Omer SaidToker | Mechanics of Functional Materials and Structures | Best Researcher Award

Posted on by ScienceFather

Assoc Prof Dr Omer  SaidToker; Leading Researcher in Mechanics of Functional Materials and Structures

Associate Professor Dr. Omer Said Toker is a highly respected faculty member at Yildiz Technical University. With a strong background in his field and a dedication to academic excellence, Dr. Toker has made significant contributions to the university’s academic and research endeavors. His expertise lies in [insert specific field or specialization], where he has demonstrated exceptional knowledge and skill. Dr. Toker is known for his passion for teaching and his ability to inspire and mentor students. His research interests and contributions have earned him recognition in the academic community, making him a valuable asset to Yildiz Technical University.

Professional Profiles:

Education:

Dr. Omer Said Toker is an Associate Professor at Yildiz Technical University, known for his expertise in [insert specific field or specialization]. He has made significant contributions to the university’s academic and research endeavors, earning recognition in the academic community. Dr. Toker is dedicated to fostering a stimulating learning environment and is passionate about mentoring students. His academic journey includes a Doctorate from Namık Kemal Üniversitesi, Mühendislik Fakültesi, Gıda Mühendisliği Bölümü, Turkey, from 2012 to 2016, a Postgraduate degree from Erciyes University, Mühendislik Fakültesi, Gıda Mühendisliği Bölümü, Turkey, from 2009 to 2012, and an Undergraduate degree from Middle East Technical University, Faculty of Engineering, Department of Food Engineering, Turkey, from 2003 to 2008.

Courses and Trainings:

  Education Management and Planning ,ReolojiEğitimi, AntonPaar, 2014

Research Interest:

FoodEngineering, FoodTechnology, Sugars,Syrups, Starches andCandy, Cocoa and ChocolateProducts

Award and Honor:

KaradağA., MetinYıldırımR., TokerÖ.S., 2024-EşikÜstüÖdülü, Tübitak,May2019

Academic Titles / Tasks:

AssociateProfessor, YildizTechnicalUniversity, FacultyOfChemıcal And Metalurgıcal Engıneerıng, Department Of Food Engineering, 2020 -Continu
AssistantProfessor, YildizTechnicalUniversity, FacultyOfChemıcal And Metalurgıcal Engıneerıng, Department Of Food Engineering, 2018 -Continues
AssistantProfessor, YildizTechnicalUniversity, FacultyOfChemıcal And Metalurgıcal Engıneerıng, Department Of Food Engineering,2017 -2018
ResearchAssistant, YildizTechnicalUniversity,  FacultyOfChemıcal And Metalurgıcal Engıneerıng,Department Of Food Engineering,2013 -2017
ResearchAssistant,  IgdirUniversity, MühendsilikFakültesi, GıdaMühendisliği, 2012 -2013
ResearchAssistant, ErciyesUniversity, MühendsilikFakültesi, GıdaMühendisliği, 2010 -2012
ResearchAssistant, IgdirUniversity, MühendsilikFakültesi, GıdaMühendisliği, 2009 -2010

Publications Top Notes:

I. Modification of chia (Salvia hispanica L.) seedmucilage (a heteropolysaccharide) by atmospheric pressure cold plasma jet treatment Mutlu S.,PalabiyikI.,KopukB.,GunesR.,BolukE.,BAĞCIU.,ÖZMEND.,TOKERÖ.S.,KONARN. FoodBioscience,vol.56,2023 (SCI-Expanded) I . Production and characterization of probiotic jel y candy containing Bacil us species KahramanB.,KorkmazK.,DaştanD.,TokerÖ.S.,DertliE.,ArıcıM. Journalof FoodMeasurementandCharacterization,vol.17,no.6,pp.5864-5873,2023 (SCI-Expanded)
I I. Importance of rheological properties in enrobing efficiency of dark chocolate: application in wafer products ErturalG. I.,GunesR.,TOKERÖ.S.,PalabiyikI.,KONARN.,SAĞDIÇO. International Journalof Food Science andTechnology,vol.58,no.11,pp.5938-5946,2023 (SCI-Expanded)
IV. Gelatin production fromturkey (Meleagris gal opavo) skin as a newsource: fromwaste to a sustainable food gel ing agent OzcanY.,KurtA.,ÖZMEND.,TOKERÖ.S. Journalof the Science of Food andAgriculture,vol.103,no.11,pp.5511-5520,2023 (SCI-Expanded)
V. Investigation of cold plasma technique as an alternative to conventional alkalization of cocoa powders PalabiyikI.,KopukB.,TokerÖ.S.,KonarN. INNOVATIVEFOODSCIENCEANDEMERGINGTECHNOLOGIES,vol.88,no.1,pp.103440,2023 (SCI-Expanded)  

Dr Arely Cano | Mechanics of Functional Materials and Structures.

Posted on by ScienceFather
Dr Arely Cano: Leading Researcher in Mechanics of Functional Materials and Structures.
Dr Arely Cano, PhD, Advanced Technology  .

Dr. Arely Cano, a distinguished PhD holder in advanced technology, stands at the forefront of groundbreaking research in the mechanics of functional materials and structures. With an illustrious career, Dr. Cano has become a trailblazer, contributing significantly to the field’s advancements. Her expertise extends across intricate realms, encompassing innovative technologies and the nuanced understanding of materials’ mechanical behavior. As a respected leader, Dr. Cano’s work not only propels the boundaries of knowledge but also inspires the next generation of researchers to delve into the fascinating intersections of technology, materials, and structure.

 

Professional Profiles:

 

 

The impact of her research is evident in citation metrics and indices from google scholar:

Cited by : All-354

citations- 342

h-index-10

 

Education:

  • PhD, Advanced Technology Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2015-12/2018 Mexico City, Mexico -Thesis: “An XPS study of Prussian blue Analogues and Related Coordination Compounds”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Luis Lartundo (SNI II) (llartundo@ipn.mx)Master’s degree, Advanced Technology Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2013-12/2014 Mexico City, Mexico -Thesis: “Study of an atypical transition metal nitroprussides”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Adela Lemus (SNI II) (alemuss@ipn.mx)Bachelor’s’ degree, Industrial Chemical Engineering Escuela Superior en Ingeniería Química e Industrias Extractivas (ESIQIE), National Polytechnic Institute 08/2008-12/2012 Mexico City, Mexico -Degree obtained with the Master´s thesis: “Study of an atypical transition metal nitroprussides”. Advisor. Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) and Dr. Adela Lemus (SNI II) (alemuss@ipn.mx)

 

Synchrotron Project:

Accepted internal proposal for Beam time run September-October/2022 (1 month) Surface structure and chemical composition study of Nb for quantum materials applications: 3D and 2D resonators Author(s): A. Cano, D. Bafia, Z. Sung, M. Martinello, S. Posen, A. Romanenko, A. Grassellino and J. R. Zuazo European Synchrotron Radiation Facility, Spline Spanish beam-station, ESRF, France Contact: Beam-scientist PhD Juan R. Zuazo, Beam-scientist PhD German Castro Accepted proposal for Beam time run November/2021 (2 year)

Electronic and structural changes in Nb SRF material under cryogenic conditions through combined HAXPES/GIXRD data Author(s): A. Cano, Z. Sung, D. Bafia, T. Spina, M. Martinello, S. Posen, A. Grassellino, A. Romanenko European Synchrotron Radiation Facility, Spline Spanish beam-station, ESRF, France Contact: Beam-scientist PhD Juan R. Zuazo, Beam-scientist PhD German Castro Accepted proposal for Beam time run Feb/2021(1 year)

Tracing microstructural changes in SRF Nb-matrix under cooling/heating cycles through HighResolution XRD powder patterns analysis Author(s): A. Cano, D. Bafia, J. Lee, Z. Sung, M. Martinello, A. Romanenko Advanced Photon Source-Argonne National Laboratory, IL, USA Contact: Beam-scientist Jennia Karapetrova

 

Research Experience:

  • Postdoctoral Research Associate Fermi National Accelerator Laboratory 06/2019-Present Batavia, IL, USA Applied Physics and Superconducting Division (APS/TD) -Research Project: Surface structure and chemical composition of the near-surface of SRF cavities based on Nb and Nb3Sn Superconducting Quantum Materials and System Center (SQMS) -Research Project: Unraveling the local surface structure in 2D and 3D Nb superconducting resonators and examining its potential impact on TLS losses Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), PhD Martina Martinello (martina9@stanford.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov) and PhD. Akshay Murthy (amurthy@fnal.gov) -Design of multi-technique surface analysis platform based on X-ray photoelectron spectrometer with HeL manipulator. Supervisors:Senior Researcher Anna Grasellino (annag@fnal.gov), Senior Scientist Alexander Romanenko (aroman@fnal.gov), PhD Mattia Checchin (checchin@stanford.edu) User facilities/Postdoctoral Research Associate European Synchrotron Radiation Facilities 11/2021-10/2022 Grenoble, France Spline Spanish Beamline -Research Project: Surface structure study of Nb for quantum materials applications: 3D and 2D resonators Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), Beam-scientist PhD Juan R. Zuazo (rubio@esrf.fr), PhD Martina Martinello (martina9@stanford.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov) User facilities/Postdoctoral Research Associate Advanced Photon Source-Argonne National Laboratory 11/2020-11/2021 Lemont, IL, USA 33-BM-C -Research Project: Tracing microstructural changes in SRF Nb-matrix upon cooling/heating cycles by cryo-GI-XRD Supervisors: Senior Scientist Alexander Romanenko (aroman@fnal.gov), Beam-scientist M. Sc. Evguenia Karapetrova (jenia@anl.gov), PhD Martina Martinello (martina9@stanford.edu), PhD Tiziana Spina (spina.tiziana@as-g.it) User facilities/ Postdoctoral Research Associate Northwestern University 07/2019-Present Evanston, IL, USA NU Atomic and Nanoscale Characterization Experimental Center (NUANCE) -Research Project: Chemical composition mapping of the inner surface of SRF cavities cutouts using Electron Spectroscopies and Microscopy Supervisors:Senior Researcher Anna Grasellino (annag@fnal.gov), PhD Martina Martinello (martina9@stanford.edu) and PhD Xinqi Chen (xchen@northwestern.edu) Integrated Molecular Structure Education and Research Center (IMSERC) -Research Project: Evaluation of the Surface structure of Nb cavities cutouts processed with state-of-the-art RF surface treatments using X-ray diffraction techniques and TG-MS Supervisors: PhD Martina Martinello (martina9@stanford.edu) and Senior Scientist Christos Malliakas (cmalliakas@northwestern.edu) User facilities/ Postdoctoral Research Associate Minnesota University 07/2021-Present Minnesota, MN, USA XPS instrument, Characterization facility, CharFac -Research Project: Thermal evolution of the native oxide layer on Nb3Sn-coated Nb SRF grade. An In-situ angular XPS study Contact: PhD Bing Luo (luox0026@umn.edu), Senior Scientist Grigory Eremeev (grigory@fnal.gov)and Senior Scientist Sam Posen (sposen@fnal.gov) Invited Researcher Research Center for Applied Sciences and Advanced Technology, National Polytechnic Institute 01/2019-06/2019 Mexico City, Mexico National Laboratory in Energy Conversion and Storage, LNCAE -Research collaboration: Mentoring of undergraduate/graduate thesis and Electron spectroscopy (XPS) trainings Contact: Scientist Emeritus Edilso F. Reguera Ruiz (edilso.reguera@gmail.com) Visiting Researcher Institute for Nuclear Research, Hungarian Academy of Sciences 02/2016-07/2016 Debrecen, Hungary Laboratory of Electron Spectroscopy and Materials Science -Research Project: XPS study of Coordination Chemistry at the Nanoparticles Surface Contact: PhD László Kövér (lkover15@gmail.com), PhD József Tóth (toth.jozsef@atomki.mta.hu) Visiting Researcher Malaga University 09/2015-12/2015 Malaga, Spain Department of Inorganic Chemistry.

    Crystallography and Mineralogy -Developed project: Systematic XPS Study of Molecular Nano-porous Materials with Potential Applications in Renewable Energy Technologies Contact: Dr. Enrique Rodríguez Castellón (castellon@uma.es) Visiting Researcher Center for Nanoscience and Micro/Nanotechnologies, National Polytechnic Institute 06/2014-06/2015 Mexico City, Mexico National Laboratory of characterization of materials and nanostructures -Developed project: Advanced training in Surface Analysis using XPS spectroscopy Contact: PhD Luis Lartundo Rojas (SNI II) (llartundo@ipn.mx) Visiting undergraduate student Research Center for Applied Chemistry, CIQA 01/2012-02/2012 Saltillo, Mexico Department of Plastic Transformation Processes -Developed project: Synthesis, characterization, and monitoring phase inversion of high impact polystyrene (HIPS). Contact: Dr. Graciela E. Morales Balado (SNI II) (graciela.morales@ciqa.edu.mx) and Dr. Florentino Soriano Corral (SNI I), (florentino.soriano@ciqa.edu.mx) Internship undergraduate student Research Center for Applied Chemistry, CIQA 01/2011-02/2011 Saltillo, Mexico Department of organometallic materials synthesis -Developed project: Morphology control of Zn-oxides nanoparticles for automotive applications Contact: Dr. Graciela E. Morales Balado (SNI II) (graciela.morales@ciqa.edu.mx), Dr. Pablo Acuna (SNI I) (pablo.acuna@ciqa.edu.mx)

 

Publications and Top Noted:

First direct observation of nanometer size hydride precipitations on Superconducting Niobium Author(s): Z-H. Sung, A. Cano, A. Murthy, E. Karapetrova, J-Y. Lee, A. Grassellino and A. Romanenko arXiv Preprint arXiv:2305.01022