Dentistry, 117(2), 233-238 (2017) – Cited 204 times.
Current techniques in CAD/CAM denture fabrication
NZ Baba, HS AlRumaih, BJ Goodacre, CJ Goodacre
General Dentistry, 64(6), 23-28 (2016) – Cited 199 times.
A comparison of the surface properties of CAD/CAM and conventional polymethylmethacrylate (PMMA)
ZN Al-Dwairi, KY Tahboub, NZ Baba, CJ Goodacre, M Özcan
Journal of Prosthodontics, 28(4), 452-457 (2019) – Cited 175 times.
A comparison of the flexural and impact strengths and flexural modulus of CAD/CAM and conventional heat-cured polymethyl methacrylate (PMMA)
ZN Al-Dwairi, KY Tahboub, NZ Baba, CJ Goodacre
Journal of Prosthodontics, 29(4), 341-349 (2020) – Cited 169 times.
CAD/CAM complete denture systems and physical properties: A review of the literature
NZ Baba, BJ Goodacre, CJ Goodacre, F Müller, S Wagner
Journal of Prosthodontics, 30(S2), 113-124 (2021) – Cited 153 times.
Nonmetallic prefabricated dowels: A review of compositions, properties, laboratory, and clinical test results
NZ Baba, G Golden, CJ Goodacre
Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry, 18 (2009) – Cited 135 times.
Comparison of denture tooth movement between CAD-CAM and conventional fabrication techniques
BJ Goodacre, CJ Goodacre, NZ Baba, MT Kattadiyil
The Journal of Prosthetic Dentistry, 119(1), 108-115 (2018) – Cited 107 times.
Effect of nanodiamond addition on flexural strength, impact strength, and surface roughness of PMMA denture base
FA Al-Harbi, MS Abdel-Halim, MM Gad, SM Fouda, NZ Baba
Journal of Prosthodontics, 28(1), e417-e425 (2019) – Cited 97 times.
Effect of inlays, onlays and endocrown cavity design preparation on fracture resistance and fracture mode of endodontically treated teeth: An in vitro study
C Kassis, P Khoury, CZ Mehanna, NZ Baba, F Bou Chebel, M Daou
Journal of Prosthodontics, 30(7), 625-631 (2021) – Cited 92 times.
Using Intraoral Scanning to Capture Complete Denture Impressions, Tooth Positions, and Centric Relation Records
BJ Goodacre, CJ Goodacre, NZ Baba
International Journal of Prosthodontics, 31(4) (2018) – Cited 90 times.
Gingival displacement for impression making in fixed prosthodontics: contemporary principles, materials, and techniques
NZ Baba, CJ Goodacre, R Jekki, J Won
Dental Clinics, 58(1), 45-68 (2014) – Cited 87 times.
Restoration of endodontically treated teeth: contemporary concepts and future perspectives
NZ Baba, CJ Goodacre
Endodontic Topics, 31(1), 68-83 (2014) – Cited 77 times.
Restoration of endodontically treated teeth: the seven keys to success
NZ Baba, CJ Goodacre, T Daher
General Dentistry, 57(6), 596-603; quiz 604 (2009) – Cited 76 times.
Stainability of acrylic resin materials used in CAD-CAM and conventional complete dentures
FD Al-Qarni, CJ Goodacre, MT Kattadiyil, NZ Baba, RD Paravina
The Journal of Prosthetic Dentistry, 123(6), 880-887 (2020) – Cited 73 times.
A comparison of the surface and mechanical properties of 3D printable denture-base resin material and conventional polymethylmethacrylate (PMMA)
ZN Al-Dwairi, AA Al Haj Ebrahim, NZ Baba
Journal of Prosthodontics, 32(1), 40-48 (2023) – Cited 67 times.
Materials and processes for CAD/CAM complete denture fabrication
NZ Baba
Current Oral Health Reports, 3, 203-208 (2016) – Cited 63 times.
Fracture resistance and failure mode of fatigued endodontically treated teeth restored with fiber-reinforced resin posts and metallic posts in vitro
FA Al-Harbi, D Nathanson, SM Morgano, NZ Baba
Dental Traumatology, 30(4), 317-325 (2014) – Cited 60 times.
Conclusion
The candidate is exceptionally well-suited for the “Best Researcher Award” due to their extensive academic achievements, leadership in professional organizations, significant contributions to prosthodontics education, and sustained commitment to private practice. While there is always room to broaden research collaboration and publishing efforts, their established reputation, contributions to advanced dental education, and clinical research make them a strong contender for this accolade.